|
Core-to-core fiber alignment using profile alignment system (PAS)
Full
automatic rotational alignment for PANDA and 3M TigerTM fibers using profile
alignment system (PAS)
Full automatic rotational alignment for all types of
PM fiber using Remote Injection & Detection System
(RIDS)
This unit has the following
specifications:
Applicable fibers: PM
(Polarization maintaining), SM (Single-mode), MM (Multi-mode) fibers
Fiber
cleave length
Outer coating diameter 250um : 10 to 16
mm
Outer coating diameter between 250um - 1000um : 16mm
Actual
average splice loss
Typical 0.03dB with SM fiber and Typical 0.02dB
with MM fiber
The fibers comply with ITU-T G.652 and G.651 respectively
measured by cut-back method on ITU-T and IEC standards 0.07dB with Panda fiber
0.07dB with 3M TigerTM fiber.
Extinction ratio
> 30dB
with PANDA to PANDA
> 30dB with 3M TigerTM to 3M TigerTM
> 27dB with
PANDA to 3M TigerTM
Return loss: > 60
dB
Splice modes for PM fibers
P1: Cladding axis alignment
/ Rotational alignment with PAS for PANDA to PANDA, 3M TigerTM to 3M TigerTM and
PANDA to 3M Tiger TM
P2: Core axis alignment with RIDS / Rotational alignment
with PAS for all types of PM fibers
P3: Core axis and rotational alignment
with RIDS for all types of PM fibers
|
