|
FSM-30R
The FSM-30R offers Fujikura mass fusion technology in an extremely small and
lightweight mini-splicer. This splicer has the capability to splice single
fibers as well as ribbons up to 12 fibers. A wind protection hood, ambient
condition sensors, and slide-in modular powering units provide unprecedented
mass fusion splicing in remote and outdoor splicing locations. The FSM-30R
offers a quick 30-second splicing time.
Features:
- Wind protector design withstands 30 mph cross wind
- Built-in programmable tube heater
- Slide-in power modules include AC adapter, battery or camcorder battery
adapter
- Automatically adjusts fusion arc to compensate for differences in
atmospheric pressure or altitude
- Large image magnifi cation on low-glare 5” color LCD monitor provides
great fiber visibility
Specifications:
| Fiber Splicing Capability |
SM, MM, NZ-DS (non-zero dispersion-shifted) &
DS fibers (capable of splicing 2, 4, 6, 8, 10, or 12 fibers
simultaneously, as well as single fiber splicing) |
| Splice Loss |
0.04dB for SM, 0.02dB for MM, 0.07dB for NZ-DS
fiber (typical) |
| Return Loss |
>60dB |
| Fusion Splices Per Battery Charge |
~30 (includes use of splice protection tube heater
& hot jacket stripping tool) |
| Splice Sleeve
Capability |
40mm mass splice sleeves, both 40mm & 60mm
single fiber splice sleeves, and |
| micro/mini sleeves (10 programmable tube heater
modes) |
| Altitude Compensation Function |
Fully automatic up to 3500 meters (11,500
feet) |
| Viewing Method |
5” LCD color monitor with 40X magnification,
external RCA jack for NTSC video signal |
| Operating Temperature |
-10°C to +50°C |
| Storage Temperature |
-40°C to +80°C |
| Power Supply |
Modular bay accepts slide-in 12V 2.0 amp-hour
battery pack or slide-in AC adapter. |
| AC adapter accepts 100 to 240 VAC (50/60Hz).
Optional slide-in adapter for 12V 2.0 amp-hour camcorder
battery. |
| Dimensions (W x D x H) |
150mm x 150mm x 150mm (5.9” x 5.9” x
5.9”) |
| Weight |
2.8 kg (6.2 lbs) with AC adapter installed; 3.2 kg
(7.0 lbs) with battery installed |
| Splice Modes |
24 pre-programmed, 30 user
programmable |
GN Nettest TD-1000A Fiber Wizard
Specifications :
- Center Wavelength : 1310/1550nm +/- 20nm
- Max Spectral Width : < or = 20nm (Singlemode)
- Fiber TypeSingle Mode : 9/125u
- Distance Range : 1.2km; 4km; 9km; 20km; 40km; 81km; 164km
- Data Resolution : 0.313m, 0.625m, 1.25m, 2.5m, 5m, 10m, 20m
- Distance Accuracy : 0.0025% X distance +/- distance resolution
- Vertical Linearity : +/- 0.1 dB/dB to within 8 dB of the 98% noise floor
- Real Time Display Update : 2/sec pnd
- Dynamic Range : 1310nM : 30.5dB/1550nM: 27.5dB
- Measurement Range : 1320nM: 23.5dB/ 1550nM: 20.5dB
- Initial Reflective Deadzone (typ) : 3m @ 1310nM and 1550nM
- Initial Non-Reflective Deadzone (typ) : 15m @ 1310nM and 1550nM
- Display : 7 inch diagonal LCD with backlight
Options :
- Power Meter : 10dBm to -65dBm
- Light Source Modes : CW, 1kHz
& 2kHz
- Wavelength : 1310nM &
1550nM
- Power output : -10 dBm
- Stability : 0.2dB @ 8 hrs
- Connector type : Universal
Connector Interface with ST connector
- Data Storage : 1.44MB Floppy
Drive
Environmental Specifications :
- Operating Temperature : 0
ºC to 40 ºC
- Storage Temperature : -20
°C to +60 °C
- Operating Altitude : 5,000
ft
Mechanical & General Specifications :
- Size : 11.5" X 8.25" X 4.5"
- Weight : 9.0 LBS
Includes:
- Fujikura FSM-30R
- USFiberOptic USF-21 Fiber Cleaver
- (20) Fujikura FP-03 Fiber Splice Protection Sleeves
- Fujikra ADC-07 AC Adapter/Battery Charger
- Fujikura HJS-01 Hot Jacket Stripper
- HI-12 Fiber Holder Set
- Fujikura FH-250 Fiber Holder Set
- Miller Fiber Optic Strippers
- Plastic Screen Cover
- Power Cord
- User Manual On CD-ROM
- Hard Carrying Case
- GN Nettest TD-1000A Fiber Wizard
- Fiber Cables :
- TraceView OTDR Trace Viewing & Printing Software
- Battery Pack
- AC Adapter/Charger
- Power Cord
- RS-232 PC Interface Cable
- Hard Copy User Manual
- Hard Carrying Case
|
