|
Siecor CFSII Compact Fusion
Splicer
The Compact Fusion Set II incorporates the loss estimating
features of the award winning splicer, the Compact Fusion Set. Two
perpendicular views of the fibers are captured by a CCD camera and displayed at
100x magnification on a large 4-inch LCD. The image is then analyzed after the
splice and an estimated loss is determined and displayed.
The CFS II has a rubber base for added protection against minor
bumps and scratches.
This Unit Is Manual Alignment Only.
GN Nettest TD-1000A Fiber Wizard OTDR
Specifications :
- Center Wavelength : 1310/1550nm +/- 20nm
- Max Spectral Width : < or = 20nm (Singlemode)
- Fiber TypeSingle Mode : 9/125u
- Distance Range : 1.2km; 4km; 9km; 20km; 40km; 81km; 164km
- Data Resolution : 0.313m, 0.625m, 1.25m, 2.5m, 5m, 10m, 20m
- Distance Accuracy : 0.0025% X distance +/- distance resolution
- Vertical Linearity : +/- 0.1 dB/dB to within 8 dB of the 98% noise floor
- Real Time Display Update : 2/sec pnd
- Dynamic Range : 1310nM : 30.5dB/1550nM: 27.5dB
- Measurement Range : 1320nM: 23.5dB/ 1550nM: 20.5dB
- Initial Reflective Deadzone (typ) : 3m @ 1310nM and 1550nM
- Initial Non-Reflective Deadzone (typ) : 15m @ 1310nM and 1550nM
- Display : 7 inch diagonal LCD with backlight
Options :
- Power Meter : 10dBm to -65dBm
- Light Source Modes : CW, 1kHz
& 2kHz
- Wavelength : 1310nM &
1550nM
- Power output : -10 dBm
- Stability : 0.2dB @ 8 hrs
- Connector type : Universal
Connector Interface with ST connector
- Data Storage : 1.44MB Floppy
Drive
Environmental Specifications :
- Operating Temperature : 0
ºC to 40 ºC
- Storage Temperature : -20
°C to +60 °C
- Operating Altitude : 5,000
ft
Mechanical & General Specifications :
- Size : 11.5" X 8.25" X 4.5"
- Weight : 9.0 LBS
|
