3K52 - Superior FOFS-1 Fusion Splicer & Ando AQ-7155 OTDR

Superior FiberOpticX FOFS-1 Fusion Splicer

The SMP FiberOpticX Fusion Splicer is a reliable, compact precision instument that enables easy positioning and repeatable splicing of singlemode or multimode fibers. It is a low maintenance Unit with a disposable splice module that contains both fiber alignment v-grooves and arc electrodes.

Specifications:

Power Requirements	Internal Batteries - 6 x 12. VDC NiCad :C: Cells, 7.2VDC External Source - 12VDC, 800mA
Splice Capacity	50 Splices/charge typical (2800mAh NiCad Cells)
Battery Charge Time	10 - 12 hours (Built In Charger)
Output Power	7.2VDC
Fiber Type and Size
Material	Silica Glass
Types	Singlemode & Multimode
Cladding	125µm
Buffer	250µ - 900µm
Fiber Alignment	Precision Ceramic V-Groove / Splice Module
Arc Time	1.5 to 4.5 Seconds Adjustable on 0.3s steps
Arc Current	12 to 18mA, adjustable in 0.5mA steps
Splice Loss	Single-Mode:    =0.07dB typ Miltumode    =0.05dB typ
Load Test	Proof Load    1 lb (454g) Overload    1.25 x Proof Load
Dimensions	16.5cm x 20.3cm x 5.5cm (6.5" x 8" x 2.2")
Weight	2.3kg (5lbs)
Operating Temperature	0°C to +40°C (32°F to +104°F)
Storage Temperature	-10°C to +65°C (14°F to +149°F)
Humidity	10 to 95% Non Condensing
Viewing System	CCD Camera; 10cm LCD Monitor;100x magnification; NTSC video output jack
Display Time-Out	approx. 3 minutes idle
Unit Time-Out	approx. 5 minutes idle

Ando AQ-7150

The Ando AQ-7150 Series Mini-OTDR offers the following features:

• 1/5 the size and weight of existing full-size OTDR units.
• Measurement can be performed by the press of a single button.
• Battery operation allows the unit to be used in the field.
• Data can be stored on an PCMCIA memory card.  The data on the memory card can be analyzed on the IBM-compatible personal computer using emulation software (sold separately).
• SET UP conditions, data list and measured traces can be printed out.

With these features, this unit can be widely used to measure fiber cable from subscriber lines to repeater systems and has application from cable installation to restoration and maintenance.

Includes:

• Superior FiberOpticX FOFS-1 Fusion Splicer
• USFiberOptic USF-21 Fiber Cleaver
• (6) V-Groove / Electrode Replacement Modules
• Superior FOFSCO 2.5ohm Heat Shrink Oven w/ Power Cord
• Clauss Fiber Optic Strippers
• (20) Fiber Protection Sleeves
• Battery Pack
• AC Adapter/Charger
• DC Car Charger
• Hard Copy User Manual
• Hard Carrying Case