|
Fujikura FSM-20RS12 Arc Fusion Splicer
The FSM-20RS12 ARC Fusion Splicer is used to splice optical single fiber or
fiber ribbons. The FSM-20RS12 can splice up to 12 fiber ribbons.
This Fusion Splicer has installed a 4 inch LCD monitor and a heater for
spliced portion reinforcement. Besides, it has a built-in microprocessor to
perform image processing so that automatic fusion splicing with estimated loss
can be achieved. This Fusion Splicer can use AC100-240V 50/60Hz. (Max. 3A) or
DC12V (Max. 10A) power sources
Features
- Fiber Splicing Capabilities : SM, MM
- Splice Loss Estimation Function / Calculation Capability
- Atmosphere, humidity and temperature compensation functions
provided
- 3" LCD monitor with excellent view ability in direct sunlight
- Memory : 100 splice data sets with internal memory
- High Intensity Halogen Inspection Lamp
Fujikura FSM20RS Ribbon fusion splicer utilizes a PAS (Profile Alignment
System) that aligns the core of single-mode and the cladding of multimode
fibers. A built in monitor allows cross-sectional viewing of the prepared fiber
ends, and displays cleave angle and estimated splice loss. the system will
splice both single-mode and mult-mode fibers. Alignment, fusion and splice loss
estimation are automatically completed by the built-in computer. Applicable
fibers: SMF at 1310nm; DSF at 1550nm; GI fibers. Average splice loss: 0.03 dB
(SMF); 0.05 dB (DSF); 0.02 dB (GI). Includes a built-in tube heater for
installing splice protective sleeves. AC- or external 12 Vdc- powered
GN Nettest TD-1000A Fiber Wizard OTDR
Specifications :
- Center Wavelength : 1310/1550nm +/- 20nm
- Max Spectral Width : < or = 20nm (Singlemode)
- Fiber TypeSingle Mode : 9/125u
- Distance Range : 1.2km; 4km; 9km; 20km; 40km; 81km; 164km
- Data Resolution : 0.313m, 0.625m, 1.25m, 2.5m, 5m, 10m, 20m
- Distance Accuracy : 0.0025% X distance +/- distance resolution
- Vertical Linearity : +/- 0.1 dB/dB to within 8 dB of the 98% noise floor
- Real Time Display Update : 2/sec pnd
- Dynamic Range : 1310nM : 30.5dB/1550nM: 27.5dB
- Measurement Range : 1320nM: 23.5dB/ 1550nM: 20.5dB
- Initial Reflective Deadzone (typ) : 3m @ 1310nM and 1550nM
- Initial Non-Reflective Deadzone (typ) : 15m @ 1310nM and 1550nM
- Display : 7 inch diagonal LCD with backlight
Options :
- Power Meter : 10dBm to -65dBm
- Light Source Modes : CW, 1kHz
& 2kHz
- Wavelength : 1310nM &
1550nM
- Power output : -10 dBm
- Stability : 0.2dB @ 8 hrs
- Connector type : Universal
Connector Interface with ST connector
- Data Storage : 1.44MB Floppy
Drive
Environmental Specifications :
- Operating Temperature : 0
ºC to 40 ºC
- Storage Temperature : -20
°C to +60 °C
- Operating Altitude : 5,000
ft
Mechanical & General Specifications :
- Size : 11.5" X 8.25" X 4.5"
- Weight : 9.0 LBS
|
