Fujikura FSM-50R Fusion Splicer & CMA4500 OTDR
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Fujikura FSM-50R12
Features:
- Suitable for ribbon fiber splicing
- Splicing up to 12-fiber ribbon
- Cladding alignment with fixed V-grooves
- Dual-directional operating system
- Arc calibration-free system
- Automatic fiber loading system
- Large capacity slot-in battery
- Simple operation steps
Specifications:
Model | FSM-50R12: Mass fusion splicer up to 12-fiber |
Applicable fibers | SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655) |
Fiber Count | Single, 2, 4, 5, 6, 8, 10 and 12 |
Fiber cleaved length | 10mm |
Actual average splice loss | 0.05dB with SM, 0.02dB with MM,
0.08dB with DS, and 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards. |
Splicing time | Typical 20seconds |
Return loss | >>60dB |
Splicing modes | 40 user programmable modes and up to 60 modes for reference (factory predetermined setting). |
Splice loss estimate | Available |
Storage of splice result | The last 400 results to be stored in the internal memory. |
Fiber display | X / Y, or both X and Y simultaneously. |
Magnification | 35x |
Viewing method | Two CMOS cameras and 5.6inch color LCD monitor. |
Operating condition | 0 to 3,660m above sea level, 0 to 95%RH and -10 to 50チホ respectively. |
Mechanical proof test | 2N |
Tube heater | Built-in tube heater with 10 heating modes and up to 20 modes for reference. |
Tube heating time | Typical 40seconds with FP-04(T), 45seconds with FP-05 protection sleeves. |
Applicable protection sleeve length | 60mm and 40mm |
No.of splice/heating with battery | Typical 70 cycles with BTR-06(S) / Typical 140 cycles with BTR-06(L). |
Power supply | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-06(S)/(L). |
Terminals | USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack / NTSC. |
Wind protection | Max. wind velocity of 15m/s. |
Dimensions | 150W チ~150D チ~150H (mm) |
Weight | 2.2 kg (2.7kg including AC adapter ADC-11) |
GN Nettest CMA 4500
KEY BENEFITS
- Dedicated testing modes provide unparalleled ease-of-use
- Increase network revenue through accurate fiber characterization
- Solutions for Metro, CWDM, ultra-long haul and PON based, fiber-to-the-premise (FTTP) deployments
- Sophisticated analysis software provides consistent and accurate fiber characterization
What if you took the market share leading OTDR and merged it with the industryメs most advanced testing platform? The result is the new CMA 4500.
Building on the success of its award winning CMA 4000 OTDR and CMA 5000 advanced testing platform, NetTest proudly introduces the next generation in OTDR testing - the CMA 4500.
You can have it all with the CMA 4500
A
powerful Windows based unit, large high resolution color display that's easy to
read indoors or out, touch screen and hard key user interfaces and several
optics options to cover any testing requirements from single mode to multimode,
from 10 meters to 250 Km. Additional features include USB ports, a 10/100
Ethernet interface and dedicated testing modes for unparalleled ease of use and
flexibility.
Whether you're a first time user or industry veteran, the CMA 4500 will take fiber installation, maintenance and documentation of your optical network to a new level.
Added value through performance
As added
value, the CMA 4500 can be equipped with a stabilized light source and power
meter for complete end-to-end loss testing. In addition, a Visual Fault Locator
(VFL) option enables users to visually locate breaks within central offices and
quickly identify specific fibers within a cable or splice tray. Round this out
with the optional connector inspection microscope to reduce costly and timely
troubleshooting of connector related issues and your CMA 4500 quickly becomes
the one tool you rely on to get your customers up and running.
Dedicated, User Friendly Software Construct OTDR
Designed for fiber installation and commissioning, Construction mode eliminates the time consuming, repetitive tasks of parameter selection, analyzing and file saving. A wizard guides the user through a couple quick set-up steps, then manages the entire testing operation requiring the user to do little more than connect the next fiber - it even tells you which one to connect. Testing parameters, wavelengths, file storage information and analysis options are configured once to allow the user to concentrate on testing, not button pressing.
Standard OTDR
For experienced users who
want more control while performing traditional OTDR functions, Standard OTDR
features the ability to manually set all, some or none of the testing parameters
providing unsurpassed parameter optimization. Key parameters such as wavelength,
pulse width, range/resolution and averaging mode can easily be set via the CMA
4500's touch screen or dedicated hard key interfaces. Data storage can also be
configured just the way you like it with virtually no limits on file names, or
storage space with the standard 20GB hard drive and your choice of file formats
- native NetTest or either revision of the Telcordia universal file format
(GR-196 or SR-4731). Additional features such as the ability to overlay up to
eight traces simultaneously, four display options and user selectable loss modes
ensure that you have all the tools you need to succeed in testing your
network.
Specifications
Fiber Type | Single-mode | Multimode (62.5ᄉm) |
Center Wavelength | 1310 nm ᄆ20 nm 1550 nm ᄆ20 nm |
850 nm ᄆ30 nm 1300 nm ᄆ30 nm |
Spectral Width (RMS) |
1310 nm: <15 nm 1550 nm: <15 nm |
850 nm: <15 nm 1300 nm: <15 nm |
Dynamic Range | 1310 nm: 35 dB 1550 nm: 35 dB |
850 nm: 24 dB 1300 nm: 26 dB |
Initial
Reflective Deadzone |
1310 nm: 5 m 1550 nm: 5 m |
850 nm: 5 m 1300 nm: 5 m |
Initial
Non-Reflective Deadzone |
1310 nm: 10 m 1550 nm: 10 m |
850 nm: 7 m 1300 nm: 8.5 m |
Linearity | 0.04 dB/dB | 0.04 dB/dB |
Pulsewidth | 5 ns to 20 ᄉs | 5 ns to 1 ᄉs |
Distance Resolution | 0.0001 km, 0.1 m, 1 ft, 0.0001 mi | |
Distance Range Setting | 5, 20, 50, 125, 250, 300 km | |
Loss Resolution | 0.001 dB | |
Distance Sampling | 0.125, 0.25, 0.5, 1, 2, 4, 8, 16 m | |
Data Points | Up to 256,000 | |
Distance Accuracy | 0.0025% of distance
measurement ᄆ distance resolution ᄆ index uncertainty | |
Laser Safety | Meets IEC60825-1 Class I and CDRH Class 1 Requirements (Eye Safe) 21 CFR 1040 | |
Optical Connector | Universal (Uses UC-130-XX adapters) |
Fujikura AFL FSM-50R12 Singlemode Multimode Fiber Ribbon Fusion
Splicer
&
GN Nettest CMA4500 Singlemode 1310/1550nm & Multimode
850/1300nm Fiber OTDR
Dynamic Range
1310/1550 nm : 35/35 dB
850/1300 nm : 24/26 dB
Includes A Fujikura CT-20 High Precision Fiber Cleaver, (2) Hard Carrying Cases & Accessories As Listed!
- Fujikura FSM-50R12 Arc Fusion Splicer
- Fujikura CT-20 High Precision Fiber Cleaver w/ Hard Case
- Fitel S218 Hot Jacket Stripper w/ AC Adapter
- Fujikura Single Fiber Holder Sets:
- FH-50-250
- FH-50-900
- Fujikura Ribbon Fiber Holder Sets:
- FH-50-4
- FH-50-6
- FH-50-8
- FH-50-12
- Clauss CFS-2 Fiber Optic Stripper
- (20) Fiber Protection Sleeves
- Protective Screen Cover
- Spare Electrode Set
- Fujikura BTR-06 Battery Pack
- Fujikra ADC-11 AC Adapter/Battery Charger
- DCC-10 Battery Charger Cable
- (2) Power Cords
- USB PC Interface Cable
- Fujikura FSM-50R Recorder Software
- User Manual On CD-ROM
- Hard Carrying Case w/ Strap
- GN Nettest CMA 4500 SM/MM OTDR
- SingleMode
- 1310nm
- 1550nm
- MultiMode
- 850nm
- 1300nm
- SingleMode
- Fiber Cables:
- (2)SM ST-ST
- (2) MM ST-ST
- AC Adapter/Charger
- Power Cord
- Keyboard
- Stylus
- Cat 5E Patch Cable
- OTDR Emulation Software
- User Manual On CD-ROM
- Hard Carrying Case