KeyTek ESD-1 2000 kit with accessories

KeyTek ESD-1 2000 Series Simulation Test System

Fluke 773 kit with accessories

Fluke 773 Milliamp mA Process Clamp Meter

Huntron Tracker 2700S Component Circuit Analyzer

$0.00
Availability: Out of stock
SKU
HU02

Condition: Refurbished / Calibrated

Warranty: 90 Day Exchange

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

 Huntron Tracker 2700S Circuit Analyzer

Trusted technology, new applications
The Huntron® Tracker® 2700S extends the capabilities of power-off testing to troubleshoot low voltage logic circuitry. Its low voltage ranges also make it ideal for testing passive devices such as high value capacitors while still in-circuit. Source voltage, source resistance and test frequency are clearly defined on the front panel overlay. The Tracker 2700S can scan and compare up to 40 pins per channel using standard IC clips and cables. Comparison can take place manually or automatically allowing you to pick out the signatures differences quickly. A variable 5 volt DC Voltage Generator allows the user to switch gate-fired devices such as SCRs and optical couplers so they can be tested in on and off states. The Huntron Tracker 2700S is an ideal addition to the service engineerメs bench. Using a power-off test method known as Tracker Signature Analysis, it eliminates the risk of further circuit damage, which often occurs when power is applied.

The Tracker 2700S also incorporates Huntronメs SigAssistル feature which displays real-time numeric information relating directly to the displayed signature. Information such as breakdown voltage, resistance, capacitance, and power are displayed on the LCD to assist in signature interpretation.

Troubleshooting challenges
Modern complex switching power supplies with fail-safe protection circuits contain many passive components that are difficult to test in circuit due to parallel solid state devices. The 200mV range of the Tracker 2700S allows resistors, capacitors and inductors to be analyzed without turning on the parallel solid state devices. The passive devices are essentially tested モout of circuitヤ. Todayメs electronic devices use 3 volt or lower logic circuits. The low test voltage ranges of the Tracker 2700S make it an ideal tool to troubleshoot these products. The Tracker 2700S has 21 selectable voltage/resistance ranges available in 5 frequencies resulting in a total 105 combinations of voltage, source resistance and test frequency.

Tracker Signature Analysis
The Tracker works by applying a current-limited AC signal across two points of a component. The current flow causes a vertical deflection of the trace, while the applied voltage causes a horizontal deflection. Together they form a unique V/I signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.


Features:
  • Color LCD for display of signatures and menus
  • Uses Huntron's proven Tracker Signature Analysis technology
  • Huntron SigAssist is incorporated into the display
  • Speed up troubleshooting by scanning and comparing up to 40 pins per channel
  • Perfect for benchtop or field repairs


Specifications:
Waveform Sine wave
Test Frequencies
5 selections of frequency:

20Hz, 50Hz, 60Hz, 200Hz, 2000Hz
Open circuit Voltage (VS ):
6 selections of peak voltage:

200mV, 3V, 5V, 10V, 15V, 20V
Source Resistance (RS ):
5 selections of resistance:

10?, 100?, 1k?, 10k?,100k?
Channels
Number 2
Display modes A, B, Alt
No. of scan pins/chan. 40
Scan modes manual or automatic
DC Voltage Generator
Level 0 to +5VDC
Source Resistance 25?
Maximum Current 200mA
Display
Color LCD 320x240 pixels
Power Requirements
Line Voltage 115VAC/230VAC
Frequency 50/60Hz
Power 40 Watts
Dimensions 11.5in W x 4.5in H x 10.8in D (29cm W x 11.4cm H x 27.4cm D)
Weight 6lbs (2.8kg)
Operating Temp 32°F to +104°F (0°C to +40°C)
Storage Temp -4°F to +140°F (-20°C to +60°C)




For full Huntron Tracker 2700S specifications, please click here: Huntron Tracker 2700S

Huntron Tracker 2700S Electronic Component Tester Circuit Analyzer

Its low voltage ranges make it ideal for testing passive devices such as high value capacitors while still in-circuit

The Tracker 2700S has 21 selectable voltage/resistance ranges available in 5 frequencies resulting in a total 105 combinations of voltage, source resistance and test frequency

Includes Accessories As Listed

2700

Huntron Tracker 2700S Tracker-2700S Circuit Diagnostic System Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 21920

  • Huntron Tracker 2700S Circuit Analyzer (BC# 21920)
  • Huntron Hard Point Test Leads (Red, Black)
  • (2) 40-Pin Ribbon Cables
  • (2) 40 Pin To 20 Pin Ribbon Cables
  • (2) LTC 40 40-Pin Clips
  • (2) LTC 20 20-Pin Clips
  • Huntron 40 Pin Static Plug Set P/N: 98-0288
  • (3) Hook Clip Cables (2-Black, 1-Blue)
  • Power Cord