GN NetTest CMA4000 CMA4453M kit with accessories

GN Nettest CMA4000 CMA4453M Long Haul Fiber OTDR

JDSU DSAM-3300 xt kit with accessories

JDSU Viavi DSAM-3300 xt Digital Meter DSAM-3300B w/ 11 Options!

IDEAL LANTEK II 1000 SM Fiber Cat5e Cat6 Cat6a Cable Certifier

$8,795.00
Availability: In stock
SKU
1L154

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Features

  • Best price/performance options - models ranging from 350 MHz to 1000 MHz for Category 6/ISO E through Category 7A/ISO FA certification
  • High speed testing saves time and money
  • Most internal memory available - store over 1700 Category 6/ISO E tests with graphs
  • Patented testing method - eliminate expensive permanent link adapters and test with patch cords for most installation
  • Extraordinary fast fiber testing with FiberTEK® FDX - the first dual wavelength, bidirectional fiber certification tool
  • Large, ultra-bright display - 4.3 in. wide screen display with white LED backlighting provides easy viewing of high-frequency data plots
  • 350 MHz & 500 MHz models are fully upgradable to 1000 MHz
  • Smart lithium-ion battery technology - 18 hour battery life with self calibrating â??fuel gaugeâ?? for accurate capacity readings

LanTEK II offers the best speed, performance and price available today. Nine second Cat 5E and 14 second Cat 6 tests with full performance data plus 10 Gigabit Alien Crosstalk testing thatâ??s more than 4x faster than other systems making LanTEK II the ultimate copper certification platform. The patented universal adapter system lets you certify most cabling with off-the-shelf patch cords saving time and money by eliminating the need for proprietary permanent link adapters.

The optional FiberTEK® FDX modules provide the worldâ??s only dual wavelength, bidirectional fiber certification available. Thatâ??s more than 3x faster than existing testers. Three models provide the needed performance without the added expense; choose from 350 MHz/Cat 6, 500 MHz/Cat 6A or 1000 MHz/Cat7A all with accuracy independently verified by ETL.

LanTEK II also offers ultimate versatility with options for certification of TERA, GG45 and EC7 category 7/7A systems, plus M12 industrial Ethernet and coaxial test adapters.

Universal Link Testing
The patented testing process eliminates the need for costly permanent link adapters. By using universal test adapters for Category 5E through 6A certification, patch cords are typically the only item that needs to be replaced when worn or damaged. This eliminates the wait and expense of proprietary adapters meaning more time is spent testing and less time searching for replacement parts.

Channel and Permanent Link Testing with One Adapter
Only LanTEK allows permanent link and channel certification without changing adapters. The patented DualMODEâ?¢ function allows cabling to be certified to two different standards with one press of the Autotest button; half the time it would take with any other certifier.

Certify cabling to both Category 6 permanent link and Category 6 channel link standards at the same time, satisfying requirements from cabling manufacturers and end users without costing any more time in the field. Or certify cabling to existing current standards and proposed future standards which eliminates retesting at a later date.

Fast Test Times
Category 5E certification in 11 seconds, Category 6 in 14 seconds, and Category 6A in only 16 seconds with graphs! Plus enjoy fiber certification thatâ??s 3x faster and 10 gigabit alien crosstalk certification thatâ??s 4x faster than the competition.

Most Memory Capacity
LanTEK II has 7x the storage capacity as competitive certifiers. Save an astonishing 1700 Category 6 results with graphs. If the memory fills, simply off-load the data to a USB flash drive for portability and archiving.

Cut the Power Cord
The new smart lithium battery technology provides an amazing 18 hours of use in the field. The revolutionary battery technology has two charging modes that offer the best flexibility available. Slow charge the battery overnight while it is inside the LanTEK II, or remove the battery and plug in to its dedicated charging port for a quick five hour charge. Plus, the batteryâ??s internal fuel gauge automatically selfadjusts every time the pack is completely discharged and recharged, providing accurate charge readings over the life of the battery pack.

Three Models to Suit Any Need
LanTEK II is offered in three models: 350, 500 and 1000. The LanTEK II-350 offers 350MHz of frequency sweep to certify Category 6 cabling and below. LanTEK II-500 sweeps to 500MHz, and is the only certifier designed specifically for Category 6A cabling. LanTEK II-1000 is the worldâ??s fastest certifier with a full 1GHz of certification bandwidth to go well beyond Category 7/ISO Class F (600MHz), all the way to ISO Class FA (1000MHz) standard to support shared sheath applications such as CATV, Ethernet and voice in the same cable.

Maximum Reporting Power
The new IDEAL DataCENTER (IDC) software puts the power in the fingertips of the user. The main test grid display can be customized to display and sort by virtually any test parameter allowing for quick identification of tests that are below desired performance margins. Quickly scan through plot data by choosing a plot type and scrolling through the test list to instantly refresh the plot for each test. This makes visually scanning through reports and searching for anomalies a breeze. IDC offers many reporting options such as detailed, brief, and single line reports, plus export data in XML, CSV and PDF formats. Plus the unique ability to customized the plots by inverting the scales, toggling linear or log frequencies and even adjusting colors makes IDC the most user friendly and powerful cable reporting software ever.

Specifications

Handset Dimensions  Height/Width/Depth: 10in. x 5in. x 2.1in. (25.4cm/12.7cm/5.3cm) 
Handset weight w/battery  Display: 2.4lbs/1.1kg; Remote: 2.3lbs/1.0kg 
Battery  Lithium ion, 7.4VDC, 6.6AH; Input: 12V/2A DC; Typical operating time: 18 hours (new battery running a Cat6 test every 2.5 minutes, full backlight); Charge time: 4 hours quick charge with battery removed from handset, 6 hours inside handset. 
Input power  Handset: DC 12-15V, 2A; Line/mains power: AC 110-240V, 50/60Hz 
Display  4.3â?? wide screen TFT, 480 x 272 pixel, 95 x 54mm viewable area 
Connectivity  Adapter port: 168 pin ultra low crosstalk, mini-USB device port, USB host port (display handset only), four pin serial port (service use only), 1/8â?? talkset jack, power/charging jack 
Frequency range  LanTEK II-350: 1-350MHz, LanTEK II-500: 1-500MHz, LanTEK II-1000: 1-1000MHz 
Memory  Non-volatile flash, storage capacity for 1700 TIA-Cat 6 tests with graphs. Tests can be copied to USB flash drive, up to 64GB. 
Measurements  Wire map, DC loop resistance length, capacitance, NEXT, insertion loss (formerly attenuation), ACR-N (formerly ACR), return loss, average impedance, propagation delay, delay skew, power sum NEXT, power sum ACR-N (formerly power sum ACR), ACR-F (formerly ELFEXT), power sum ACR-F (formerly power sum ELFEXT), alien crosstalk (with optional AXT testing kit) 
Length measurement  0-2000 ft.; 1 ft. resolution, +/-(3% + 3 ft.), distance to short/open reported 
Supported cable types  TIA/EIA Category 3, 4, 5, 5E, 6 and 6A: 100. 
ISO/IEC Class C, D, E, EA, F, FA: 100O
Cat 6/6A Class E/EA RJ-45 permanent link adapters: shielded and un-shielded cable, universal adapters provide channel, permanent link and basic link measurements. 
Supported connectors  Additional adapters: GG45, ARJ45, TERA, EC7 (MMCPRO3000), Coax 50-75O (BNC connector), M12 industrial 
Tone generator  Integrated into display and remote handset, compatible with standard analog inductive probes, selectable tone (high/low/warble) 500/600 Hz, selectable pin output. 
Input protection  100V @ 25mA 
Operating temperature  0°C to 50°C, non-condensing 
Storage temperature  -20°C to 70°C, non-condensing 
Vibration/shock  MIL-PRF-28800 F, Class 3 
Supported languages  Chinese, Czech, Danish, Dutch, English, French, German, Italian, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish 
Accuracy  Baseline: Certified by ETL to meet IEC 61935 Level III/IIIe/IV; Channel/Permanent link: TIA 568-B.2-2 and IEC 61935 Level III/IIIe/IV 
PC Software  Requirements: Microsoft Windows® XP or Vista, (32/64 bit) 512MB RAM, 500MB hard disk + 1GB for every 1,500 Category 6 tests 


VSCEL/laser sources have a high dynamic range for certification of links greater than 2kM in length.


Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.


Simplified Testing


Unlike other fiber certification add-ons that require up to four separate testing steps to test each fiber at both wavelengths and in both directions, FiberTEK FDX can accomplish this task in one easy step. FiberTEK FDX revolutionizes the whole fiber certification process by utilizing a sophisticated full duplex optical module that lets each fiber be certified in one simple step with no reversing of patch cords or swapping of optical modules. Four attenuation measurements plus length in one press of the Autotest button. The simplest way to certify fiber.



FiberTEK FDX

 
Compatability  LanTEK® II (any model)
Connector  User changeable adapter (SC, FC, ST), 2.5mm ferrule
Laser safety  Multi-mode 850 VCSEL: class 3, 5mW max; multi-mode 1300 laser: class 3, 5mW max; Single mode 1310 & 1550: class: 3, 5mW max
Power meter accuracy ± .5dB from 0dBm to -40dBm 850-1550nm; system dynamic range 40dB
Length accuracy  Â±3%; maximum distance measurement 3000m
Display resolution Power/attenuation: 0.1dB, length: 0.1m/0.1ft



For full Ideal Lantek II 1000 SM product specifications, please click here: Ideal Lantek II 1000 SM

IDEAL LanTek II 1000 SM Cat5, Cat5e, Cat6 & Cat6a Digital LAN Cable Analyzer

The LanTEK II Is IDEAL's Most Current Test Set
It Is Similar To The Fluke Networks DTX-1800

Test & Certify Cat5, Cat5e, Cat6 & Cat6a Cable Installations up to 1GHz!

Test & Certify 1310 / 1550nm Singlemode Fiber Cabling Installations!

Included Adapters:
(2) IDEAL High Performance Cat6a Adapters P/N: 0012-00-0656 P
(2) IDEAL FiberTEK SM 1310/1550nm Laser Modules P/N: 0012-00-0677

Includes Hard Carrying Case & Accessories As Listed

IDEAL LanTek 2 1000 SingleMode LAN Cable Certifier LanTek-2-1000LAN Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 6275A-L/T* 28222-L/T*

  • IDEAL LanTEK II Cable Certifier Main (BC# 6275A-L/T*)
  • IDEAL LanTEK II Cable Certifier Remote (BC# 28222-L/T*)
  • (2) IDEAL High Performance Cat6A Adapters
  • (2) IDEAL FiberTek FDX SM Laser Modules
  • (2) Interchangeable SC Connectors For Modules
  • (2) Headset / Earbuds
  • (2) Ethernet Cables
  • IDEAL Lantek II Quick Reference Guide
  • (2) SM SC-SC Duplex Fiber Cables
  • Data Center Software
  • (2) AC Adapter/Chargers
  • USB PC Interface Cable
  • (2) Straps For Units
  • Hard Carrying Case w/ Strap
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!