On Sale! IDEAL Lantek 6 MM Fiber Cable Certifier Model Lantek-6 IDEAL Lantek

Lantek 6

Get through your jobs faster than ever today and prepare yourself for the future with LANTEK 6, the industry's most capable CAT 6/ISO E hybrid copper/fiber certifier, testing applications up to 350MHz, well beyond CAT 6/ISO E draft specifications.

The LANTEK 6 performs full Category 6/ISO E Autotest with graphs in approximately 25 seconds.

LANTEK 6 utilizes advanced link adapter method to reduce cost of ownership. LANTEK 6 comes with a pair of Category 6/ISO E channel adapters that fit into the case of the unit and are locked into place. This creates a stable and repeatable testing platform while eliminating bulky adapters. By simply plugging in a Category 6/ISO E reference patch cord to the channel adapter, you can now perform CAT 6/ISO E permanent link testing. Should the plug ever wear out, simply replace the patch cord rather than the entire assembly reducing lifetime ownership cost.

LANTEK 6 comes standard with all the items necessary to certify your job and create certification reports including: Display Unit (with battery); Remote Unit (with battery), LANTEK Reporter Software; Serial and USB Cables; two AC Wall Adapters; two Talksets; two CAT 6 Channel Adapters; two CAT 6 Reference Patch Cords; soft Carry Case; User Manual; Quick Start Guide; and Registration Card.

Features:

Fully compliant with Category 6/ISO E draft standards
Full Category 6/ISO E AutoTest with graphs in approximately 25 seconds
Advanced link adapter method provides more versatrility & reduces cost of ownership
Built in TDR ready for copper and fiber
Display unit comes with 1/4 VGA color screen, remote unit comes with two-line black and white LCD display
Serial and USP ports for uploading tests and upgrading firmware

FEATURES	LANTEK 6
Frequency Range	350 MHz
Support CAT6/5e/3 and ISO-E/D/C	?
Accuracy Level III/IIIe (Draft)/IV verified by	ETL
Support DUALmode Testing to Save Time	?
Test with Patchcords to Save Money	?
Screen Display Area	Best
CAT6 Test Storage with Graphs	500
Expansion Slots	CompactFlash Card
Standard External Compact Flash Memory	Option
USB/Serial Port	?
Copper TDR Trace	?
Fiber Loss Measurement (FIBERTEK)	Option
Fiber Distance to Break (TRACETEK)	Option
Talk over Fiber & Copper (Full Duplex)	?
Display Screen on Remote	?
Troubleshooting Tone Generator on Remote	?
External Rapid Battery Charger & Extra Batteries	Option

Specifications:

Internal memory	No graphs approximately 6,000 tests		With graphs approximately 100 tests
External memory 32MB compact flash	No graphs approximately 24,000 tests		With graphs approximately 400 tests
External memory 256MB compact flash	No graphs approximately 192,000 tests		With graphs approximately 3,200 tests
Standard test compliance	ANSI/TIA/EIA 568B, Category 6 (draft), ISO C/D and ISO E/F (draft), AS/NZS 3080, IEEE 802.3 Ethernet, EN50173, EN50173A1
Cable types	UTP/ScTP/FTP ISO C/D/E/F (Channel, Basic, and Permanent Link) IBM STP Type 1,2,6,Coax
Dimensions	10.1" x 5.0" x 2.3" Display and remote
Weight	2.3 lb. Display	2.0 lb. Remote	1.2 lb Battery
Battery Packs	NiMH rechargeable
Typical operating life (battery)	8 hrs
Max. Operating Temp.	32 to 122°F (0-50°C degrees)
Max Storage Temp.	-4 to 158°F (-20 to +70°C degrees)
Humidity	5-90% noncondensing
Series 6	Range	Resolution	Accuracy
Length (50-100O cable)	0-2000ft	1ft	±(3% + 3ft)
Delay	0-8000 ns	1ns	±(3% + 1ns)
Average Impedance	35-180O	0.1O	±(3% + 1O)
Capacitance (bulk)	0-100 nF	1pF or 3 dig	±(2% + 20 pF)
Capacitance	0-100 pF/ft.	0.1 pF	±(2% + 20 pF)
DC Loop Resistance	0-200O	0.1O	±(1% + 2O)
Noise Floor	<-90 dB
Dynamic Range	>90 dB

Fiber Adapters

The multimode 850nm/1300nm LanTek fiber adapters are the perfect solution for certifying or troubleshooting fiber backbones and fiber to the desktop installations in commercial buildings or campus environments. Working with LANTEK® 6 & 7, it measures signal loss and length over Multimode fiber. With an easy fiber adapter switch, it can support dual wavelength and bidirectional testing.

Using adapters, the LANTEK display unit can measure length in the loop-back mode. Using it in both the display and remote units, the system can measure signal loss and length with dual wavelength and bi-directional capabilities.

Specifications:

Detector Receive Wavelength:	MM: 850 nm, 1300 nm
Measurement Accuracy
Attenuation:	MM 850/1300 nm: 0.25dB
Length:	(+/- 3%) + 1 meter
Display Resolution
Attenuation:	MM 850/1300 nm: 0.1dB
Length:	MM 850/1300 nm: 1.0 meter
Linearity	0.2 dB
Length Range	MM 850 nm: 3,000 meters
Length Range	MM 1300 nm: 6,000 meters
Minimum Length	5 meters
Physical Operating Temperature: Ambient Airflow:	18 to 30°C at Specified Accuracy 0.3 Ms @ 20°C

For full Ideal Lantek 6 MM product specifications, please click here: Ideal Lantek 6 MM

Additional Information

IDEAL LanTek 6 Cat5, Cat5e, Cat6 Digital LAN Cable Analyzer With 850nm & 1300nm Multimode Fiber Adapters

Test, Certify & Print Cat5 /Cat5e & Cat6 Cable Installations up to 350Mhz!

VIEW TEST RESULTS EASILY ON THE LARGE COLOR LCD SCREEN

Includes Carrying Case & Accessories As Listed

IDEAL Lantek 6 Lantek-6 MM Fiber Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 4807A-L/T* 4610B-L/T*

Included