IDEAL LANTEK 6 SM MM Fiber Cat5e Cat6 Certfier
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Lantek 6
Get through your jobs faster than ever today and prepare yourself for the future with LANTEK 6, the industry's most capable CAT 6/ISO E hybrid copper/fiber certifier, testing applications up to 350MHz, well beyond CAT 6/ISO E draft specifications.
The LANTEK 6 performs full Category 6/ISO E Autotest with graphs in approximately 25 seconds.
LANTEK 6 utilizes advanced link adapter method to reduce cost of ownership. LANTEK 6 comes with a pair of Category 6/ISO E channel adapters that fit into the case of the unit and are locked into place. This creates a stable and repeatable testing platform while eliminating bulky adapters. By simply plugging in a Category 6/ISO E reference patch cord to the channel adapter, you can now perform CAT 6/ISO E permanent link testing. Should the plug ever wear out, simply replace the patch cord rather than the entire assembly reducing lifetime ownership cost.
Features:
- Fully compliant with Category 6/ISO E draft standards
- Full Category 6/ISO E AutoTest with graphs in approximately 25 seconds
- Advanced link adapter method provides more versatrility & reduces cost of ownership
- Built in TDR ready for copper and fiber
- Display unit comes with 1/4 VGA color screen, remote unit comes with two-line black and white LCD display
- Serial and USP ports for uploading tests and upgrading firmware
FEATURES |
LANTEK 6 |
Frequency Range | 350 MHz |
Support CAT6/5e/3 and ISO-E/D/C | ? |
Accuracy Level III/IIIe (Draft)/IV verified by | ETL |
Support DUALmode Testing to Save Time | ? |
Test with Patchcords to Save Money | ? |
Screen Display Area | Best |
CAT6 Test Storage with Graphs | 500 |
Expansion Slots | CompactFlash Card |
Standard External Compact Flash Memory | Option |
USB/Serial Port | ? |
Copper TDR Trace | ? |
Fiber Loss Measurement (FIBERTEK) | Option |
Fiber Distance to Break (TRACETEK) | Option |
Talk over Fiber & Copper (Full Duplex) | ? |
Display Screen on Remote | ? |
Troubleshooting Tone Generator on Remote | ? |
External Rapid Battery Charger & Extra Batteries | Option |
Specifications:
Internal memory | No graphs approximately 6,000 tests | With graphs approximately 100 tests | |
External memory 32MB compact flash | No graphs approximately 24,000 tests | With graphs approximately 400 tests | |
External memory 256MB compact flash | No graphs approximately 192,000 tests | With graphs approximately 3,200 tests | |
Standard test compliance | ANSI/TIA/EIA 568B, Category 6 (draft), ISO C/D and ISO E/F (draft), AS/NZS 3080, IEEE 802.3 Ethernet, EN50173, EN50173A1 |
||
Cable types | UTP/ScTP/FTP ISO C/D/E/F (Channel, Basic, and Permanent Link) IBM STP Type 1,2,6,Coax |
||
Dimensions | 10.1" x 5.0" x 2.3" Display and remote | ||
Weight | 2.3 lb. Display | 2.0 lb. Remote | 1.2 lb Battery |
Battery Packs | NiMH rechargeable | ||
Typical operating life (battery) | 8 hrs | ||
Max. Operating Temp. | 32 to 122°F (0-50°C degrees) | ||
Max Storage Temp. | -4 to 158°F (-20 to +70°C degrees) | ||
Humidity | 5-90% noncondensing | ||
Series 6 | Range | Resolution | Accuracy |
Length (50-100O cable) | 0-2000ft | 1ft | ±(3% + 3ft) |
Delay | 0-8000 ns | 1ns | ±(3% + 1ns) |
Average Impedance | 35-180O | 0.1O | ±(3% + 1O) |
Capacitance (bulk) | 0-100 nF | 1pF or 3 dig | ±(2% + 20 pF) |
Capacitance | 0-100 pF/ft. | 0.1 pF | ±(2% + 20 pF) |
DC Loop Resistance | 0-200O | 0.1O | ±(1% + 2O) |
Noise Floor | <-90 dB | ||
Dynamic Range | >90 dB |
Fiber Adapters
Detector Receive Wavelengths: |
MM: 850 and 1300 nm SM: 1310 and 1550 nm |
Measurement Accuracy: | ±0.03 - 0.05 dB @ -20dBm |
Dynamic Range: | MM: -53 dBm SM: -53 dBm |
Fiber Type | 9.0/50/62.5/125 micron |
Detector Type: | INGaAs |
Transmitters Power Output: |
850 (MM): -3 dBm into MM Fiber 1300 (MM): -10 dBm into MM Fiber 1310 (SM): -10 dBm into SM Fiber 1550 (SM): -10 dBm into SM Fiber |
Source Type: | 850 (MM): VCSEL Laser 1300 (MM): Fabry Perot Laser 1310 (SM): Fabry Perot Laser 1550 (SM): Fabry Perot Laser |
Filtering Type | Kalman |
Signal Loss Dynamic Range (MM) Dynamic Range (SM) |
0 to -35 dB at Specified Accuracy 0 to -40 dB at Specified Accuracy |
Propagation Delay Accuracy Resolution Range |
±4% or ±2.0 ns (the greater of) ±1.2 - 1.5 ns 0 â?? 300 ms |
Cable Length Accuracy Resolution Distance Range |
±4% or ±0.3 m (the greater of) ±0.5 m 850 (MM) to 2 km 1300 (MM) to 5 km 1310 (SM) to 10 km 1550 (SM) to 10 km |
Network Specifications | 1000BASESX/LX (Gigabit Ethernet) ATM-155, ATM-622 Legacy Networks 100BASE-F 10BASE-FL, 10BASE-FL/FB, |
For full Ideal Lantek 6 SM MM product specifications, please click here: Ideal Lantek 6 SM MM
IDEAL LanTek 6 Cat5, Cat5e, Cat6 Digital LAN Cable Analyzer With Multimode 850nm/1300nm & Singlemode 1310nm/1550nm Fiber Adapters
Test, Certify & Print Cat5 /Cat5e & Cat6 Cable Installations up to 350Mhz!
VIEW TEST RESULTS EASILY ON THE LARGE COLOR LCD SCREEN
Included Adapters:
(2) IDEAL P/N: 0012-00-0629 Cat6/5e RJ45 Adapters
IDEAL P/N: 0012-00-0336 850 Multimode Fiber Adapter
IDEAL P/N: 0012-00-0337 1300 Multimode Fiber Adapter
IDEAL 0012-00-0338 1310nm Singlemode Adapter
IDEAL 0012-00-0339 1550nm Singlemode Adapter
Includes Hard Carrying Case And Accessories As Listed!
IDEAL Lantek 6 Lantek-6 SM MM Fiber Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- IDEAL Lantek 6 Main
- IDEAL Lantek 6 Remote
- IDEAL Dual Bay Battery Charger
- (2) IDEAL P/N: 0012-00-0629 Cat6/5e RJ45 Adapters
- IDEAL P/N: 0012-00-0336 850 Multimode Fiber Adapter
- IDEAL P/N: 0012-00-0337 1300 Multimode Fiber Adapter
- IDEAL 0012-00-0338 1310nm Singlemode Adapter
- IDEAL 0012-00-0339 1550nm Singlemode Adapter
- Fiber Cables:
- (2) SM FC-FC Duplex
- (2) MM ST-ST Duplex
- (2) Battery Packs
- (3) AC Adapters/Chargers
- (3) Power Cords
- USB PC Interface Cable
- (2) Carrying Straps
- (2) Cat5e Patch Cords
- Compact Flash PC Card Adapter
- 64MB Compact Flash Card
- Headset Talkset
- User Manual On CD-ROM
- Hard Carrying Case