Ideal Lantek 7 kit with accessories

IDEAL LANTEK 7 Cat5e Cat6 Cat6a LAN Cable Certifier

Ideal Lantek 6 kit with accessories

Ideal Lantek 6 Cat5 Cat5e Cat6 Cable Certifier

Ideal Lantek 7 750MHz Cat6a & Multimode Certifier

$4,095.00
Availability: Out of stock
SKU
1W01

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

support a full range of LAN cable testing. The LANTEK family of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making channel and permanent link certification of a cable standard such as CAT6A or ISO-F possible without changing adapters. The same patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the LANTEKs save you money and time on the job.

Features

  • High-performance LANTEK 7 sweeps up to 750 MHz and supports testing requirements up to CAT 6/6a/7/ISO-F and beyond
  • Level IV/IIIe/III accuracy - independently verified by ETL for baseline, channel and permanent link
  • DUALmode testing to save time - reports channel and permanent link test results simultaneously
  • Test with patchcords to save money - performs CAT6/5e/ISO-D/Ea testing with standard patchcords to achieve the lowest cost of ownership
  • Largest internal/external memory capacity - makes record management easy
  • Convenient FIBERTEKâ?¢ accessory - simultaneously tests two fibers for attenuation and length
  • Innovative TRACETEKâ?¢ accessory - performs advanced fiber fault location and troubleshooting functions

FEATURES LANTEK 7
Frequency Range 750 MHz
Supports CAT7 & ISO-F X
Supports CAT6a X
Support CAT6/5e/3 and ISO-E/D/C X
Accuracy Level III/IIIe (Draft)/IV verified by ETL
Support DUALmode Testing to Save Time X
Test with Patchcords to Save Money X
Screen Display Area Best
CAT6 Test Storage with Graphs 500
Expansion Slots CompactFlash Card
Standard External Compact Flash Memory 64MB
USB/Serial Port X
Copper TDR Trace X
Fiber Loss Measurement (FIBERTEK) Option
Fiber Distance to Break (TRACETEK) Option
Talk over Fiber & Copper (Full Duplex) X
Display Screen on Remote X
Troubleshooting Tone Generator on Remote X
External Rapid Battery Charger X

The Only Tester in the World to Support DUALmode Testing to Save Time and Labor

Save time and money by simultaneously conducting any combination of two tests with LANTEK 7. For example, you can select a combination of channel/permanent link or CAT6a/ISO-F standards and get both test results in virtually the same amount of time as a single test. DUALmode can be used as either a troubleshooting tool or to provide an extra level of confidence to your customers by performing certification to additional test standards that demonstrate the quality of your work.

Unique Adapter Scheme Reduces Cost of Ownership

LANTEK® cable testers utilize an advanced link adapter method to reduce cost of ownership. All testers come with universal link adapters that are used for basic, channel, and permanent link testing. These channel adapters fit into the case of the unit and are locked in place. This creates a stable and repeatable testing platform while eliminating bulky adapters that extend beyond the end of the unit. Simply plug in the appropriate reference patchcord to the channel adapter, to perform permanent link testing.

Specifications

LANTEK Range Resolution Accuracy
Length (50-100 O cable) 0 â?? 2000 ft 1 ft ± (3% + 3 ft)
Delay 0 â?? 8000 ns 1 ns ± (3% + 1 ns)
Average Impedance 35 â?? 180 O 0.1 O ± (3% + 1 O)
Capacitance (Bulk) 0 â?? 100 nF 1 pF or 3 dig ± (2% + 20 pF)
Capacitance 0 â?? 100 pF/ft 0.1 pF ± (2% + 1 pF)
DC Loop Resistance 0 â?? 200 O 0.1 O ± (1% + 2 O)
Attenuation 1 MHz â??750 MHz 0.1 dB Level III/IIIe(Draft)/IV
NEXT 1 MHz â??750 MHz 0.1 dB Level III/IIIe(Draft)/IV
Return Loss 1 MHz â??750 MHz 0.1 dB Level III/IIIe(Draft)/IV
ELFEXT 1 MHz â??750 MHz 0.1 dB Level III/IIIe(Draft)/IV
Noise Floor < â??90 dB
Dynamic Range > 90 dB

Multimode Fiber Modules:

The multimode 850nm/1300nm LanTek fiber adapters are the perfect solution for certifying or troubleshooting fiber backbones and fiber to the desktop installations in commercial buildings or campus environments. Working with LANTEK® 6 & 7, it measures signal loss and length over Multimode fiber. With an easy fiber adapter switch, it can support dual wavelength and bidirectional testing.

Using adapters, the LANTEK display unit can measure length in the loop-back mode. Using it in both the display and remote units, the system can measure signal loss and length with dual wavelength and bi-directional capabilities.

Specifications:

Detector Receive Wavelength:  MM: 850 nm, 1300 nm
Measurement Accuracy 
Attenuation:  MM 850/1300 nm:  0.25dB
Length:  (+/- 3%) + 1 meter
Display Resolution 
Attenuation:  MM 850/1300 nm: 0.1dB
Length:  MM 850/1300 nm: 1.0 meter
Linearity  0.2 dB 
Length Range  MM 850 nm: 3,000 meters
MM 1300 nm: 6,000 meters
Minimum Length  5 meters 
Physical Operating Temperature: Ambient Airflow:  18 to 30°C at Specified Accuracy 0.3 Ms @ 20°C 



For full Ideal lantek 7 MM product specifications, please click here: Ideal Lantek 7 MM

IDEAL LanTek 7 Cat5, Cat5e, Cat6, Cat6a Digital LAN Cable Analyzer With 850nm & 1300nm Multimode Fiber Adapters

Test, Certify & Print Cat5/Cat5e & Cat6/Cat6a Cable Installations up to 750Mhz!

Included Adapters:
(2) IDEAL Cat6A Adapters P/N: 0012-00-0656A
(2) IDEAL Cat6/5e Adapters P/N: 0012-00-0629
IDEAL 850 mm Adapter P/N: 0012-00-0336
IDEAL 1300 mm Adapter P/N: 0012-00-0337

Includes Hard Carrying Case & Accessories As Listed

IDEAL Lantek 7 Lantek-7 MM Fiber Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 5395A-L/T* 5395B-L/T*

 

  • IDEAL Lantek 7 Main (BC# 5395A-L/T*)
  • IDEAL Lantek 7 Remote (BC# 5395B-L/T*)
  • (2) IDEAL Cat6A Adapters P/N: 0012-00-0656A
  • (2) IDEAL Cat6/5e Adapters P/N: 0012-00-0629
  • IDEAL 850 mm Adapter P/N: 0012-00-0336
  • IDEAL 1300 mm Adapter P/N: 0012-00-0337
  • (2) Cat6 High Performance Cables
  • (2) IDEAL Headset Talksets w/ Case
  • IDEAL Dual Bay Battery Charger w/ AC Adapter & Power Cord
  • (2) MM ST-ST Fiber Cables
  • IDEAL Data Center Software
  • 2GB Flash Card
  • Transcend Compact Flash Adapter
  • Digital Compact Flash Reader/Writer
  • (2) Battery Packs
  • (2) AC Adapter/Chargers
  • (2) Power Cords
  • RS232 PC Interface Cable
  • USB PC Interface Cable
  • Hard Copy User Manual
  • Hard Carrying Case