INNO IFS-10 Fusion Splicer & CMA4000 SM OTDR

Inno Fiber Master IFS-10 Core-Alignment Fusion Splicer with the New (DACAS) Digital Analysis Core Alignment System is one of the most dependable splicers on the market. Once technicians put their hands on this unit in the field it becomes the unit of choice. The Fiber Master splicer features a rubberized design for field use in harsh weather conditions. The IFS-10 has a friendly, intuitive GUI (Graphical user Interface) with a 5 inch color LCD screen that is easy to see and is adjustable for front and rear splicer orientation. The sizeable, large battery capacity at full charge allows for up to 350 splices! Amazingly, the IFS-10 splicer is the most reliable and user friendly Core Alignment splicer in the world.

VF-78 High Precision Cleaver is an instrument for high precision fiber cutting. It is compact and light, making it ideal for both single and 250um adaptable ribbon fiber cleaving (2-12 core). The blade provides over 48,000 cleaves by easy and simple blade position selection. Additionally, it has an automatic collector for fiber shards and off cuts.

The fastest, smartest, and easiest OTDR in the world!

When it comes to fiber optic testing, time is money. That's why we designed the CMA4000. It offers all the features of a mainframe OTDR in a rugged, economical, field-portable unit and its unique features make it better than other OTDRs. Intelligent software minimizes necessary steps to perform frequent functions, its multi-tasking ability allows the CMA4000 to test, analyze and display data faster than any other OTDR available. Plus, it has incredible deadzone, dynamic range performance, tri and quad-wavelength optics and is fully configurable. In other words, it's the only piece of equipment you'll ever need for all your basic fiber optic testing -- whether for installation, maintenance or fault location.

Incredible dynamic range and short deadzones
The CMA4000 offers a test range of 21 to 46dB, the highest dynamic range in the world. That means you can test longer lengths of fiber with greater resolution and less averaging time. Plus, with deadzones as short as 2.5 m, you can be sure you�re getting complete and accurate data for your entire length of cable.

The CMA4000 makes your job faster and easier with dozens of unique features:

One button to test and save
Automatic evaluation of the test fiber for connection quality and traffic
Multi-tasking software simultaneously test and analyzes trace data to display results in seconds
An panel of dedicated keys for easy access to functions you use most as well as a convenient onboard keyboard for entering file names
Automated software prompts the user for the required information about the cable under test and keeps track of the fibers as they are tested

The best value for your money
The CMA4000 is the one piece of equipment that can meet virtually all your basic fiber optic testing needs. If you choose to incorporate a standard power meter, optical return loss test set, light source and visual fault locator, it�s the only piece of equipment you�ll ever need. You can customize your unit with optional languages, power cords, connectors, keyboard layouts, and date and time formats. The built-in keyboard let you enter important text data, and the large 8.4� display with optional VGA color and flexible configuration, makes the screen easy to read under any testing condition. Plus, the environmentally sealed modules and buttons - along with the rugged case - protect the CMA4000 from dust, rain and impact.

Easy documentation makes it simpler for you
The programmable autosave lets you save test results on the harddrive or floppy in a format that makes sense for your network. These virtually eliminate typing mistakes while saving time in the field. When used in conjunction with our GN NetWorks Software, the CMA4000 can perform a variety of trace manipulations, such as trace overlay, graphing, batch printing and bi-directional averaging reports.

Form Factor	Module (proprietary interface/bus)
Fiber Type	Singlemode
Minimum Wavelength	1310 nm
Maximum Wavelength	1550 nm
Maximum Distance Range	256 km
Minimum Distance Resolution	0.1 m
Maximum Distance Resolution	0.16 m
Maximum Dynamic Range	28 dB
Dead zone distance	3 m
Minimum Pulse Width	10 ns
Maximum Pulse Width	10 us
Connector type (main signal)	FC/SPC

Troubleshooting Made Easy
Designed to detect problems related to poor transmission performance, the Fiber-Optic Microscope (FOMS) provides high-quality images of connector ferrule endfaces. This sturdy, user-friendly instrument enables you to examine connector ferrule endfaces for imperfections, scratches, dirt or any other problems that may impede transmission. Applications for the FOMS include fiber installation, maintenance and system qualification. This versatile instrument is available in magnifications of either 200x or 400x and is ideal for both field and lab use.

Sturdy and Reliable
The FOMS has a lightweight, sturdy cast-aluminum casing with a rubber exterior for optimal reliability and safety under all working conditions. Purchase this unit as a stand-alone solution, or integrate it with other EXFO instruments.

A Wide Range of Connector Options
As well as providing a high-quality troubleshooting instrument, EXFO now also offers a complete line of connectors. Designed to save you valuable time, these connectors will satisfy all of your fiber inspection needs.

Professional-Grade Coaxial Illumination System
The FOMS uses coaxial illumination to produce the maximum amount of light at greater magnification levels. To view the polish quality they have produced, fiber specialists prefer coaxial illumination, the same illumination that is found in professional-grade microscopes.

Specifications:
Size (H x W x D): 22.5 cm x 5.1 cm x 3.2 cm (8 7/8 in x 2 in x 1 1/4 in)
Weight (with batteries): 0.58 kg (1.3 lb)
Power: Three AAA batteries
Battery life: 30 hours

3K91 - INNO IFS-10 Fusion Splicer & CMA4000 SM OTDR