INNO Mini 2 SM Fiber OTDR & View 12R SM MM Fusion Splicer
Condition: Brand NEW / Calibrated
Warranty: 3 YEAR WARRANTY
The MINI2 OTDR is used in the installation and maintenance of fiber optic cables. Features of the MINI2 OTDR include high precision test capabilities, fast response times, and easy to learn operation. The multi-point capacitive touch screen allows for user-friendly operation. The MINI2 OTDR offers accurate and fast test results and creates a report automatically. The MINI2 OTDR is compactly designed and very lightweight and hand-held.
Features:
- SOLA (Smart Optical Link Analyzer)
- 5” Touch Screen with Smart GUI
- 8GB Internal Storage with Internal SD Card & External USB Memory
- Built-In VFL and Light Source
- Fast Booting Time
- Lightweight and Handheld
OTDR
OTDR mode allows for measuring distance, loss, reflectivity, attenuation and accumulation loss on a fiber optical link.
VFL
VFL allows for finding direct fault locations in fiber test dead zones or performing fiber core calibration in multi-fiber cables.
FILE MANAGER
File Manger can provide powerful file management that users can manage their files conveniently.
SOLA
SOLA is an application for the OTDR, designed to simplify OTDR test process without the need to configure the parameters or analysis while parsing multiple complex OTDR curves.
FIBER MICROSCOPE
Fiber end tester (peripheral required) is mainly used to test the cleanliness and flatness of the fiber end face.
LIGHT SOURCE
Invisible light source (1310 or 1550ns) can provide the following types of light, including CW light, 1kHz light, 2kHz light, 1kHz blink light, 2kHz blink light.
Specifications:
Display | 5 inches, High Brightness TFT LCD, resolution of 800×480 |
Distance unit | m / km / mile / ft |
Dynamic range | 32dB / 30dB (1310nm / 1550nm) |
Measurement range (km) | 1.3, 2.5, 5, 10, 20, 40, 80, 120, 160, 360km |
Measurement range (mile) | 0.81, 1.55, 3.11, 6.22, 12.4, 24.8, 49.6, 74.6, 99.4, 223.7mile |
Pulse width | 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 10μs, 20μs |
Event dead zone | 1m |
Attenuation dead zone | 5m |
PON dead zone | 50m |
Distance accuracy | ±(1m+Distance×2.5×10-5 +Sampling resolution) |
Loss scale linearity | ±0.1dB or ±0.05dB / dB |
Sampling points | 110,000 points |
Splitting ratio | Up to 1:32 splitter |
Resolution | 0.04m ~ 10.24m |
Battery capacity | Operating Time : Up to 12hours |
File format | SOR(Telcordia), BMP, JPG |
External connection | USB 2.0 |
Compatible connector | APC(FC, SC, LC), UPC(FC, SC, LC, ST) |
Power supply | AC Input 100-240V, 50-60Hz / DC Input 19V, 3.42A |
VFL Distance | Up to 15km |
VFL Module | Operating wavelength: 650nm ±10nm, Universal interface: 2.5mm |
VFL Output power | 20mW |
Light source | Operating wavelength: 1310nm / 1550nm ±10nm |
Light source output power | -5dBm |
GENERAL SPECIFICATIONS | |
Dimension | 4.52H x 6.81W x 2.51D inches (115H x 173W x 64D mm, excluding rubber bumper) |
Weight | 1.98pounds (0.90kg with battery) |
Operating conditions | -10~50? |
Storage conditions | -20~60?, |
Relative humidity | 0~95% (Noncondensing) |
For full Inno Mini 2 product specifications, please click here: Inno Mini 2
Inno View 12R Ribbon Fusion Splicer:
The Inno View 12R, a ribbon splicer with the fully motorized clamp alignment system, is the most powerful and state-of-the-art ribbon splicer in the market. Its advanced automatic clamp alignment system offers an accurate and dependable ribbon fiber splicing up to 12 fibers with double - tapping (Zoom in & out) to the worldâ??s highest magnifi cation of 250x for ribbon splicer. The View 12R provides maximum work efficiency through the fast splicing & heating time, ultra-high battery capacity of 220 splice / heat cycles, and universal holder both for 250?m & 900?m single fiber.
Features:
- Fast Heating up to 20s (max 14s during consecutive heating)
- 3 Bright LEDs for Dark Environment
- Motorized Clamp for Imporved Accuracy
- 5" Touch Screen with Smart GUI
- The Highest 250X magnification for ribbon splicer
- Double Tap to Zoom in & out
- Protected by Tempered Glass Film
- Highest Battery Capacity for ribbon splicer with typical 220 cycles
- Replaceable Fiber Holders from Single to 12 Fibers
MOTORIZED CLAMP ALIGNMENT SYSTEM
View 12Râ??s advanced clamp activates itself in accordance with the position of fiber so that each core of individual fiber is correctly placed on its assigned v-groove. There is no doubt that this process allows an accurate and reliable splicing process.
Specifications:
Model | View 12R |
Dimension | 160H x133W x155D mm (excluding rubber bumper)/ 167H x143W x163D mm (including rubber bumper) |
Weight | 1.98 KG (without battery)/ 2.64 KG (with battery) |
Number of Fiber | 1, 2, 4, 6, 8, 10, 12 |
Applicable Fibers | SM (ITU-T G.652 & G.657)/ MM (ITU-T G.651)/ DS (ITU-T G.653)/ NZDS (ITU-T G.655) |
Compatible Fiber / Cable | Ribbon : 0.25~0.4 mm/ Single: 250 ?m & 900 ?m |
Cleaved Length | 10 ~13 mm |
Cladding Diameter | 125 ?m |
Splicing Mode | Max 100 modes |
Heating Mode | Max 32 modes |
Typical Splice Loss | SM: 0.05dB/ MM: 0.02dB/ DS: 0.08dB/ NZDS: 0.08dB (ITU-T standard) |
Return Loss | >> 60 dB |
Lighting | 3 White LEDs |
Splicing Time | Ribbon fiber : 15 sec/ Single fiber : 9 sec |
Estimated Splice Loss | Available |
Heating Sleeve Length | 60mm, 50mm, 40mm, Micro |
Heating Time | Typical 20 sec |
Results Storage | Last 2000 results |
Tention Test | 1.96~2.25N |
Operating Condition | Operating Altitude: 0~3,660m above sea level / 0~95% relative humidity/ -10~50?/ Max Wind 15m/s |
Storage Condition | 0~95% relative humidity/ - 40~80? |
Display | 90° bi - directional view, 5.0â?? Color High Resolution Display |
Fiber View & Magnification | X, Y, XY, X/Y : 250X Magnifi cation |
Power Supply | AC Input 100-240V, DC Input 9-14V |
No. of Splice & Heating with Battery | 8700mAh Battery Capacity / Typical 220 times (Splice + Heat) |
Operating Methods | Button / Touch Screen |
Automatic Calibration | Automatic arc calibration by air pressure and temperature |
Electrode Life | 1500 arcs, can be extended by using an electrode grinder |
Terminal | DIN / Micro HDMI |
For full Inno View 12R product specifications, please click here: Inno View 12R
INNO Mini 2 SingleMode 1310 / 1550nm Fiber OTDR w/ SOLA Application Software, VFL & Source
&
INNO View 12R SM MM Ribbon Fiber Fusion Splicer
Choose between APC or UPC Connector Polish Style
This Kit Is Brand New & Comes With A 3-Year Warranty!
Fusion Splicer & OTDR Promotional Combo Kit!
Dynamic Range:
1310 / 1550 nm : 32 / 30 dB
SM Source:
- 1310nm
- 1550nm
Visual Fault Locator
View 12R Average Splice Loss:
- SM: 0.05dB
- MM: 0.02dB
- DS: 0.08dB
- NZ: 0.08dB
Fiber holder sets for 4 Ribbon, 8 Ribbon, 12 Ribbon, and 250/900µm Single fiber included with this kit
Includes Hard Carrying Cases & Accessories As Listed
Mini2 Mini-2 View12R View-12R
Inno Mini 2 View 12R Mini2 View12R OTDR & Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 31720 17302M
- INNO Mini 2 SM Fiber OTDR (BC# 31720)
- SOLA Application Software
- SM OTDR Source:
- 1310nm
- 1550nm
- Light Source:
- 1310nm
- 1550nm
- SC Connector For Source
- LC Connector For Source
- FC Connector For Source
- Visual Fault Locator
- 2.5mm Connector For VFL
- Accessory Case
- Stylus
- AC Adapter/Charger
- Power Cord
- User Manual On CD-ROM
- Case For Unit w/ Strap
- Wrist Strap For Unit
- Hard Carrying Case
- INNO View 12R Fusion Splicer (BC# 29840)
- INNO V7 High Precision Fiber Cleaver w/ Case (BC# 17062M)
- INNO TS Plus Thermal Stripper w/ DC Cord (BC# 17063M)
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- Clauss CFS-2 Fiber Optic Stripper
- Cooling Tray
- DC Car Charger
- Electrode Grinder
- (2) Spare Electrodes
- (10) Pack Protection Sleeves
- V-Groove Brush
- (2) FH-12 Fiber Holders
- (2) FH-02 Fiber Holders
- (2) FH-06 Fiber Holders
- (2) FH-10 Fiber Holders
- (2) FH-04 Fiber Holders
- (2) FH-08 Fiber Holders
- (2) FH-250 Fiber Holders
- (2) FH-900 Fiber Holders
- Inno LBT-20 Battery Pack
- (2) AC Adapter/Chargers
- Power Cord
- USB PC Interface Cable
- User Manual On Cd-ROM
- Hard Copy User Manual
- Hard Carrying Case