INNO Mini 2 SM Fiber OTDR & View 12R SM MM Fusion Splicer

INNO Mini 2 SM Fiber OTDR & View 12R SM MM Fusion Splicer

JDSU Viavi DSAM-2300 xt Digital Meter DSAM2300xt

JDSU Viavi DSAM-2300 xt Digital Meter DSAM2300xt

INNO View 500 SM Fiber OTDR & View 12R SM MM Fusion Splicer

$17,240.00
Availability: Out of stock
SKU
INN29

Condition: Brand NEW / Calibrated

Warranty: 3 YEAR WARRANTY

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

Inno Instruments View 500 SM Fiber Optic OTDR
The VIEW500 OTDR is used in the installation and maintenance of fiber optic cables. Features of the VIEW500 OTDR include high precision test capabilities, fast response times, and easy to learn operation. The multi-point capacitive touch screen allows for user-friendly operation. The VIEW500 offers accurate and fast test results and creates a report automatically. The VIEW500 is equipped with an industrial grade CPU for creating and storing test results.

Features:

  • SOLA (Smart Optical Link Analyzer
  • 7” Touch Screen with Smart GUI
  • 8GB Internal Storage with Internal SD Card & External USB Memory
  • Built-In VFL, Light Source and OPM
  • Fast Booting Time
  • Ultra-High Capacity Battery

OTDR
OTDR mode allows for measuring distance, loss, reflectivity, attenuation and accumulation loss on a fiber optical link.

VFL
VFL allows for finding direct fault locations in fiber test dead zones or performing fiber core calibration in multi-fiber cables.

OPM
OPM is used for measuring the absolute optical power meter or relative optical power loss through the span of the optical fiber.

SOLA
SOLA is an application for the OTDR, designed to simplify OTDR test process without the need to configure the parameters or analysis while parsing multiple complex OTDR curves.

FIBER MICROSCOPE
Fiber end tester (peripheral required) is mainly used to test the cleanliness and flatness of the fiber end face.

LIGHT SOURCE
Invisible light source (1310 or 1550ns) can provide the following types of light, including CW light, 1kHz light, 2kHz light, 1kHz blink light, 2kHz blink light.

ULTRA-HIGH CAPACITY BATTERY
VIEW500 offers the ultra-high battery capacity of 7800mAh.

Specifications:

Display 7 inches, High Brightness TFT LCD, resolution of 800×480
Distance unit m / km / mile / ft
Dynamic range 35dB / 33dB (1310nm / 1550nm)
Measurement range (km) 1.3, 2.5, 5, 10, 20, 40, 80, 120, 160, 360km
Measurement range (mile) 0.81, 1.55, 3.11, 6.22, 12.4, 24.8, 49.6, 74.6, 99.4, 223.7 mile
Pulse width 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 10μs, 20μs
Event dead zone 0.8m
Attenuation dead zone 4m
PON dead zone 40m
Distance accuracy ±(1m+Distance×2.5×10-5 +Sampling resolution)
Loss scale linearity ±0.1dB or ±0.05dB / dB
Sampling points 160,000 points
Splitting ratio Up to 1:64 splitter
Resolution 0.04m ~ 10.24m
Battery capacity Operating Time : Up to 12hours
File format SOR(Telcordia), BMP, JPG
External connection USB 2.0
Compatible connector APC(FC, SC, LC), UPC(FC, SC, LC, ST)
Power supply AC Input 100-240V, 50-60Hz / DC Input 19V, 3.42A
VFL Distance Up to 15km
VFL Module Operating wavelength: 650nm ±10nm, Universal interface: 2.5mm
VFL Output power 20mW
Light source Operating wavelength: 1310nm / 1550 nm ±10nm
Light source output power -5dBm
Optical power meter Wavelength calibration: 850 / 1300 / 1310 / 1490 / 1550 / 1625 / 1650nm
Power range (OPM) -70 to +6dBm
Accuracy (OPM) 0.01dB
Unit display for OPM dB, dBm, uW
PACKAGE
OTDR VIEW500
Power cable / AC Adapter ACC-25 / JS-180300
GENERAL SPECIFICATIONS
Dimension 7.08H x 10.70W x 2.44D inches (180H x 272W x 62D mm, excluding rubber bumper
Weight 4.19pounds (1.90kg with battery)
Operating conditions -10~50?
Storage conditions -20~60?,
Relative humidity 0~95% (Noncondensing)





For full Inno View 500 product specifications, please click here: Inno View 500

 


 

 

Inno View 12R Ribbon Fusion Splicer:

The Inno View 12R, a ribbon splicer with the fully motorized clamp alignment system, is the most powerful and state-of-the-art ribbon splicer in the market. Its advanced automatic clamp alignment system offers an accurate and dependable ribbon fiber splicing up to 12 fibers with double - tapping (Zoom in & out) to the worldâ??s highest magnifi cation of 250x for ribbon splicer. The View 12R provides maximum work efficiency through the fast splicing & heating time, ultra-high battery capacity of 220 splice / heat cycles, and universal holder both for 250?m & 900?m single fiber.


Features:

  • Fast Heating up to 20s (max 14s during consecutive heating)
  • 3 Bright LEDs for Dark Environment
  • Motorized Clamp for Imporved Accuracy
  • 5" Touch Screen with Smart GUI
  • The Highest 250X magnification for ribbon splicer
  • Double Tap to Zoom in & out
  • Protected by Tempered Glass Film
  • Highest Battery Capacity for ribbon splicer with typical 220 cycles
  • Replaceable Fiber Holders from Single to 12 Fibers



MOTORIZED CLAMP ALIGNMENT SYSTEM
View 12Râ??s advanced clamp activates itself in accordance with the position of fiber so that each core of individual fiber is correctly placed on its assigned v-groove. There is no doubt that this process allows an accurate and reliable splicing process.

 

INNO View 12R Fusion Splicer




Specifications:

Model View 12R
Dimension 160H x133W x155D mm (excluding rubber bumper)/
167H x143W x163D mm (including rubber bumper)
Weight 1.98 KG (without battery)/ 2.64 KG (with battery)
Number of Fiber 1, 2, 4, 6, 8, 10, 12
Applicable Fibers SM (ITU-T G.652 & G.657)/
MM (ITU-T G.651)/
DS (ITU-T G.653)/
NZDS (ITU-T G.655)
Compatible Fiber / Cable Ribbon : 0.25~0.4 mm/ Single: 250 ?m & 900 ?m
Cleaved Length 10 ~13 mm
Cladding Diameter 125 ?m
Splicing Mode Max 100 modes
Heating Mode Max 32 modes
Typical Splice Loss SM: 0.05dB/ MM: 0.02dB/ DS: 0.08dB/ NZDS: 0.08dB (ITU-T standard)
Return Loss >> 60 dB
Lighting 3 White LEDs
Splicing Time Ribbon fiber : 15 sec/ Single fiber : 9 sec
Estimated Splice Loss Available
Heating Sleeve Length 60mm, 50mm, 40mm, Micro
Heating Time Typical 20 sec
Results Storage Last 2000 results
Tention Test 1.96~2.25N
Operating Condition Operating Altitude: 0~3,660m above sea level / 0~95% relative humidity/ -10~50?/ Max Wind 15m/s
Storage Condition 0~95% relative humidity/ - 40~80?
Display 90° bi - directional view, 5.0â?? Color High Resolution Display
Fiber View & Magnification X, Y, XY, X/Y : 250X Magnifi cation
Power Supply AC Input 100-240V, DC Input 9-14V
No. of Splice & Heating with Battery 8700mAh Battery Capacity / Typical 220 times (Splice + Heat)
Operating Methods Button / Touch Screen
Automatic Calibration Automatic arc calibration by air pressure and temperature
Electrode Life 1500 arcs, can be extended by using an electrode grinder
Terminal DIN / Micro HDMI





For full Inno View 12R product specifications, please click here: Inno View 12R

INNO View 500 SingleMode 1310 / 1550nm Fiber OTDR w/ Power Meter, VFL & Light Source
&
INNO View 12R SM MM Ribbon Fiber Fusion Splicer

Choose between APC or UPC Connector Polish Style

INNO View 12R Fusion Splicer

INNO V7 Fiber Cleaver

INNO View 500 OTDR

Spec Sheet 

Spec Sheet 

Spec Sheet


This Is A Brand New Kit With A 3 Year Warranty

Fusion Splicer & OTDR Promotional Combo Kit!

Dynamic Range:
1310 / 1550 nm : 35 / 33 dB

Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm

SM Source:
- 1310nm
- 1550nm

Visual Fault Locator

Fiber holder sets for 4 Ribbon, 8 Ribbon, 12 Ribbon, and 250/900µm Single fiber included with this kit

View 12R Average Splice Loss:
- SM: 0.05dB
- MM: 0.02dB
- DS: 0.08dB
- NZ: 0.08dB

Includes Hard Carrying Cases & Accessories As Listed

VIew12R View-12R View-500 View500

Inno View 500 View 12R View500 View12R OTDR & Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 29840 17062M 17063M

  • Inno View 500 SM Fiber OTDR (BC# 33691)
    • SM OTDR Source:
      • 1310nm
      • 1550nm
    • Light Source:
      • 1310nm
      • 1550nm
    • SC Connector For Source
    • FC Connector For Source
    • Power Meter:
      • 850nm
      • 1300nm
      • 1310nm
      • 1490nm
      • 1550nm
      • 1625nm
      • 1650nm.
    • FC Connector For Power meter
    • Visual Fault Locator
  • Inno ACC-25 Power Cable
  • Inno JS-180300 AC Adapter
  • Stylus
  • (4) Fiber Wipes
  • Case For Unit
  • Hard Carrying Case w/ Strap


  • INNO View 12R Fusion Splicer (BC# 29840)
  • INNO V7 High Precision Fiber Cleaver w/ Case (BC# 17062M)
  • INNO TS Plus Thermal Stripper w/ DC Cord (BC# 17063M)
  • 6 Month Fusion Splicer Care Kit FS6MC:
    • 4oz Flip Jar Of 99% Alcohol
    • (50) Non-Lint Dry Wipes
    • (6) Fiber Optic Wipes w/ 99% Alcohol
    • 2oz Pump Fast Evaporating Mirror Spray
    • (25) Camera Swabs
    • (25) V-Groove Swabs
  • Clauss CFS-2 Fiber Optic Stripper
  • Cooling Tray
  • DC Car Charger
  • Electrode Grinder
  • (2) Spare Electrodes
  • (10) Pack Protection Sleeves
  • V-Groove Brush
  • (2) FH-12 Fiber Holders
  • (2) FH-02 Fiber Holders
  • (2) FH-06 Fiber Holders
  • (2) FH-10 Fiber Holders
  • (2) FH-04 Fiber Holders
  • (2) FH-08 Fiber Holders
  • (2) FH-250 Fiber Holders
  • (2) FH-900 Fiber Holders
  • Inno LBT-20 Battery Pack
  • (2) AC Adapter/Chargers
  • Power Cord
  • USB PC Interface Cable
  • User Manual On Cd-ROM
  • Hard Copy User Manual
  • Hard Carrying Case