JDSU HD2-P2 SM Fiber Test Inspection Cleaning Kit
Condition: Refurbished
Warranty: 90 Day Exchange
FBP-HD2 Handheld video display with 3.5-in TFT LCD
Features
- High-resolution 3.5-inch TFT LCD display that can detect 1 µm particles and scratches
- Ruggedized, durable enclosure for use in any environment
- GripSwitchル mode activates the display when held in-hand and deactivates it when released, extending battery life
- ~8-hour run time using continuous-ON mode and extended run time in GripSwitch mode
- Low-battery warning LED
- Uses eight AA batteries or AC adapter (100ヨ240 VAC/12 VDC) as alternate power supply
- Available hardwired to FBP or FBE probe or connectorized to FBP probe
HD2 Handheld Display
The HD2 display combines performance and versatility in a durable device that fits comfortably in the userメs hand. Used for field inspection of optical fiber, the HD2 incorporates a variety of features that enable portability and efficiency. All models include a 3.5-inch thin film transistor (TFT) liquid crystal display (LCD) and an innovative GripSwitch that conserves battery life with instant-ON functionality when holding the unit in-hand, and powers OFF when set down. It is equipped with a continuous-ON feature for hands-free operation. With its durable design and rugged enclosure, the HD2 ensures excellent performance during field applications.
Additional features available in certain models include an integrated patch cord microscope (PCM) to inspect male connectors.
Applications
- View clear detailed fiber end face images on 3.5-in video display
- Use with JDSU probe microscope to inspect both bulkhead (female) and patch cord (male) sides of fiber interconnect
- Promote proper fiber handling workflow and practice
HD2 Display Specifications
Dimensions | FBP-HD2 18.5 x 15.0 x 6.0 cm (7.3 x 5.9 x 2.4 in) |
Weight (with 8 x AA batteries) |
FBP-HD2: 760 g (26.8 oz) |
Video display | 3.5-in (88.9 mm) TFT LCD |
Connector | 4-pin Hiroseル for FBP probes; hardwired to FBP or FBE probes |
Power source | 8 x AA standard alkaline batteries or AC adapter (100ヨ240VAC/12VDC) |
Power modes | ON (continuous on) GripSwitch (power saving mode) OFF |
Run time | ~8 hours (continuous on) Extended run time with use of GripSwitch (power saving mode) |
JDSU Westover P5000 Fiber Optic Microscope
FiberChek2 is an advanced application that determines the acceptability of optical fiber end faces through automated inspection and analysis. It identifies and characterizes defects and contamination and determines their location relative to the fiber core. It then provides a PASS or FAIL result according to a pre-configured failure criteria setting.
The P5000 digital probe microscope connects directly to a PC or laptop via a USB 2.0 connection, and the unique QuickCaptureTM button lets users capture, inspects, and analyzes a fiber end face image in a single automated step.
As different types of contamination are located and identified, FiberChek2 measures the size of each feature, determines its location relative to the core, and analyzes the collected data using an advanced logarithm to obtain a PASS or FAIL result based on parameters configured for each pre-defined setting.
Because defects and contamination on or near the core surface typically affect the light transmission most significantly, they require the most aggressive examination. FiberChek2 defines the concentric areas around the core as Zones which let users establish failure criteria by evaluating various defect categories, which include Contamination, Pit/Chip and Scratches.
Features:
- FiberChek2 software pre-programmed to comply with International Electrotechnical Commission (IEC) acceptance criteria standards for single-mode and multimode connectors
- Implements standards for inspection and grading throughout every stage of fiber handling
- Remove human subjectivity from fiber inspection and grading to ensure consistent results
- Configurability allows for user-defined controls and criteria settings
- Identify and characterize each defect and contamination particle, and determines their location relative to the fiber core
- Archive results and images as HTML or PDF files and generate integrated reports
- Plug it directly into PC/laptop via USB 2.0 connection
- Produce crisp, clear view of fiber end face condition with high-resolution 5MP camera and coaxial illumination
Specifications:
Dimensions |
140 x 46 x 44 mm (5.5 x 1.8 x 1.7 in) |
Weight |
110 g (3.88 oz) |
LOW-Mag field-of-view (FOV) |
Horizontal: 740 µm Vertical: 550 µm Diagonal: 920 µm |
HIGH-Mag FOV |
Horizontal: 460 µm Vertical: 345 µm Diagonal: 575 µm |
Live image |
800 x 600; 15 fps |
Connector |
USB 2.0 (with latch lock) |
Cord length |
183 cm (6 ft) |
Camera sensor |
1280 x 1024 black and white, 1/3-in (1.27 cm) CMOS |
Particle size detection |
<1 µm |
Light source |
Blue LED, 100,000+ hour life |
Lighting technique |
Coaxial |
Power source |
USB port |
Certification |
CE |
JDSU OLS-35 Smartpocked Fiber Optic Light Source
The JDSU OLS-3x series is the new generation of small and rugged optical light sources for quick, easy and convenient field insertion loss measurement and continuity check.
All JDSU sources are equipped with Auto- ? and Multi- ? functions compatible with any JDSU power meters. This one button operation provides a quick, simple and error-free testing solution, which makes SmartPocketル sources the ideal tool for daily field testing.
The optical light sources (OLS-3x) of the SmartPocketル series provide the ideal complement tools to the OLP-3x for insertion loss and continuity testing in both multimode and singlemode optical fiber networks. They offer a dedicated and costoptimized solution for testing and troubleshooting optical fibers in the field.
- The OLS-35 covers all standard singlemode telecommunication network applications with 1310/1550 nm
Features:
- Cost-effective, rugged and compact solution
- Interchangeable connectors for maximum flexibility available
- Auto ? and TwinTest transmission modes
Applications:
- Link insertion loss measurements and continuity check
- Standard singlemode wavelengths for any telecom, CATV and military applications.
Specifications:
Source Type | Laser |
Laser Safety | IEC 60825-1: 2007 |
Fiber Type | SM (9/125 µm) |
Optical Interface Type | PC/ 1 single port for all wavelengths |
Optical Interface Connectors | Fixed: LC, FC, SC Interchangeable LC, FC, SC, ST, DIN |
Central Wavelength | 1310 nm (± 20 nm) 1550 nm (± 20 nm) |
Spectral Width *1* | <5 nm |
Output Power | -7 dBm |
Stability Short Term (15 Min) *3* | ± 0.02 dB |
Stability Long Term (8h) *3* | ± 0.05 dB |
Tone Generation | 270 Hz, 1 kHz, 2 kHz |
Auto ? mode *4* | Yes |
Multi ? mode *4* | Yes (2 ?s) |
*2.* Into a 50/125 µm fiber
*3.* After 20 minutes warm-up time, at ambient tempeature range -10°C to +55°C, ?T = ± 0.3 K
*4.* With JDSU Power meters
Power supply | |
Dry batteries | 2x Mignon (AA) 1.5 V |
Rechargeable batteries | 2x Mignon (AA) NiMH 1.2 V |
AC operation | via micro USB and SNT-505 |
Battery life (CW) | 30 h (MM)/80 h (SM) Automatic power off after 20 minutes |
Environmental conditions | |
EMI/ESD | CE compliance |
Electrical safety | EN 61010-1: 2002 |
Recommended calibration interval | 3 years |
Operating temperature | -10 to +60°C / +14 to +140°F |
Storage temperature | -40 to +70°C/ -40 to +158 °F |
Dimensions (H x W x D) | 30 x 80 x 150 mm / 1.2 x 3.1 x 5.9ヤ |
Weight | 200 g / 0.45 lb |
JDSU FFL-050 Visaul Fault Locator
Whether installing or troubleshooting, the Visual Fault Locator (VFL) is an essential tool that quickly and easily locates problem areas in fiber cables. By pinpointing the exact location of fiber damage, technicians can diagnose, troubleshoot, and fix the problem efficiently. The VFL is also used for conducting continuity tests and performing fiber identification.
JDSU offers two unique versions of the VFL that are economically priced and ergonomically designed for comfortable handling and portability. Both versions are equipped with a 2.5 mm interface and are compatible with connectors such as SC, ST, and FC, while the 1.25 mm adapter enables connection to LC and MU connectors. The VFL emits a bright red laser beam (Class II), making the light escaping from the damaged fiber easily visible from a distance. The Continuous/Flash control button lets operators choose between continuous or flashing illumination.
Features:
- Compact, ergonomic design for ultimate portability
- Visible wavelength is 650 nm
- High powered laser (1 mW) for single-mode (> 7 km) and multi-mode (> 5 km) connectors
- Continuous or Flash illumination
- Universal connector interface for quick and easy connection
Specifications:
Dimensions | 11.4 x 3.5 x 2.0 cm (4.5 x 1.4 x 0.8 in) |
Weight | 46 g (1.6 oz) with two AAA batteries |
Fiber Compatibility | Single-mode, Multimode |
Wavelength | 650 nm (visible) |
Laser Safety Rating | Class II |
Output Power | 1.0 mW max |
Output Modes | Continuous and flashing |
Range | > 7 km single-mode > 5 km multimode |
Connector Interface | Universal 2.5 mm (fixed) Universal 1.25 mm adapter (sold separately) |
Controls | ON/OFF Continuous/Flashing |
Battery Type | Two AAA |
Battery Life | 30+ hours on continuous |
Safety | 1992, EN 61010-2, CE |
JDSU MP-60 Mini Power Meter
Miniature USB Power Meter
The new MP-series power meter is a miniature device that measures optical power via a USB 2.0 connection to a PC/laptop. This unique device makes digital processing of optical power measurements possible and integrates directly with JDSU FiberChek Pro software, the industry-leading automated fiber inspection and analysis program. Its size, functionality, and ease-of-use makes it an extremely useful and practical tool when testing optical power levels. The simple, straightforward, and intuitive software interface offers a well-organized digital solution to both fiber inspection and test procedures.
Features:
- Lightweight, small form-factor design for ultimate portability
- Generates measurements in dB, mW, and dBm with auto-voice readout option
- Compatible with FiberChek Pro fiber inspection and analysis software; integrated reporting capabilities within FiberChek Pro
- Simple, accurate, and instant push-button measurement results can be electronically archived, logged, and printed
- Dedicated for all single-mode and multimode applications including LAN, telecom, CATV, and DWDM testing
- Automated data-logging capabilities
- Automatic wavelength detection
Applications:
- Takes power measurements for all single-mode and multimode connectors via a USB 2.0 connection to a PC/laptop
- Measures optical power with multiple pre-calibrated wavelengths: 850, 1300, 1310, 1490, and 1550 nm
- Integrates digital power measurements, fiber inspection, and analysis into a single, unified work sequence
Specifications:
Dimensions | 86 x 25 x 19 mm (3.4 x 1.0 x 0.8 in) |
Weight | 14 g (0.5 oz) |
USB type | USB 2.0 |
Connector input | Universal 2.5 and 1.25 mm connectors |
Measurement types | dB, mW, dBm |
Detector type | Germanium |
Power source | USB port on PC or laptop |
Display range | ヨ65 to +10 dBm |
Max. permitted input level | +13 dBm |
Intrinsic uncertainty | ±0.20 dB (±5%) |
Linearity (ヨ50 to +5 dBm) | ±0.06 dB |
Standard wavelength settings | 850, 980, 1300, 1310, 1490, 1550, 1625 nm |
Wavelength range | 780 to 1650 nm |
Wavelength and modulation | 270 Hz, 330 Hz, 1 kHz, 2 kHz |
1300, 1310, 1490, 1550, 1625 nm | ヨ50 to +10 dBm |
850, 980 nm | ヨ45 to +10 dBm |
For full JDSU HD2 product specifications, please click here: JDSU HD2
JDSU FBP-HD2-P2-V Fiber Inspection System w/
JDSU P5000 USB Fiber Inspection Probe w/
JDSU OLS-35 SM 1310 / 1550nm Fiber Source w/
FFL-050 Visual Fault Locator &
JDSU MP-60 SM MM USB Fiber Power Meter
Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
Includes FiberChek Pro Software, Carrying Case & Accessories As Listed
HD2 HD 2 P 5000 P-5000 OLS35 OLS 35 FFL 050 FFL050 MP60 MP 60
JDSU HD2-P2 HD2P2 Fiber Inspection Cleaning Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 20861 20860 20859
- JDSU HD2-P2-V Fiber Inspection System w/ Case (BC# 20861)
- VFL
- LC Connector
- JDSU P5000 USB Fiber Inspection Probe (BC# 20860)
- JDSU OLS-35 SingleMode Fiber Laser Source w/ Manual (BC# 20859)
- SM Source:
- 1310nm
- 1550nm
- SM Source:
- JDSU FFL-050 Visual Fault Locator w/ Manual
- JDSU MP-60 USB Power Meter
- Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- Power Meter:
- FBPT-U12-A6 Bulkhead
- FBPT-SC Bulkhead
- FBPT-LC Bulkhead
- FBPT-U25M Bulkhead
- FBPT-U12M Bulkhead
- 2.5mm Bulkhead
- Case For Bulkheads
- LC Connector Cleaner
- (2) SM LC-LC Duplex Fiber Cables
- JDSU FiberChek Pro Software CD
- FiberChek Quick Start Guide
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- Carrying Case