3M Dynatel 965DSP-B kit with accessories

3M Dynatel 965DSP-B Subscriber Loop Analyzer

JDSU HST-3000 E1 kit with accessories

JDSU HST-3000 Tester w/ E1 Module

JDSU HST-3000 SIM BDCM-WB2 xDSL ADSL Module

$445.00
Availability: In stock
SKU
1L86

Condition: Refurbished

Warranty: 1 YEAR WARRANTY

HST3000-BDCM-WB2 ADSL/VDSL Bonded and Copper (up to 30 MHz) with Broadcom Chipset
 

  • Saves money an reduces repeat faults with triple-play services testing capability in one Universal xDSL module that covers ADSL1, ADSL2, ADSL2+, VDSL2, Bonded ADSL, and Bonded VDSL
  • Provides critical ability to verify correct pair-bonding and provisioning
  • Provides investment protection in both CPE and DSLAM equipment, featuring the lates Broadcom chipset and compatible with the widest range of chipset manufacturers (Broadcom, Infineon, Ikanos/Conexant, and Texas Instruments)
  • Reduces troubleshooting time enabling users to segment single line performance issues of a bonded group and segment which pair requires further troubleshooting
  • Provides Hlog, and QLN graphing, which are key for identifying bridged tap, noise, and pair balance problems



Service providers face significant challenges when ramping up their networks to provide advanced triple-play services with the same or better quality than cable/ multiple switch operators (MSOs). A key success factor will be to cost-effectively increase bandwidth to subscribers for new IP video services over bonded asymmetric Digital Subscriber Line 2+/very high-speed Digital Subscriber Line 2 (ADSL2+/ VDSL2) while continuing to provide single line ADSL2+ service to subscribers without triple-play services capability. It is tempting to believe that the bonded two pair ADSL2+/VDSL2 connection can be tested similarly to single line ADSL connection, however, testing one pair at a time is insufficient. Internet Protocol television (IPTV) services require pristine xDSL service Layer 1 performance. Factors such as noise, crosstalk, pair imbalance, bridged taps, and other copper plant anomalies can be easily hidden when testing one pair at a time. Dual-pair bonded group testing is critical to ensuring that the service will be delivered to the subscriber with the best possible quality of service (QoS). Designed for the outside plant, the HST-3000 meets those challenges head-on.

Featuring the latest Broadcom Corporation chipset, the new service interface module (SIM) tests bonded-pair ADSL2+/VDSL2 by terminating both pairs of a bonded group. The Broadcom SIM also supports legacy ADSL1, ADSL2, ADSL2+, and VDSL2 in the same module, making it easy for technicians to switch between testing bonded and non-bonded services without having to swap modules. Further, the same module features dual tip/ring/ground interfaces for basic and advanced copper testing to further isolate copper pair problems. The new SIM provides additional testing power for field technicians who install and maintain access networks and high-bit-rate triple-play services, including IP Video.

The lightweight, rugged, and battery-operated HST-3000 with the Broadcom SIM cost-effectively scales to provide an all-in-one solution for field installation, maintenance, and troubleshooting across a wide range of triple-play service test applications.


For full JDSU BDCM-WB2 Module product specifications, please click here: JDSU BDCM-WB2 Module

JDSU HST-3000 SIM BDCM-WB2 Broadcom Bonded xDSL Module. 
ADSL1, ADSL2, ADSL2+, VDSL2, Bonded ADSL, Bonded VDSL And Copper (up to 30 MHz) Testing.

For Use With HST-3000 And HST-3000C Mainframes (Sold Seperately)!

HST3000 HST3000C HST 3000C 3000

JDSU HST-3000 BDCM-WB2 Service Interface Module BDCMWB2 Service Interface Module Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 39893-L/T*

  • JDSU HST-3000 SIM BDCM-WB2 Broadcom Bonded xDSL Module (BC# 39893-L/T*)
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!