Fujikura FSM-60R12 kit with accessories

Fujikura FSM-60R12 SM MM Ribbon Fusion Splicer

Fluke Networks OF-500 OptiFiber MM Fiber OTDR

Fluke Networks OF-500 OptiFiber MM Fiber OTDR

JDSU Validator Pro NT1150 Network LAN Ethernet Cable Tester

$1,895.00
Availability: In stock
SKU
1N10

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

 JDSU Validator Pro NT1150
Building on the capabilities of the JDSU Validator and Validator-NT, the JDSU ValidatorPRO series of Ethernet Network Management Tools offers a complete solution to test copper and fiber Ethernet cables. The ValidatorPRO Ethernet speed certifier with integrated optical power meter and accompanying Plan-Um cable management software delivers the power to test both copper and fiber cabling, determine if cables can support Gigabit Ethernet, and perform troubleshooting for cable installations. The ValidatorPRO performs all tests offered by the Validator and Validator-NT, including speed certifying the data-carrying capabilities of copper Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cabling wiring, and ensuring that cables can support the speed capabilities of active equipment.

To certify Ethernet speed performance of cable runs, the ValidatorPRO series of handheld testers conducts bit error rate (BER) tests by sending data packets down specified cable runs at defined data rates to check for errors at the maximum throughput of the link. The ValidatorPRO also reports on signal quality that can impact high-speed data transmission by measuring signal-to-noise ratio (SNR). Skew measurements provide the signal time delay between pairs that can impact Ethernet data transmission. The ValidatorPRO also provides continuity testing that detects opens, shorts, miswires, split pairs, reversals, and high-resistance faults while accurately measuring distance to faults and total cable length.

The ValidatorPRO includes an integrated optical power meter that measures optical power at 850/1300/1310/1490/1550 nm on multimode or single-mode fiber to address an increasing number of Ethernet networks that now include optical links.



Features:
  • Measures optical power on single mode and multimode fiber 
  • Conducts BER testing to speed certify Ethernet data transmission speed up to 1000BASE-T (1 Gb/s)
  • Measures SNR and skew to uncover impairments to electrical Ethernet data transmission
  • Tests for opens, shorts, split pairs, miswires, and reversals and measures distance to opens and shortsラsupports all copper network, telco, and coax cables

Applications:
  • Certify speed capability of electrical Ethernet cable runs to support 10/100/1000 Mb/s Ethernet applications
  • Ensure configuration and connectivity with active network devices
  • Measure optical power and insertion loss
  • Discover and display essential information regarding functionality of  802.11 b/g/n wireless devices
  • Document network topology including moves, adds, and changes

Specifications:
General
Display
 
Color back-lit FSTN liquid crystal display (LCD)
 
Operating System   Linux
 
Keypad Full navigations set with alphanumeric data entry
  and soft-key functions
Memory Non-volatile memory: internal NAND flash memory
  Volatile memory: 128 MByte DDR2 SDRAM memory
Languages supported (GUI)  English, French, Italian, German,
  Spanish, Portuguese, Korean, and Simplified Chinese
Interfaces - USB 2.0 host port (for external memory sticks)

- Optical Power meter for 850/1300/1310/1490/1550  nm
wavelengths. ヨ45 to +10 dBm dynamic range for 850 nm
and -50 to +10 dBm for all other frequencies. ±0.20 dB
accuracy. ±0.06 dB linearity. Measured in dB or dBm. Auto
wavelength selection with 270, 330, 1 k, 2 kHz modulation

- Wi-Fi 2.4 GHz 802.11 b/g/n standards with MIMO technology. Support 64/128-bit WEP encryption, WPA, WPA2,
and CISCO CCX security
Test Connectors ヨ  8-position shielded modular jack (data)
ヨ  6-position modular jack (telephone)
ヨ  F-coax (video) Male connector w/sacrificial adapter
ヨ  2.5 mm universal push pull (UPP) (Fiber
Cable Types ヨ  Shielded or unshielded twisted pair network cable
ヨ  Telephone
ヨ  Coax
ヨ  Single-mode and multimode fiber cable
Cable Length
Maximum cable length:   2,000 ft (600 meters)
Maximum cable length for testing of split pairs: Up to 100 meters (327 ft),depending upon cable type
Cable length accuracy  ±5% (after performing both unit and cable calibration)
Electrical
Power sources: AC adapter; auto cigarette lighter
  power adapter; lithium-ion rechargeable,
  removable batteries
Environmental
Operating temperature 0 to 50°C (32 to 122°F)
  (normal operation, not charging battery)
  0 to 45°C (32 to 113°F) (charging battery)
Storage temperature -20 to 60°C (ヨ4 to 140°F)
Operating humidity 10 to 85% RH,
  non-condensing
Shock and Vibration minimum 2 ft drop
  (free fall from stationary) on concrete
Safety: EN 61010-1
EMI/EMC EN 61326-1:2006
Altitude: 4000 m
Agency Certifications and Compliance
Main and Remote units: CE
Battery CE
AC wall adapter: CE, PSE, UL
Auto cigarette lighter power: CE
Calibration
Traceable Calibration Period: 2 Years
Self-Calibration Period:  30 days for unit calibration
  Perform cable calibration whenever
  changing cable type being measured
Physical
Main Unit Size 22.9 x 11.4 x 5.3 cm (9 x 4.5 x 1.8 in)
Weight 710 gm (1 lb 9 oz) with battery
Remote
Size 14.2 x 11.2 x 4.4 cm (5.6 x 4.4 x 1.8 in)
Weight 341 gm (12 oz) with battery





For full JDSU NT1150 product specifications, please click here: JDSU NT1150

JDSU Validator Pro NT1150 Network / LAN Cable Tester

The ValidatorPRO performs all tests offered by the Validator and Validator-NT, including speed certifying the data-carrying capabilities of copper Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cabling wiring, and ensuring that cables can support the speed capabilities of active equipment.

Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm

Includes Carrying Case & Accessories As Listed

Validator-Pro NT1150 NT-1150 NT1150

JDSU NT1150 NT-1150 Validator Pro Network LAN Cable Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 6292A-L/T* 6292B-L/T*

  • JDSU NT1150 Validator Pro Network LAN Tester (BC# 9126A-L/T*)
    • Power Meter:
      • 850nm
      • 1300nm
      • 1310nm
      • 1490nm
      • 1550nm
  • JDSU Validator Pro Remote (BC# 9126B-L/T*)
  • Remote Adapters #1-8
  • (2) RJ45 To Multiple Clip Cables
  • (2) TP74 Sacrificial Cables
  • (2) Ethernet Cables
  • (2) RJ11 Patch Cords
  • (2) Battery Packs
  • DC Car Charger
  • (2) AC Adapter/Chargers
  • USB PC Interface Cable
  • User Manual On CD-ROM
  • Carrying Case w/ Strap
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!