2J03 - 5 New Jilong KL-300T Fiber Fusion Splicer

The KL-300T Core Alignment fiber optic fusion splicer made by Jilong Communication is a solid reliable addition to any Technician’s tooling. In side by side specification comparisons the KL comes up first in more categories than the big three, Fujikura, Sumitomo or Fitel. The 300 triumphs in attributes like a 39 second splice/shrink cycle time, the second highest magnification on the market and lighter weight than all other standard fusion splicers.

But the KL-300T stands out even more with features that can’t be weighed & measured and put into a chart. Each and every time you interact with this machine you will appreciate features like a lighted fusion area, the largest screen on the market, a high resolution graphical user interface, easy to interpret universal buttons and frustration free menu navigation. Additionally when you see the video from the high resolution cameras you’ll know you’ve got a machine that will spoil you.

Features:

• Core to core alignment by PAS technology
  • ( PAS:Profile Alignment System)
• Digital fusion splicer with automatic focus function
• Fiber core can be display clearly
• Single X or Y view and X & Y view simultaneously
• Auto detect cleaved endface fault
• Display fiber cleaved and offset angle
• Display core and clad offset
• 5.6 inch TFT color LCD monitor with clear digital image display 
• USB & VGA interface
• Software upgrade via USB interface

Specifications:

Model	KL-300T
Applicable fibers	SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length	8~16mm(Coating diameter:250µm)    16mm(Coating diameter: 250 ~ 1000µm)
Fiber diameter	Cladding diameter:80 ~150µm   Coating diameter:100~ 1000µm
Fiber Count	Single
Fiber aligning method	Core or clad aligning
Image processing method	Digital
Actual average splice loss	0.02dB (SM), 0.01dB (MM),  0.04dB (DS), 0.04dB( NZDS)
Splicing time	Typical 9 sec,with standard SM fiber
Splicing mode	53(templet), 40(user)
Splice loss estimate	More accurate
Return loss	>60dB
Storage of splice result	4000 results,20 parameter per result
Fiber display and magnification	300X(X or Y view),150X(X and Y view)
Tube heating time	Typical 30 sec
Tube heating mode	9(templet), 24(user)
Tube heating temperature	Can be adjusted
Applicable Protection sleeve length	60mm, 40mm and a series of micro sleeves
Tension test	2N
Electrode life	2500
No.of splice/heating with battery	Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen	5.6 TFT inch color LCD monitor
Image change over	The fiber image is turned upside down
Terminals	USB 1.1 and VGA
Operating condition	0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50°C, respectively, Max. wind velocity of 15m/s
Power supply	AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions	150mm(L) x150mm (W) x150mm (H)
Weight	2.7 Kg excluding battery,3.2 Kg including battery

Splicing mode	Auto \Calibrate  Normal \Special
Fiber cleaved angle threshold set	0.1 - 10.0 °  0.1°step
Display fiber cleaved angle	?
Display fiber offset angle	?
Auto aligning	?
Auto detect cleaved endface fault	?
Display core offset	?
Display clad offset	?
Fiber partial core Compensation	?
Arc strength automatic adjustment	?
Display inside temperature	?
Display ambient temperature	?
Display heater temperature	?
Display air pressure	?
Display battery voltage	?
Taper Splice	?
Sleep	?
Auto Shut down	?
Software upgrade	?