2J05 - Agilent N3900A OTDR & New Jilong KL-300T Splicer

KL-300T

The KL-300T Core Alignment fiber optic fusion splicer made by Jilong Communication is a solid reliable addition to any Technician’s tooling. In side by side specification comparisons the KL comes up first in more categories than the big three, Fujikura, Sumitomo or Fitel. The 300 triumphs in attributes like a 39 second splice/shrink cycle time, the second highest magnification on the market and lighter weight than all other standard fusion splicers.

But the KL-300T stands out even more with features that can’t be weighed & measured and put into a chart. Each and every time you interact with this machine you will appreciate features like a lighted fusion area, the largest screen on the market, a high resolution graphical user interface, easy to interpret universal buttons and frustration free menu navigation. Additionally when you see the video from the high resolution cameras you’ll know you’ve got a machine that will spoil you.

Features:

• Core to core alignment by PAS technology
  • ( PAS:Profile Alignment System)
• Digital fusion splicer with automatic focus function
• Fiber core can be display clearly
• Single X or Y view and X & Y view simultaneously
• Auto detect cleaved endface fault
• Display fiber cleaved and offset angle
• Display core and clad offset
• 5.6 inch TFT color LCD monitor with clear digital image display 
• USB & VGA interface
• Software upgrade via USB interface

Specifications:

Agilent N3900A

The Agilent N3900A Modular Network Tester is a portable, lightweight, rugged test platform for the installation, commissioning and maintenance of optical networks. Developed from customer feedback from installation and maintenance (I&M) technicians worldwide, its modular design delivers the measurements you need, when you need them. Snap-on measurement modules meet your test requirements for today’s communications networks; the modular platform protects your investment, and lets you grow into your future measurement needs.

The Modular Network Tester can hold up to three modules to perform OTDR measurements, chromatic dispsersion, polarization mode dispersion or optical spectrum analysis, or a 1x12 Optical Switch module. A video microscope camera can be connected to ensure clean, fast and safe connector inspection as the connector surface picture can be analyzed on the 10.4” display. From the carrying case to the handles and tilt-stand, from the pop-up connector to your choice of interface, attention to detail and to your feedback provide the perfect fit for the way you work.

The Modular Network Tester is powered by a 64Bit RISC® processor architecture with a real-time operating system, VXWorks®, for mission critical operations. Each test engine has its own RISC processing power for ultra fast data acquisition and high accuracy post processing. The Modular Network Tester boots in one minute and all the modules can be hot-swapped – so it’s always ready to work when you are.

Ergonomic design The Modular Network Tester feels like an extension to your arm. It has a hand strap, an ergo grip, and a shoulder strap to work with you and keep your hands free. Attaching a fiber optic connector to a test engine has never been so safe and fast. The pop-up connector can be raised for connection and cleaning purposes and sits securely in the down position, protected by a dust cover while in transit.

The video microscope protects your eyes and speeds up your fiber optic connector cleaning procedures. Flash-card data storage is rugged and secure – there is no internal hard drive to crash. The Toolkit companion software, Toolkit III, prepares acceptance reports the way your customers want them and handles post-processing jobs to free you up for the next task.

Features

• Rugged lightwight and ergonomic design.
• Large, brilliant 10.4" color display, with touch screen functionality and cursor control.
• USB & LAN ports for connectivity to your PC
• Hot plug modules
• Secure and rugged data storage
• One day battery operating time

Specifications:

Storage	Internal Memory: 170 MB available memory
	3.5” floppy disk drive: for high density, 720/1440 KB floppy disks. MS-DOS format compatible.
PCMCIA	One Type III or two Type II PC Card slots
	Flash Disk: up to 512 MB
Display	SVGA-LCD: 25.9 cm (10.4”) color TFT display
	800 x 600 pixels (SVGA)
Human interface	Touch screen
	Cursor control navigation
	5 User programmable Soft keys
	On/Off key
	Help key
	Measurement Stop/Start key
	Power On indicator
	Battery charging indicator
	Battery charging level
Interfaces	Universal Serial Bus (USB 1.1): for connection with USB Video Microscope Camera N3988A
	USB 1.1 Peripheral: Transmission for up to 12 Mbit/s
	RS232C: 9-pin, maximum baud rate 115200 baud.
	Parallel Port: 25-pin, standard parallel port (Centronics)
	LAN: RJ-45 jack, (Ethernet 10/100)
	Keyboard: PS/2 port (Mini-DIN) for English Standard, PS/2 or AT keyboard
	VGA: Analog monitor output with SVGA resolution, 60 Hzb
	Headset: Standard microphone and speaker plugc
General	Operating temperature: 0 °C to +50 °C
	Storage temperature: -20 °C to +60 °C (without battery)
	Humidity: 95% Relative humidity from 0 °C to +40 °C
	Dimensions: 230 mm H, 330 mm W, 61 mm D (9.0” x 13” x 2.4”)
	Weight: net 3.3 kg (7.5 lbs), including battery pack.
Power supply	AC: 100 – 240 Vrms ± 10% 50 – 60 Hz.
	DC: 18 V, 60 W
	Battery: Lilon
	Battery operating time: typically 5 hours continuous measurements with standard OTDR test engine at 50% backlight setting.
	Charging Time: < 3 hours non-operating
	Battery deep discharge protection: provided

The Agilent OTDR Module N3910AM works together with the Agilent Modular Network Tester, and are easy to snap on. The OTDR application is uploaded in seconds due to the dynamic software architecture, and allows plug and play operation. Each OTDR test engine has built-in RISC processing power for fast and accurate trace acquisition and data processing. These test engines work in parallel processing mode with other connected test engines, for example, the 1x12 Switch module. All OTDR modules can be shared between multiple users, without the need for any software changes.

• All Done. All Right. After the measurements have been taken the Pass/Fail Test will automatically check for attenuation and insertion and return loss. The new Bending Test will locate both macro and micro bends.
• Easy Connector access and protection. The pop-up connector solves many common problems. For easy access to the optical fiber connection, the pop-up connector is released to the up position, where a fiber can be attached without any obstacles, or the connector cleaned. This also minimizes the risk of scratches to the connector. In the down position with the dust cover closed, the connector stays protected and clean during transit.
• Attach the right connector. Agilent's universal connector interface allows a large range of standard fiber optic connectors, such as FC/PC, SC, and LC, to be connected to the OTDR port. The connector interfaces are easy to attach, even when working on site, and once removed, the fiber ferrule is easily accessible for cleaning.
• Acceptance Test Done. The companion software, Toolkit III, prepares acceptance reports the way your customers want them, and handles post-processing jobs to free you up for the next task

Specifications:

Central wavelength [nm]	1310	1550
Tolerance [nm]	± 25	± 25
Dynamic range (dB)b

Pulse width	10 ns	19	17
	100 ns	24	22
	1µs	30	29
	10 µs	38	37
	20 µs	40	39