|
The KL-300T Core Alignment fiber optic fusion splicer made by Jilong
Communication is a solid reliable addition to any Technician’s tooling. In side
by side specification comparisons the KL comes up first in more categories than
the big three, Fujikura, Sumitomo or Fitel. The 300 triumphs in attributes like
a 39 second splice/shrink cycle time, the second highest magnification on the
market and lighter weight than all other standard fusion splicers.
But
the KL-300T stands out even more with features that can’t be weighed &
measured and put into a chart. Each and every time you interact with this
machine you will appreciate features like a lighted fusion area, the largest
screen on the market, a high resolution graphical user interface, easy to
interpret universal buttons and frustration free menu navigation. Additionally
when you see the video from the high resolution cameras you’ll know you’ve got a
machine that will spoil you.
Features:
-
Core to core alignment by PAS technology
- ( PAS:Profile Alignment System)
- Digital fusion splicer with automatic focus function
-
Fiber core can be display clearly
-
Single X or Y view and X & Y view simultaneously
-
Auto detect cleaved endface fault
-
Display fiber cleaved and offset angle
-
Display core and clad offset
-
5.6 inch TFT color LCD monitor with clear digital image
display
-
USB & VGA interface
-
Software upgrade via USB interface
Specifications:
|
Model |
KL-300T |
|
Applicable fibers |
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T
G.655) |
|
Fiber cleaved length |
8~16mm(Coating diameter:250µm)
16mm(Coating diameter: 250 ~ 1000µm) |
|
Fiber diameter |
Cladding diameter:80 ~150µm
Coating diameter:100~ 1000µm |
|
Fiber Count |
Single |
|
Fiber aligning method |
Core or clad aligning |
|
Image processing method |
Digital |
|
Actual average splice loss |
0.02dB (SM), 0.01dB (MM),
0.04dB (DS), 0.04dB( NZDS) |
|
Splicing time |
Typical 9 sec,with standard SM fiber |
|
Splicing mode |
53(templet), 40(user) |
|
Splice loss estimate |
More accurate |
|
Return loss |
>60dB |
|
Storage of splice result |
4000 results,20 parameter per result |
|
Fiber display and magnification |
300X(X or Y view),150X(X and Y view) |
|
Tube heating time |
Typical 30 sec |
|
Tube heating mode |
9(templet), 24(user) |
|
Tube heating temperature |
Can be adjusted |
|
Applicable Protection sleeve length |
60mm, 40mm and a series of micro sleeves |
|
Tension test |
2N |
|
Electrode life |
2500 |
|
No.of splice/heating with battery |
Typical 150 cycles (splice/tube heat) with inner
Li-battery |
|
Display screen |
5.6 TFT inch color LCD monitor |
|
Image change over |
The fiber image is turned upside down |
|
Terminals |
USB 1.1 and VGA |
|
Operating condition |
0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50°C,
respectively, Max. wind velocity of 15m/s |
|
Power supply |
AC 100-240V with AC adapter; inner
Li-battery(6600mAH) |
|
Dimensions |
150mm(L) x150mm (W) x150mm (H) |
|
Weight |
2.7 Kg excluding battery,3.2 Kg including
battery |
|
Splicing mode |
Auto \Calibrate
Normal \Special |
|
Fiber cleaved angle threshold set |
0.1 - 10.0 °
0.1°step |
|
Display fiber cleaved angle |
Yes |
|
Display fiber offset angle |
|
|
Auto aligning |
|
|
Auto detect cleaved endface fault |
|
|
Display core offset |
|
|
Display clad offset |
|
|
Fiber partial core Compensation |
|
|
Arc strength automatic adjustment |
|
|
Display inside temperature |
|
|
Display ambient temperature |
Yes |
|
Display heater temperature |
|
|
Display air pressure |
|
|
Display battery voltage |
|
|
Taper Splice |
|
|
Sleep |
|
|
Auto Shut down |
|
|
Software upgrade |
|
|
