| Model |
KL-280 |
| Applicable fibers |
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS
(ITU-T G.655) |
| Fiber cleaved length |
8~16mm(Coating diameter:250µm) 16mm(Coating diameter: 250 ~
1000µm) |
| Fiber diameter |
Cladding diameter:80 ~150µm Coating diameter:100~
1000µm |
| Fiber Count |
Single |
| Fiber aligning method |
Core aligning |
| Return loss |
>60dB |
| Actual average splice loss |
0.02dB (SM),0.01dB (MM), 0.04dB (DS),0.04dB( NZDS) |
| Splicing mode |
auto |
| Splicing mode |
12(templet), 188(user) |
| Typical Splicing time |
Typical 9 sec,with standard SM fiber |
| Protection sleeve length |
60mm, 40mm and a series of micro sleeves |
| Storage of splice result |
5000 results,3 parameter per result |
| Tension test |
2N |
| Fiber display and magnification |
400X(X or Y view),200X(X and Y view) |
| Tube heating time |
Typical 30 sec |
| Electrode life |
2500 |
| No.of splice/heating with battery |
Typical 130 cycles (splice/tube heat) with inner
Li-battery |
| Display screen |
5 inch color LCD monitor |
| Image change over |
The fiber image is turned upside down |
| Terminals |
RS 232 |
| Operating condition |
0 ~ 5000m above sea level,0 ~ 95%RH and
-10~50?,respectively,Max. wind velocity of 15m/s |
| Power supply |
AC 100-240V with AC adapter;inner Li-battery(6600mAH) |
| Dimensions |
150mm(L) x150mm (W) x160mm (H) |
| Weight |
3.52 Kg including battery |
