Konica Minolta CS-100 Chroma Meter
$1,995.00
Availability:
In stock
SKU
KM04
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Konica Minolta CS-100 Chroma Meter
The Minolta Chroma Meter CS-100 is a lightweight, compact meter for taking non-contact color measurements of light sources or reflective surfaces. It combines Minolta's years of experience in optics and colorimetry with advanced electronics for accuracy, portability, and easy operation.
The CS-100 has a 1° acceptance angle, and the through-the-lens viewing system accurately indicates the area to be measured. This system reduces flare, and results in measurements which are relatively unaffected by sources outside the indicated area. The CS-100 uses three high-sensitivity silicon photocells, filtered to closely match the CIE (Commission Internationale de i'Esclairage) Standard Observer response, to measure light received by the lens. Signals from the sensors are proccessed by a bulit-in microcomputer. Luminance data is displayed inside the viewfinder, and both luminance and chromaticity values are shown in the external display mounter on the side of the unit. The CS-100 can be used with optional close-up lenses, and is equipped with a data-output terminal for sending data to a separate computer (Such as the Data Processor DP-101) or being remotely controlled.
Specifications:
The Minolta Chroma Meter CS-100 is a lightweight, compact meter for taking non-contact color measurements of light sources or reflective surfaces. It combines Minolta's years of experience in optics and colorimetry with advanced electronics for accuracy, portability, and easy operation.
The CS-100 has a 1° acceptance angle, and the through-the-lens viewing system accurately indicates the area to be measured. This system reduces flare, and results in measurements which are relatively unaffected by sources outside the indicated area. The CS-100 uses three high-sensitivity silicon photocells, filtered to closely match the CIE (Commission Internationale de i'Esclairage) Standard Observer response, to measure light received by the lens. Signals from the sensors are proccessed by a bulit-in microcomputer. Luminance data is displayed inside the viewfinder, and both luminance and chromaticity values are shown in the external display mounter on the side of the unit. The CS-100 can be used with optional close-up lenses, and is equipped with a data-output terminal for sending data to a separate computer (Such as the Data Processor DP-101) or being remotely controlled.
Specifications:
| Type | TTL spot colorimeter for measureing light-source and reflected-light color |
| Receptors | 3 silicon photocells filtered to detect primary stimulus values for red, green, and blue light |
| Spectral Response | Closely matches CIE Standard Observer curves |
| Measureing modes and chromatic systems | Absolute color: Yxy (CIE 1931) Color difference: ± (Yxy) |
| Calibration: | PRESET: Minolta Standard Calibration VARI: User-selected calibration reference |
| Color-difference mode: | One memory channel for storing target color values (measured or in-put); difference from stored values determined by meter and displayed |
| Optical system: | 85mm f/2.8 lens; TTL (through-the-lens) viewing system |
| Acceptance angle: | 1° |
| Field of View: | 9° (with circular 1° indication) |
| Focusing distance: | 1014mm to infinity (minimum of 203mm using optional close-up lens) |
| Minimum target area: | 14.4mm at 1014mm (1.3mm using optional close-up lens) |
| Luminance units: | cd/m² or fL selectable |
| Luminance measuring ranges: | FAST: 0.01 to 299000 cd/m² (0.01 to 87500 fL) SLOW: 0.01 to 49900 cd/m² (0.01 to 14500 fL) |
| Accuracy: | Luminance (Y): ± 2% of reading, ± 1 digit in last-changing display position Chromaticity: ± 0.004 Based on Minolta's standard test methods. |
| Short-term repeatability | Luminance (Y): ±2% of reading, ± 1 digit in last-changing display position Chromaticity (x, y): FAST: Y above 100cd/m²: ±0.001 Y FROM 48.1 to 99.9 cd/m²: ±0.002 Y below 48.0 cd/m²: below measurement range SLOW: Y Above 25.0 cd/m²: ±0.001 Y above 12.0 to 24.9 cd/m²: ±0.002 Y below 11.9 cd/m²: below measurement range Based on Minolta's standard test methods |
| Displays: | External LCD panel: shows digital Y, x, and y values plus operation and error indications |
| Data output: | 1-bit serial, open-collector via Hirose RP17-13RA-12SD connector; remote control possible |
| Power source: | One 9V battery (Eveready 216 or equivalent); external power supply may be used via data-output terminal |
| Operating temperature: | 0 to 40°C (32 to 104°F) relative humidity less than 85% at 35°C with no condensation |
| Dimensions: | 208 x 79 x 154mm |
For full Konica Minolta CS-100 product specifications, please click here: Konica Minolta CS-100
Konica Minolta CS-100 Chroma Meter Non Contact Color Measurement Meter
The Minolta Chroma Meter CS-100 is a lightweight, compact meter for taking non-contact color measurements of light sources or reflective surfaces
Includes Carrying Case & Accessories As Listed
CS 100 CS100
Konica Minolta CS-100 CS 100 Chroma Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 38805-L/T*
- Konica Minolta CS-100 Chroma Meter (BC# 38805-L/T*)
- Lens Cap
- Protective Cap
- Base Plate
- User Manual On CD-ROM
- Hard Carrying Case
Request a Quote for