|
Features:
- DUALmode Testing to save Time: Reports channel and permanent link test results simultaneously
- Test with Patchcords toSave Money: Performs CAT5e/6/6a/ISO-D/E/Ea testing with standard patchords to reach the lowest cost of ownership
- The Industries first Certifier designed specifically to support the emerging Category 6a cabling standard
- Certifies to 500MHz to support 10 gigabi ethernet (10GbE) applications
- Includes new high performance adapters that support channel and permanent link certification of TIA5e/6/6a and ISO D/E/Ea UTP and STP cabling
- Meets proposed Level IIIe accuracy requirements
- Independently verified by ETL for baseline, channel and permanent link accuracy
LANTEK offers a family of high performance cable certification testers to support a full range of LAN cable testing. The LANTEK family of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making channel and permanent link certification of a cable standard such as CAT6a or ISO-F possible without changing adapters. The same patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the LANTEKs save you money and time on the job.
LANTEK 6A 500MHz is designed to support the emerging CAT6a Standard to certify LAN cabling to support applications up to 10G Ethernet.
The Only Tester in the World to Support DUALmode Testing to Save Time and Labor
Save time and money by simultaneously conducting any combination of two tests with LANTEK 6/6A/7G. For example, you can select a combination of channel/permanent link or CAT6a/ISO-F standards and get both test results in virtually the same amount of time as a single test. DUALmode can be used as either a troubleshooting tool or to provide an extra level of confidence to your customers by performing certification to additional test standards that demonstrate the quality of your work
Unique Adapter Scheme Reduces Cost of Ownership
LANTEK cable testers utilize an advanced link adapter method to reduce cost of ownership. All testers come with universal link adapters that are used for basic, channel, and permanent link testing. These channel adapters fit into the case of the unit and are locked in place. This creates a stable and repeatable testing platform while eliminating bulky adapters that extend beyond the end of the unit. Simply plug in the appropriate reference patchcord to the channel adapter, to perform permanent link testing.
| FEATURES |
LANTEK 6A |
| Frequency Range |
500 MHz |
| Supports CAT7 & ISO-F |
Upgradeable |
| Supports CAT6a |
? |
| Support CAT6/5e/3 and ISO-E/D/C |
? |
| Accuracy Level III/IIIe (Draft)/IV verified by |
ETL |
| Support DUALmode Testing to Save Time |
? |
| Test with Patchcords to Save Money |
? |
| Screen Display Area |
Best |
| CAT6 Test Storage with Graphs |
500 |
| Expansion Slots |
CompactFlash Card |
| Standard External Compact Flash Memory |
64MB |
| USB/Serial Port |
? |
| Copper TDR Trace |
? |
| Fiber Loss Measurement (FIBERTEK) |
Option |
| Fiber Distance to Break (TRACETEK) |
Option |
| Talk over Fiber & Copper (Full Duplex) |
? |
| Display Screen on Remote |
? |
| Troubleshooting Tone Generator on Remote |
? |
| External Rapid Battery Charger & Extra Batteries |
? |
Specifications
| Length 50 –100 O cable |
| Range |
0 – 2000 ft |
| Resolution |
1 ft |
| Accuracy |
± (3% + 3 ft) |
| Delay |
| Range |
0 – 8000 ns |
| Resolution |
1 ns |
| Accuracy |
± (3% + 1 ns) |
| Average Impedance Range |
| Range |
35 – 180 O |
| Resolution |
0.1 O |
| Accuracy |
± (3% + 1 O) |
| Capacitance (Bulk) |
| Range |
0 – 100 nF |
| Resolution |
1 pF or 3 dig |
| Accuracy |
± (2% + 20 pF) |
| Capacitance |
| Range |
0 – 100 pF/ft |
| Resolution |
0.1 pF |
| Accuracy |
± (2% + 1 pF) |
| DC Loop Resistance |
| Range |
0 – 200 O |
| Resolution |
0.1 O |
| Accuracy |
± (1% + 2 O) |
| Attenuation |
| Range |
1 MHz –1 GHz |
| Resolution |
0.1 dB |
| Accuracy |
Level III/IIIe(Draft)/IV |
| NEXT |
| Range |
1 MHz –1 GHz |
| Resolution |
0.1 dB |
| Accuracy |
Level III/IIIe(Draft)/IV |
| Return Loss |
| Range |
1 MHz –1 GHz |
| Resolution |
0.1 dB |
| Accuracy |
Level III/IIIe(Draft)/IV |
| ELFEXT |
| Range |
1 MHz –1 GHz |
| Resolution |
0.1 dB |
| Accuracy |
Level III/IIIe(Draft)/IV |
| Other |
| Noise Floor |
< –90 dB |
| Dynamic Range |
> 90 dB |
| General |
| Standard Test Compliance |
ANSI/TIA/EIA 568B, Category 3/5e/6/6a, ISO C/D/E/F, AS/NZS 3080, IEEE 802.3 Ethernet, EN50173, EN50173.A1 |
| Cable Types |
UTP/ScTP/FTP CAT 3/5e/6/7; ISO C/D/E/F (Channel and Permanent Link) IBM STP Type 1,2,6 Coax, 110/66/210 Block |
| Dimensions |
10.1" × 5.0" × 2.3" (256mm x 127mm x 58mm) Display and Remote |
| Weight |
2.3 lb (1050g) – Display
2.0 lb (914g) – Remote
1.2 lb (548g) – Battery |
| Battery Packs |
NiMH (rechargeable) |
| Typical Operating Life (Battery) |
8 hours |
| Maximum Operating Temperature |
0°C – 50°C |
| Maximum Storage Temperature |
–20°C to + 70°C |
| Humidity |
5–90% noncondensing |
Detector
Receive Wavelengths: |
MM: 850 and 1300 nm
SM: 1310 and 1550 nm |
| Measurement Accuracy: |
±0.03 - 0.05 dB @ -20dBm |
| Dynamic Range: |
MM: -53 dBm SM: -53 dBm |
| Fiber Type |
9.0/50/62.5/125 micron |
| Detector Type: |
INGaAs |
Transmitters
Power Output: |
850 (MM): -3 dBm into MM Fiber
1300 (MM): -10 dBm into MM Fiber
1310 (SM): -10 dBm into SM Fiber
1550 (SM): -10 dBm into SM Fiber |
| Source Type: |
850 (MM): VCSEL Laser 1300 (MM): Fabry Perot Laser
1310 (SM): Fabry Perot Laser 1550 (SM): Fabry Perot Laser |
| Filtering Type |
Kalman |
Signal Loss
Dynamic Range (MM)
Dynamic Range (SM) |
0 to -35 dB at Specified Accuracy
0 to -40 dB at Specified Accuracy |
Propagation
Delay
Accuracy
Resolution Range |
±4% or ±2.0 ns (the greater of)
±1.2 - 1.5 ns
0 – 300 ms |
Cable Length
Accuracy
Resolution
Distance Range |
±4% or ±0.3 m (the greater of)
±0.5 m
850 (MM) to 2 km
1300 (MM) to 5 km
1310 (SM) to 10 km
1550 (SM) to 10 km |
| Network Specifications |
1000BASESX/LX (Gigabit Ethernet)
ATM-155, ATM-622
Legacy Networks 100BASE-F
10BASE-FL, 10BASE-FL/FB, |
|
