Lantek 6
Get through your jobs faster than ever today and prepare yourself for the
future with LANTEK 6, the industry's most capable CAT 6/ISO E hybrid
copper/fiber certifier, testing applications up to 350MHz, well beyond CAT 6/ISO
E draft specifications.
The LANTEK 6 performs full Category 6/ISO E Autotest with graphs in
approximately 25 seconds. Plus the LANTEK 6 is fully upgradeable to LANTEK 7,
protecting your investment and giving you the maximum flexibility in meeting
your evolving certification needs.
LANTEK 6 utilizes advanced link adapter method to reduce cost of ownership.
LANTEK 6 comes with a pair of Category 6/ISO E channel adapters that fit into
the case of the unit and are locked into place. This creates a stable and
repeatable testing platform while eliminating bulky adapters. By simply plugging
in a Category 6/ISO E reference patch cord to the channel adapter, you can now
perform CAT 6/ISO E permanent link testing. Should the plug ever wear out,
simply replace the patch cord rather than the entire assembly reducing lifetime
ownership cost.
LANTEK 6 comes standard with all the items necessary to certify your job and
create certification reports including: Display Unit (with battery); Remote Unit
(with battery), LANTEK Reporter Software; Serial and USB Cables; two AC Wall
Adapters; two Talksets; two CAT 6 Channel Adapters; two CAT 6 Reference Patch
Cords; soft Carry Case; User Manual; Quick Start Guide; and Registration
Card.
Features:
- Fully compliant with Category 6/ISO E draft standards
- Full Category 6/ISO E AutoTest with graphs in approximately 25 seconds
- Tests Cat 7/ISO F limits up to 350 MHz
- Advanced link adapter method provides more versatrility & reduces cost
of ownership
- Built in TDR ready for copper and fiber
- Display unit comes with 1/4 VGA color screen, remote unit comes with
two-line black and white LCD display
- Serial and USP ports for uploading tests and upgrading firmware
| FEATURES
|
LANTEK 6 |
| Frequency Range |
350 MHz |
| Supports CAT7
& ISO-F |
Upgradeable |
| Supports CAT6a
|
Upgradeable |
| Support CAT6/5e/3
and ISO-E/D/C |
• |
| Accuracy Level III/IIIe
(Draft)/IV verified by |
ETL |
| Support DUALmode
Testing to Save Time |
• |
| Test with Patchcords to
Save Money |
• |
| Screen Display Area |
Best |
| CAT6 Test Storage
with Graphs |
500 |
| Expansion Slots
|
CompactFlash Card
|
| Standard External
Compact Flash Memory |
Option |
| USB/Serial Port
|
• |
| Copper TDR Trace |
• |
| Fiber Loss Measurement
(FIBERTEK) |
Option |
| Fiber Distance to
Break (TRACETEK) |
Option |
| Talk over Fiber
& Copper (Full Duplex) |
• |
| Display Screen on Remote
|
• |
| Troubleshooting Tone
Generator on Remote |
• |
| External Rapid Battery
Charger & Extra Batteries |
Option
|
Specifications:
| Internal memory |
No graphs approximately 6,000 tests |
With graphs approximately 100 tests |
| External memory 32MB compact flash |
No graphs approximately 24,000 tests |
With graphs approximately 400 tests |
| External memory 256MB compact flash |
No graphs approximately 192,000 tests |
With graphs approximately 3,200 tests |
| Standard test compliance |
ANSI/TIA/EIA 568B, Category 6 (draft),
ISO C/D and ISO E/F (draft), AS/NZS
3080, IEEE 802.3
Ethernet,
EN50173, EN50173A1 |
| Cable types |
UTP/ScTP/FTP
ISO C/D/E/F (Channel,
Basic, and Permanent Link)
IBM STP Type 1,2,6,Coax |
| Dimensions |
10.1" x 5.0" x 2.3" Display and
remote |
| Weight |
2.3 lb. Display |
2.0 lb. Remote |
1.2 lb Battery |
| Battery Packs |
NiMH rechargeable |
| Typical operating life (battery) |
8 hrs |
| Max. Operating Temp. |
32 to 122°F (0-50°C degrees) |
| Max Storage Temp. |
-4 to 158°F (-20 to +70°C degrees) |
| Humidity |
5-90% noncondensing |
| Series 6 |
Range |
Resolution |
Accuracy |
| Length (50-100O cable) |
0-2000ft |
1ft |
±(3% + 3ft) |
| Delay |
0-8000 ns |
1ns |
±(3% + 1ns) |
| Average Impedance |
35-180O |
0.1O |
±(3% + 1O) |
| Capacitance (bulk) |
0-100 nF |
1pF or 3 dig |
±(2% + 20 pF) |
| Capacitance |
0-100 pF/ft. |
0.1 pF |
±(2% + 20 pF) |
| DC Loop Resistance |
0-200O |
0.1O |
±(1% + 2O) |
| Noise Floor |
<-90 dB |
| Dynamic Range |
>90 dB |
Fiber Adapters
Detector
Receive
Wavelengths: |
MM: 850 and 1300 nm
SM: 1310 and 1550
nm |
| Measurement Accuracy: |
±0.03 - 0.05 dB @ -20dBm |
| Dynamic Range: |
MM: -53 dBm SM: -53 dBm |
| Fiber Type |
9.0/50/62.5/125 micron |
| Detector Type: |
INGaAs |
Transmitters
Power Output: |
850 (MM): -3 dBm into MM Fiber
1300 (MM):
-10 dBm into MM Fiber
1310 (SM): -10 dBm into SM Fiber
1550 (SM):
-10 dBm into SM Fiber |
| Source Type: |
850 (MM): VCSEL Laser 1300 (MM): Fabry Perot Laser
1310 (SM): Fabry Perot Laser 1550 (SM): Fabry Perot Laser |
| Filtering Type |
Kalman |
Signal Loss
Dynamic Range (MM)
Dynamic Range (SM) |
0 to -35 dB at Specified Accuracy
0 to -40
dB at Specified Accuracy |
Propagation
Delay
Accuracy
Resolution Range |
±4% or ±2.0 ns (the greater of)
±1.2 - 1.5
ns
0 – 300 ms |
Cable Length
Accuracy
Resolution
Distance Range |
±4% or ±0.3 m (the greater of)
±0.5 m
850 (MM) to 2 km
1300 (MM) to 5 km
1310 (SM) to 10 km
1550
(SM) to 10 km |
| Network Specifications |
1000BASESX/LX (Gigabit Ethernet)
ATM-155,
ATM-622
Legacy Networks 100BASE-F
10BASE-FL,
10BASE-FL/FB, |
|
