Ideal LANTEK® 7G LAN Cable Certification Tester
LANTEK offers a family of high performance cable certification
testers to support a full range of LAN cable testing. The LANTEK family of
certification testers uses the IDEAL patented measurement system that removes
the effects of ordinary patchcords, thus making channel and permanent link
certification of a cable standard such as CAT6A or ISO-F possible without
changing adapters. The same patented technology also makes DUALmode Testing
possible so the users can get any two test results simultaneously. As a result,
the LANTEKs save you money and time on the job.
Features
- High-performance LANTEK 7G sweeps up to 1 GHz and supports testing
requirements up to CAT 6/6a/7/ISO-F and beyond
- Level IV/IIIe/III accuracy - independently verified by ETL for baseline,
channel and permanent link
- DUALmode testing to save time - reports channel and permanent link test
results simultaneously
- Test with patchcords to save money - performs CAT6/5e/ISO-D/Ea testing
with standard patchcords to achieve the lowest cost of ownership
- Largest internal/external memory capacity - makes record management easy
- Convenient FIBERTEK™ accessory - simultaneously tests two fibers for
attenuation and length
- Innovative TRACETEK™ accessory - performs advanced fiber fault location
and troubleshooting functions
| FEATURES |
| Frequency Range |
1 GHz |
| Supports CAT7
& ISO-F |
X |
| Supports CAT6a
|
X |
| Support CAT6/5e/3
and ISO-E/D/C |
X |
| Accuracy Level III/IIIe
(Draft)/IV verified by |
ETL |
| Support DUALmode
Testing to Save Time |
X |
| Test with Patchcords to
Save Money |
X |
| Screen Display Area |
Best |
| CAT6 Test Storage
with Graphs |
500 |
| Expansion Slots
|
CompactFlash Card
|
| Standard External
Compact Flash Memory |
64MB |
| USB/Serial Port
|
X |
| Copper TDR Trace |
X |
| Fiber Loss Measurement
(FIBERTEK) |
Option |
| Fiber Distance to
Break (TRACETEK) |
Option |
| Talk over Fiber
& Copper (Full Duplex) |
X |
| Display Screen on Remote
|
X |
| Troubleshooting Tone
Generator on Remote |
X |
| External Rapid Battery
Charger & Extra Batteries |
X |
The Only Tester in the World to Support DUALmode Testing to Save Time and
Labor
Save time and money by simultaneously conducting any
combination of two tests with LANTEK 7G. For example, you can select a
combination of channel/permanent link or CAT6a/ISO-F standards and get both test
results in virtually the same amount of time as a single test. DUALmode can be
used as either a troubleshooting tool or to provide an extra level of confidence
to your customers by performing certification to additional test standards that
demonstrate the quality of your work.
Unique Adapter Scheme Reduces Cost of Ownership
LANTEK® cable testers utilize an advanced link adapter method
to reduce cost of ownership. All testers come with universal link adapters that
are used for basic, channel, and permanent link testing. These channel adapters
fit into the case of the unit and are locked in place. This creates a stable and
repeatable testing platform while eliminating bulky adapters that extend beyond
the end of the unit. Simply plug in the appropriate reference patchcord to the
channel adapter, to perform permanent link testing.
Specifications
| LANTEK |
Range |
Resolution
|
Accuracy
|
| Length (50-100
O cable) |
0 – 2000 ft |
1 ft |
± (3% + 3 ft)
|
| Delay
|
0 – 8000 ns |
1 ns |
± (3% + 1 ns)
|
| Average
Impedance |
35 – 180 O |
0.1 O |
± (3% + 1 O)
|
| Capacitance (Bulk) |
0 – 100 nF |
1 pF or 3 dig
|
± (2% + 20 pF)
|
| Capacitance |
0 – 100 pF/ft
|
0.1 pF |
± (2% + 1 pF)
|
| DC Loop
Resistance |
0 – 200 O |
0.1 O |
± (1% + 2 O)
|
| Attenuation |
1 MHz – 1 GHz
|
0.1 dB |
Level
III/IIIe(Draft)/IV |
| NEXT
|
1 MHz – 1 GHz
|
0.1 dB |
Level
III/IIIe(Draft)/IV |
| Return
Loss |
1 MHz – 1 GHz
|
0.1 dB |
Level
III/IIIe(Draft)/IV |
| ELFEXT
|
1 MHz – 1 GHz
|
0.1 dB |
Level
III/IIIe(Draft)/IV |
| Noise
Floor |
< –90 dB |
|
|
| Dynamic
Range |
> 90 dB |
|
LANTEK Reporter Software
LANTEK Reporter Software allows the installers to upload test
results and print reports to meet customer reporting requirements. The Reporter
can upload stored tests from LANTEK’s internal memory or compact flash card. The
software is designed to produce three different kinds of reports based on the
required level of detail:
- Single Line Report – one line per test
- Brief Report – a summary of test results with graphical
report
- Detailed Report – complete test results with graphs for
all tests and cable pairs
Detector
Receive
Wavelengths: |
MM: 850 and 1300 nm
SM: 1310 and 1550
nm |
| Measurement Accuracy: |
±0.03 - 0.05 dB @ -20dBm |
| Dynamic Range: |
MM: -53 dBm SM: -53 dBm |
| Fiber Type |
9.0/50/62.5/125 micron |
| Detector Type: |
INGaAs |
Transmitters
Power Output: |
850 (MM): -3 dBm into MM Fiber
1300 (MM):
-10 dBm into MM Fiber
1310 (SM): -10 dBm into SM Fiber
1550 (SM):
-10 dBm into SM Fiber |
| Source Type: |
850 (MM): VCSEL Laser 1300 (MM): Fabry Perot Laser
1310 (SM): Fabry Perot Laser 1550 (SM): Fabry Perot Laser |
| Filtering Type |
Kalman |
Signal Loss
Dynamic Range (MM)
Dynamic Range (SM) |
0 to -35 dB at Specified Accuracy
0 to -40
dB at Specified Accuracy |
Propagation
Delay
Accuracy
Resolution Range |
±4% or ±2.0 ns (the greater of)
±1.2 - 1.5
ns
0 – 300 ms |
Cable Length
Accuracy
Resolution
Distance Range |
±4% or ±0.3 m (the greater of)
±0.5 m
850 (MM) to 2 km
1300 (MM) to 5 km
1310 (SM) to 10 km
1550
(SM) to 10 km |
| Network Specifications |
1000BASESX/LX (Gigabit Ethernet)
ATM-155,
ATM-622
Legacy Networks 100BASE-F
10BASE-FL,
10BASE-FL/FB, |
| 
