Ideal LANTEK® 7G LAN Cable Certification Tester
LANTEK offers a family of high performance cable certification testers to
support a full range of LAN cable testing. The LANTEK family of certification
testers uses the IDEAL patented measurement system that removes the effects of
ordinary patchcords, thus making channel and permanent link certification of a
cable standard such as CAT6A or ISO-F possible without changing adapters. The
same patented technology also makes DUALmode Testing possible so the users can
get any two test results simultaneously. As a result, the LANTEKs save you money
and time on the job.
Features
- High-performance LANTEK 7G sweeps up to 1 GHz and supports testing
requirements up to CAT 6/6a/7/ISO-F and beyond
- Level IV/IIIe/III accuracy - independently verified by ETL for baseline,
channel and permanent link
- DUALmode testing to save time - reports channel and permanent link test
results simultaneously
- Test with patchcords to save money - performs CAT6/5e/ISO-D/Ea testing
with standard patchcords to achieve the lowest cost of ownership
- Largest internal/external memory capacity - makes record management easy
- Convenient FIBERTEK™ accessory - simultaneously tests two fibers for
attenuation and length
- Innovative TRACETEK™ accessory - performs advanced fiber fault location
and troubleshooting functions
| FEATURES |
| Frequency Range |
1 GHz |
| Supports CAT7
& ISO-F |
• |
| Supports CAT6a
|
• |
| Support CAT6/5e/3
and ISO-E/D/C |
• |
| Accuracy Level III/IIIe
(Draft)/IV verified by |
ETL |
| Support DUALmode
Testing to Save Time |
• |
| Test with Patchcords to
Save Money |
• |
| Screen Display Area |
Best |
| CAT6 Test Storage
with Graphs |
500 |
| Expansion Slots
|
CompactFlash Card
|
| Standard External
Compact Flash Memory |
64MB |
| USB/Serial Port
|
• |
| Copper TDR Trace |
• |
| Fiber Loss Measurement
(FIBERTEK) |
Option |
| Fiber Distance to
Break (TRACETEK) |
Option |
| Talk over Fiber
& Copper (Full Duplex) |
• |
| Display Screen on Remote
|
• |
| Troubleshooting Tone
Generator on Remote |
• |
| External Rapid Battery
Charger & Extra Batteries |
• |
The Only Tester in the World to Support DUALmode Testing to Save Time and
Labor
Save time and money by simultaneously conducting any combination of two tests
with LANTEK 7G. For example, you can select a combination of channel/permanent
link or CAT6a/ISO-F standards and get both test results in virtually the same
amount of time as a single test. DUALmode can be used as either a
troubleshooting tool or to provide an extra level of confidence to your
customers by performing certification to additional test standards that
demonstrate the quality of your work.
Unique Adapter Scheme Reduces Cost of Ownership
LANTEK® cable testers utilize an advanced link adapter method to reduce cost
of ownership. All testers come with universal link adapters that are used for
basic, channel, and permanent link testing. These channel adapters fit into the
case of the unit and are locked in place. This creates a stable and repeatable
testing platform while eliminating bulky adapters that extend beyond the end of
the unit. Simply plug in the appropriate reference patchcord to the channel
adapter, to perform permanent link testing.
Specifications
| LANTEK |
Range |
Resolution
|
Accuracy
|
| Length (50-100
O cable) |
0 – 2000 ft |
1 ft |
± (3% + 3 ft)
|
| Delay
|
0 – 8000 ns |
1 ns |
± (3% + 1 ns)
|
| Average
Impedance |
35 – 180 O |
0.1 O |
± (3% + 1 O)
|
| Capacitance (Bulk) |
0 – 100 nF |
1 pF or 3 dig
|
± (2% + 20 pF)
|
| Capacitance |
0 – 100 pF/ft
|
0.1 pF |
± (2% + 1 pF)
|
| DC Loop
Resistance |
0 – 200 O |
0.1 O |
± (1% + 2 O)
|
| Attenuation |
1 MHz – 1 GHz
|
0.1 dB |
Level
III/IIIe(Draft)/IV |
| NEXT
|
1 MHz – 1 GHz
|
0.1 dB |
Level
III/IIIe(Draft)/IV |
| Return
Loss |
1 MHz – 1 GHz
|
0.1 dB |
Level
III/IIIe(Draft)/IV |
| ELFEXT
|
1 MHz – 1 GHz
|
0.1 dB |
Level
III/IIIe(Draft)/IV |
| Noise
Floor |
< –90 dB |
|
|
| Dynamic
Range |
> 90 dB |
|
LANTEK Reporter Software
LANTEK Reporter Software allows the installers to upload test results and
print reports to meet customer reporting requirements. The Reporter can upload
stored tests from LANTEK’s internal memory or compact flash card. The software
is designed to produce three different kinds of reports based on the required
level of detail:
- Single Line Report – one line per test
- Brief Report – a summary of test results with graphical
report
- Detailed Report – complete test results with graphs for
all tests and cable pairs
| 
