Laser Precision LP-5250 LP-5000 SM Loss Test Set
Condition: Refurbished
Warranty: 90 Day Exchange
The LP-5200 Series Light Sources use lasers to inject light into sonnectorized optical fiber. When used with an optical power meter, they provide a means of measuring optical fiber integrity and/or loss.
The Optical power output is adjustable within 4 dB.
The LP-5210 and LP-5220 are single wavelength units that produce wavelengths of 1300 nm and 1550nm, respectively. The dual-wavelength LP-5250 provides selectable wavelengths at 1300 nm and 1550nm
The LP-5200 Series Light Sources can be powered by four internal "AA" nickel cadmium or alkaline batteries (switch selectable). The unit can be operated while recharging with the supplied DC Adapter/Charger.
Specifications:
Wavelength | 1310 nm ± 30 nm 1550 nm ± 20nm |
Optical Power | 100µw / -10 dBm min |
Adjustment Range | 4 dB Typ. |
Spectral Width (FWHM) | 5 nm Typ |
Stability @ 25°C @ 0 to 45°C |
±0.2 dB ±0.5 dB |
Modulation Modes | CW, 270 hz, 2 khz |
Power: Battery Life @ 25 °C Recharge (Not Operating) DC Adapter/Charger |
8-10 hours 12 hours 6 vdc unreg, 400 ma |
Operating Temperature Humidity |
-10 to 50 °C 95% RH max, non-condensing |
Non-Operating Temperature Humidity |
-30 to 60 °C 95% RH max, non-condensing |
Laser Precision LP-5000 Fiber Optic Power Meter
The LP-5000 series Fiber Optic Power Meters are rugged, hand held units that measure absolute optical power of light traveling in an optical fiber reading out in dBm. These power meters are calibrated at four selectable wavelengths at 780, 850, 1300 & 1550nm. All power readings and settings are presented on the backlit LCD display.
The LP-5000 with a measurement range of +5dBm to -60dBm is ideal for telecommunication and data communication testing applications (such as FDDI testing, End-to-end testing of installed links, splicing, etc.)
Specifications:
Form Factor | Handheld |
Sensor Type | Ge |
Number of Channels | 1 Ch |
Minimum Wavelength | 780nm |
Maximum Wavelength | 1550nm |
Power Resolution | 0.01 dB |
GN NetTest LP-5250 SM 1310/1550nm Light Source w/
GN NetTest LP-5000 SM MM Fiber Optic Power Meter
Please Note That The 1300nm Wavelength On The Power Meter Can Be Used To Also Read 1310nm (Refer To User Manual)
Power Meter:
- 780nm
- 850nm
- 1300nm
- 1550nm
The LP-5000 with a measurement range of +5dBm to -60dBm is ideal for telecommunication and data communication testing applications (such as FDDI testing, End-to-end testing of installed links, splicing, etc.)
Includes Carrying Case & Accessories As Listed
LP 5000 5250 LP5250 LP5000
Laser Precision LP-5250 LP-5000 LP5250 LP5000 SM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 19950 19951
- GN NetTest LP-5250 SingleMode Fiber Light Source (BC# 19951)
- SM Source:
- 1310nm
- 1550nm
- SM Source:
- GN NetTest LP-5000 SM MM Fiber Power Meter (BC# 19950)
- Power Meter:
- 780nm
- 850nm
- 1300nm
- 1550nm
- Interchangeable ST Connector For Power Meter
- ST Connector For Source
- Power Meter:
- (2) SM ST-ST Fiber Cables
- User Manual On CD-ROM
- Carrying Case (G)