Midtronics CAD-5200 Celltron Advantage Battery Analyzer
$3,399.00
Availability:
In stock
SKU
ME10
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Midtronics CAD-5200 Battery Analyzer
Battery management and testing are critical for maintaining power integrity for telecom networks, data centers, utility transmission and distribution systems. The demand placed on these systems has increased dramatically in the past decade. Service providers, operations and maintenance teams need to gain an advantage over this mounting responsibility. The CELLTRON ADVANTAGE system provides a user-customizable, flexible, efficient and economical tool to take on this critical task.
Features complete software modularity/add-ons for just what is needed to get the job done:
Specifications:
Battery management and testing are critical for maintaining power integrity for telecom networks, data centers, utility transmission and distribution systems. The demand placed on these systems has increased dramatically in the past decade. Service providers, operations and maintenance teams need to gain an advantage over this mounting responsibility. The CELLTRON ADVANTAGE system provides a user-customizable, flexible, efficient and economical tool to take on this critical task.
Features complete software modularity/add-ons for just what is needed to get the job done:
- Base unit provides battery Conductance (state of health assessment), voltage and integrated temperature measurement • Custom modules available to meet battery p
- Decision/Algorithm that provides estimated Ampere Hours by battery jar
- Guided test interface to simplify technician interaction
- Integrated site trending capability
- o Multimeter functionality
- Discharge test manager: increase automation and accuracy of discharge test
- Generator starting battery test
- Highly efficient test process: 50% reduction in test time from other battery analyzers
- Less invasive testing approach reduces battery discharge, voltage measurement skew and allows for more tests on a single internal battery without recharge
- Full compatibility with Midtronics CELLTRAQ Battery Data Management System for simple and efficient data tracking, reporting and decision making; data transfer via USB
- Field software updates, including module add-ons
- Interchangeable test interfacesfor technician ease of use and lower maintenance cost
- Integrated battery temperature measurement
- Integrated lighted test interfaces
- Test continuity/accuracy indication on test interfaces
- USB data connection and storage compatible
- On board battery pack to support test time of 6-8 hours
- Telecom/DC Plants online
- All UPS applications
- Battery voltages down to 1 volt
- Field software updates, including module add-ons
- RFID interface with batteriesto capture system setup and store and update battery test parameter history on site
- Drives initiation of advanced AH algorithm when SMART CABLE is utilized
Specifications:
| Applications: | Tests Individual Lead-Acid or Nickel-Cadmium cells or Monoblocks (uptto 16 Volts) in any common conifguration, approximately 10-6000Ah. |
| Voltage Range | 1.5 - 20.0 Volts DC |
| Conductance Range: | 100 - 19,990 Siemens |
| Test Data storage: | 50 String location of 280 Test results Stored internally |
| Accuracy: | +/- 2° Across test range, Volage and conductance |
| Voltmeter Resolution | 5mV |
| Keypad: | Alpha-numeric, Stainless-steel Dome, Polycarbonate overlay, 1,000,000 actuations |
| Data transfer: | USB Flash Drive (Type A) USB PC Interface (Type B) Infra-Red, Half Duplex IRDA protocol for printer |
| Environmental operating range: | 0 to 40°C, 95% relative humidty, non-condensing |
| Storage temperature | -20 to 82°C |
| Over Voltage Protection: | Auto-reset disconnect Reverse polarity protected |
| Housing Material: | Acid-resistant ABS plastic Santoprene overmold |
| User Programmable Function: | Preset values for over 250 battery types Low voltage alarm setting Low conductance warning Low conductance failure Test Mode (Pushbutton/auto start) |
| Calibration: | Auto-calibration prior to every test, no future calibration required Connectorized test |
| Cable Options: | Dual Contact Clamps Dual contact probes Cust cables by quotatition |
| Power Requirements: | 7.2V, 2500mAh, NiMH Internal Swappable Battery & Charger |
| Display | LCD- FST 2.97 in x 2.81 in (75.4 mm x 71.3mm), 128 x 128 Pixels, 40 degree viewing angle, contrast ratio, LED backlight |
| Analyzer Dimensions | 11in x 4in x 3in 80mmx150mmx80mm |
| Case dimensions: | 19inx15.5x7in 485mmx395mmx180mm |
| Analyzer weight: | 1 Kg/2.6 lb |
Midtronics Celltron Advantage CAD-5200 Battery Analyzer
Installed Expansion Modules:
- Multimeter
- Generator Test
Base unit provides battery Conductance (state of health assessment), voltage and integrated temperature measurement
Highly efficient test process: 50% reduction in test time from other battery analyzers.
Includes Hard Carrying Case & Accessories As Listed
CAD 5200 CAD5200
Midtronics Celltron Advantage CelltronAdvantage Battery Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
Installed Expansion Modules:
- Multimeter
- Generator Test
Base unit provides battery Conductance (state of health assessment), voltage and integrated temperature measurement
Highly efficient test process: 50% reduction in test time from other battery analyzers.
Includes Hard Carrying Case & Accessories As Listed
CAD 5200 CAD5200
Midtronics Celltron Advantage CelltronAdvantage Battery Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 33163-L/T*
- Midtronics Celltron Advantage Battery Analyzer w/ Expansion Modules: (BC# 33163-L/T*)
- Multimeter
- Generator Test
- Celltron Interchangeable Test Cable
- Celltron Probe Set
- Midtronics CA069 CAD Probe Replacement Kit
- (2) Battery Packs
- AC Adapter/Charger
- USB PC Interface Cable
- User Manual On CD-ROM
- Hard Carrying Case
Request a Quote for