Sadelco MiniMax M Signal Level CATV Meter
$0.00
Availability:
Out of stock
SKU
WM63
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Request a Quote for
Sadelco MiniMax M CATV Meter
The Minimax and Minimax-M hand-held meters incorporate state of the art technology to make signal level measurement faster and easier than ever before. Auto-calibration, using a built-in white noise source, corrects every measurement for frequency response, attenuator setting, and temperature. Keypad tuning, an autoranging attenuator and digital readouts allow novice users to take accurate, foolproof readings with minimal training.
The full keypad provides instant access to all channels and frequencies. Dedicated keys for all functions eliminate the need to look up hidden commands or menus. Advanced features include C/N, Hum, Favorite Channel Programming, and ? Picture-Audio.
Minimax-M Models have been tailored for the MMDS installer. An extra battery provides switchable 18 V power at the F connector for powering the downconverter and a microammmeter makes antenna alignment easy. A special channel plan designed for MMDS is standard on these models.
All models are programmed with the most commonly used channel plans. Additional standard and custom plans are also available.
Features:
Specifications:
For full Sadelco MiniMax M product specifications, please click here: Sadelco MiniMax M
The Minimax and Minimax-M hand-held meters incorporate state of the art technology to make signal level measurement faster and easier than ever before. Auto-calibration, using a built-in white noise source, corrects every measurement for frequency response, attenuator setting, and temperature. Keypad tuning, an autoranging attenuator and digital readouts allow novice users to take accurate, foolproof readings with minimal training.
The full keypad provides instant access to all channels and frequencies. Dedicated keys for all functions eliminate the need to look up hidden commands or menus. Advanced features include C/N, Hum, Favorite Channel Programming, and ? Picture-Audio.
Minimax-M Models have been tailored for the MMDS installer. An extra battery provides switchable 18 V power at the F connector for powering the downconverter and a microammmeter makes antenna alignment easy. A special channel plan designed for MMDS is standard on these models.
All models are programmed with the most commonly used channel plans. Additional standard and custom plans are also available.
Features:
- Power Out: Extra large battery provides switchable 18V at F connector (MINIMAX-M Models only)
- C/N: Range >50 dB with external preselector, Accuracy +/- 2 dB
- Hum: 0.5 - 5%, +/- 0.3%, detects all hum up to 600 Hz
- Favorite Channels: 9 User Programmable Channels
- ?PA: Calculates and displays difference between Picture and Audio carriers of same channel
- Audio: Adjustable volume, waterproof mylar speaker
- Illumination: Switchable lights for both LCD and Microammeter
- Battery Test: Shows battery voltage and elapsed time
- Power Supply: Replaceable nicad packs provides > 16 hrs of normal intermittent use
- Electronic Shutoff: User adjustable - 5 min, 10 min., continuous
- Digital Channel Measurement: Measures average digital power, Accuracy +/-1.8 dB
Specifications:
FREQUENCY RANGE | |
MINIMAX M | 47 - 600 MHz |
STANDARD CHANNEL PLANS | |
MINIMAX M | EIA, HRC, IRC, AIR (VHF, UHF, FM), MMDS |
TUNING INCREMENTS: | |
Frequency Mode: | 125 KHz |
Channel Mode: | 6, 7, or 8 MHz |
FREQUENCY ACCURACY: | +/- 20 KHz |
IF BANDWIDTH: | 280 KHz at 3 dB points |
ADJACENT CHANNEL REJECTION: | 40 dB or better |
FM SELECTIVITY: | Will distinguish 2 FM signals of similar amplitude 300 KHz apart |
MEASUREMENT RANGE: | |
MINIMAX-M Models: | -20 to +40 dBmV (+40 to +100 dBuV) |
AMPLITUDE ACCURACY: | |
+/- 1.0 dB at 770 F | (+/- 0.5 dB typical) |
+/- 2.0 dB from 0 - 1200 F | (+/- 1.0 dB typical) |
AUTO-CALIBRATION: | |
Each measurement computer corrected for level, attenuator setting and temperature. Internal Calibrator: +/- 0.25 dB, 4.5 - 872 MHz White Noise Source | |
AUTORANGING ATTENUATOR: | |
Range: | MINIMAX-M: 20 dB |
Input: | 75 ohm, user replaceable F81 connector BNC |
DISPLAY: | |
Digital LCD: | Indicates channel, frequency, and signal level in dBmV (switchable to dBuV) |
MINIMAX-M Models only: | |
Analog Microammeter: | Indicates real time signal level for easy antenna orientation, +/- 1.5 dB |
DIMENSIONS: | |
MINIMAX-M: | 8.5”L x 4” W x 3.0” D, 21 cm x 10 cm x 7.6 cm |
WEIGHT | |
MINIMAX-M: | 4.5 lbs, 2.0 Kg, including case and batteries |
For full Sadelco MiniMax M product specifications, please click here: Sadelco MiniMax M
Sadelco MiniMax M Signal Level CATV Meter
Frequency Range: 47 - 600 MHz
MiniMaxM MiniMax-M
Sadelco MiniMax M CATV Meter MiniMax-M CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- Sadelco MiniMax M Signal Level meter