INNO View 500 SM Fiber OTDR & View 3 Active Clad SM MM Fusion Splicer
Condition: Brand NEW / Calibrated
Warranty: 3 YEAR WARRANTY
Inno Instruments View 500 SM Fiber Optic OTDR
The VIEW500 OTDR is used in the installation and maintenance of fiber optic cables. Features of the VIEW500 OTDR include high precision test capabilities, fast response times, and easy to learn operation. The multi-point capacitive touch screen allows for user-friendly operation. The VIEW500 offers accurate and fast test results and creates a report automatically. The VIEW500 is equipped with an industrial grade CPU for creating and storing test results.
Features:
- SOLA (Smart Optical Link Analyzer
- 7” Touch Screen with Smart GUI
- 8GB Internal Storage with Internal SD Card & External USB Memory
- Built-In VFL, Light Source and OPM
- Fast Booting Time
- Ultra-High Capacity Battery
OTDR
OTDR mode allows for measuring distance, loss, reflectivity, attenuation and accumulation loss on a fiber optical link.
VFL
VFL allows for finding direct fault locations in fiber test dead zones or performing fiber core calibration in multi-fiber cables.
OPM
OPM is used for measuring the absolute optical power meter or relative optical power loss through the span of the optical fiber.
SOLA
SOLA is an application for the OTDR, designed to simplify OTDR test process without the need to configure the parameters or analysis while parsing multiple complex OTDR curves.
FIBER MICROSCOPE
Fiber end tester (peripheral required) is mainly used to test the cleanliness and flatness of the fiber end face.
LIGHT SOURCE
Invisible light source (1310 or 1550ns) can provide the following types of light, including CW light, 1kHz light, 2kHz light, 1kHz blink light, 2kHz blink light.
ULTRA-HIGH CAPACITY BATTERY
VIEW500 offers the ultra-high battery capacity of 7800mAh.
Specifications:
Display | 7 inches, High Brightness TFT LCD, resolution of 800×480 |
Distance unit | m / km / mile / ft |
Dynamic range | 35dB / 33dB (1310nm / 1550nm) |
Measurement range (km) | 1.3, 2.5, 5, 10, 20, 40, 80, 120, 160, 360km |
Measurement range (mile) | 0.81, 1.55, 3.11, 6.22, 12.4, 24.8, 49.6, 74.6, 99.4, 223.7 mile |
Pulse width | 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 10μs, 20μs |
Event dead zone | 0.8m |
Attenuation dead zone | 4m |
PON dead zone | 40m |
Distance accuracy | ±(1m+Distance×2.5×10-5 +Sampling resolution) |
Loss scale linearity | ±0.1dB or ±0.05dB / dB |
Sampling points | 160,000 points |
Splitting ratio | Up to 1:64 splitter |
Resolution | 0.04m ~ 10.24m |
Battery capacity | Operating Time : Up to 12hours |
File format | SOR(Telcordia), BMP, JPG |
External connection | USB 2.0 |
Compatible connector | APC(FC, SC, LC), UPC(FC, SC, LC, ST) |
Power supply | AC Input 100-240V, 50-60Hz / DC Input 19V, 3.42A |
VFL Distance | Up to 15km |
VFL Module | Operating wavelength: 650nm ±10nm, Universal interface: 2.5mm |
VFL Output power | 20mW |
Light source | Operating wavelength: 1310nm / 1550 nm ±10nm |
Light source output power | -5dBm |
Optical power meter | Wavelength calibration: 850 / 1300 / 1310 / 1490 / 1550 / 1625 / 1650nm |
Power range (OPM) | -70 to +6dBm |
Accuracy (OPM) | 0.01dB |
Unit display for OPM | dB, dBm, uW |
PACKAGE | |
OTDR | VIEW500 |
Power cable / AC Adapter | ACC-25 / JS-180300 |
GENERAL SPECIFICATIONS | |
Dimension | 7.08H x 10.70W x 2.44D inches (180H x 272W x 62D mm, excluding rubber bumper |
Weight | 4.19pounds (1.90kg with battery) |
Operating conditions | -10~50? |
Storage conditions | -20~60?, |
Relative humidity | 0~95% (Noncondensing) |
For full Inno View 500 product specifications, please click here: Inno View 500
Inno View 3 Clad Alignment Fiber Fusion Splicer
View 3, an active clad-alignment splicer with the world’s highest fiber image magnification rate, is the most dependable fusion splicer in the market. View 3’s 5 inch high-resolution color LCD touch screen with user-friendly intuitive GUI (Graphic User Interface) offers large and clear fiber images to users. By double-tapping the screen, users can Zoom In & Out the image to the world’s highest magnification of 520x. Moreover, the 3 LED lights provide bright splice condition to the users working under dark environments. View 3 is the new industry standard of active clad-alignment splicer in the telecommunications industry.
Features:
- Active V-Groove Clad Alignment Splicing Method
- The Highest Magnification and Resolution
- 5" Color LCD Touch Screen
- Double Tapping (Zoom in & out)
- Detachable SOC Holder and Heating Oven
- 3 Bright LEDs for Dark Environments
- Ceramic Clamp for Improved Durability
Specifications:
Dimension | 143H x 130W x 155D mm (excluding rubber bumper) / 152H x 147W x 175D mm (including rubber bumper) |
Weight | 2.31KG (with battery) / 1.95KG (without battery) |
Number of Fiber | Single |
Applicable Fibers | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
Compatible Fiber / Cable | 0.25~3.0 mm / Indoor Cable |
Cleaved Length | Diameter: 0.125~1 mm / Cleave Length: 8~16 mm |
Splicing Mode | Max 128 modes |
Heating Mode | Max 32 modes |
Typical Splice Loss | SM: 0.02dB / MM:0.01dB / DS:0.04dB / NZDS: 0.04dB / G.657: 0.02dB(ITU-T Standard) |
Return Loss | >>60dB |
Lighting | 3 White LEDs |
Splicing Time | Quick mode : 7 sec / SM mode : 9 sec |
Estimated Splice Loss | Available |
Protection Sleeve Length | 20~60 mm |
Heating Time | FP-03 typical heating time: 30 sec |
Results Storage | The last 2000 results |
Tension Test | 1.96~2.25N |
Operating Condition | Operating Altitude: 0~5000m above sea level, 0~95% relative humidity, -10~50°C, Max Wind 15m/s |
Storage Condition | 0~95% relative humidity, -40~80°C |
Display | 90° bi-directional view, 5.0” Color High Resolution Display |
Fiber View & Magnification | X, Y, XY, X/Y : 520X Magnification |
Power Supply | AC Input 100-240V, DC Input 9-14V |
No. of Splice / Heating with Battery | 4200mAh Battery Capacity, Typical 170 times (Splice+Heat) |
Operating Methods | Button / Touch screen |
Automatic Calibration | Automatic arc calibration by air pressure and temperature |
Electrode Life | 3500 arcs, can be extended by using an electrode grinder |
Terminal | USB2.0 / MINI USB |
Inno View 500 SingleMode 1310 / 1550nm Fiber OTDR w/ Power Meter, VFL & Light Source
&
INNO View 3 SM MM Active Clad Alignment Fiber Fusion Splicer
Choose between APC or UPC Connector Polish Style
This Is A Brand New Kit With A 3 Year Warranty
Fusion Splicer & OTDR Promotional Combo Kit!
Dynamic Range:
1310 / 1550 nm : 35 / 33 dB
Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm
SM Source:
- 1310nm
- 1550nm
Visual Fault Locator
View 3 Average Splice Loss:
- SM: 0.02dB
- MM: 0.01dB
- DS: 0.04dB
- NZ: 0.04dB
Includes Hard Carrying Cases & Accessories As Listed
VIew3 View-3 View-500 View500
Inno View 500 View 3 View500 OTDR & Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 31720 17302M 33691
- Inno View 500 SM Fiber OTDR (BC# 33691)
- SM OTDR Source:
- 1310nm
- 1550nm
- Light Source:
- 1310nm
- 1550nm
- SC Connector For Source
- FC Connector For Source
- Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm.
- FC Connector For Power meter
- Visual Fault Locator
- SM OTDR Source:
- Inno ACC-25 Power Cable
- Inno JS-180300 AC Adapter
- Stylus
- (4) Fiber Wipes
- Case For Unit
- Hard Carrying Case w/ Strap
- INNO View 3 SM MM Clad-Alignment Fiber Fusion Splicer
- INNO V7 High Precision Fiber Cleaver
- Clauss CFS-2 Fiber Optic Strippers
- VFH-50 / FH-SOC Fiber Holder
- FH-SOC Heater Cover
- CG-22 Cooling Tray
- E-50 Electrode
- EG-18 Electrode Grinder
- LBT-40 Battery Pack
- JS-180300 AC Adapter
- ACC-25 Power Cable
- CJ-11 Cigarette Lighter Cable
- User Manual On CD-ROM
- NBX-35 Carrying Case