AFL Noyes OFL 280-103 SM Fiber OTDR w/ VFL PM
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Noyes OFL 280-103 FlexTester SM Fiber OTDRNoyes OFL 280-103
OFL280-103 triple-wavelength model adds ServiceSafe? live fiber detection with integrated PON Power Meter. Configuration is simple with the following functions provided from a single test port:
Certify dark PON and point-to-point networks at 1310/1550 nm
Perform high-resolution fault-location of dark or live FTTx PONs at 1625 nm
Measure FTTx power levels at 1490 and 1550 nm
OFL280-103 Fiber Testing Applications:
Point-to-point cable construction and troubleshooting
Fiber loss, splice/connection loss and reflectance, fault-location
FTTx PON construction
Fiber loss, splitter loss and reflectance, splice or connection loss and reflectance, fault-location 1
FTTx customer fiber troubleshooting - dark fibers (hard faults)
Locate cable cuts, open splices, and bad connections
Features
- Rugged, handheld and light weight
- Standard OTDR, PON OTDR, live fiber OTDR, and FTTx PON meter all from the same test port
- 0.8 m event dead zone, 3.5 m attenuation dead zone
- 34 dB dynamic range
- Fast Real Time OTDR mode
- Internal storage (>1000 OTDR traces in standard .SOR format)
- High-contrast display is clear and bright in any lighting condition, including direct sunlight
- Transfer test results to a PC via USB
- 10-hour operation, fast charge, Li-Ion battery
- Short power-on time (< 5 sec)
- Easy to use and learn
Applications
- PON OTDR - FTTx PON construction certification
- Live Fiber OTDR - FTTx service turn-up and troubleshooting
- Full Auto OTDR - Normal (point-to point) fiber cableconstruction testing and fault location
- Expert OTDR - Full function OTDR for experienced users
- Real Time OTDR - Fault location, splice verification, first connector checker
- End Locator - Quickly locate breaks or measure fiber length
- Optical Power Meter -Measure optical power or fiber loss
- Laser Source - Measure end-to-end loss or trace fibers using the tone feature and a Noyes OFI
- Visual Fault Locator - Red laser for fiber bend/break location and tracing
OTDR SPECIFICATIONS:
| Emitter Type | Laser |
| Safety Class | Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 |
| Fiber Type | Single-mode |
| Available Wavelengths | 1310/1550 nm |
| Wavelength Tolerance | ±20/±20 nm |
| Dynamic Range (SNR=1) | 34/32 dB |
| Event Dead Zone 1 | 0.8 m |
| Attenuation Dead Zone 2 | 3.5 m |
| Pulse Widths | 5, 10, 30, 100, 300 ns, 1, 3, 10 µs |
| Range Settings | 250 m to 240 km |
| Data Points | Up to 30,000 |
| Data Point Spacing | 5.0 cm (range < 1.5 km), Range/30,000 (range > 1.5 km) |
| Group Index of Refraction (GIR) | 1.4000 to 1.6000 |
| Distance Uncertainty (m) | ± (1 + 0.005% x distance + data point spacing) |
| Trace File Format | Bellcore GR-196 V.1.1 |
| Trace File Storage Medium | Internal memory (>1000 traces) |
| Data Transfer to PC | USB cable |
| PON OTDR Modes | FTTx - PON Construction, FTTx - In Service |
| Standard OTDR Modes | Full Auto, Expert, Real Time |
Optical Power Meter
| Calibrated Wavelengths | 1310, 1490, 1550, 1625, 1650 nm |
| Detector Type | InGaAs |
| Measurement Range | +23 to ? 50 dBm |
| Tone Detect Range | +3 to -35 dBm |
| Wavelength ID Range | +3 to -35 dBm |
| Accuracy | ± 0.25 dB |
| Resolution | 0.01 dB |
| Measurement Units | dB, dBm or Watts |
laser Source
| Emitter Type | Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 |
| Fiber Type | Single-mode |
| Available Wavelengths (nm) | 1310, 1550 |
| Wavelength Tolerance | ± 20 nm |
| Spectral Width (FWHM) | 2 nm (maximum) |
| Internal Modulation | 1 kHz, 2 kHz, CW |
| Wavelength ID (one, two, or three wavelengths) | Compatible with Noyes Optical Power Meters and Light Sources |
| Output Power Stability | 0.25 dB |
| Output Power | 0 dBm |
Visual Fault Locator
| Emitter Type | Laser |
| Safety Class | Class II FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 |
| Wavelength | 650 nm |
| Output Power (nominal) | 0.8 mW into single-mode fiber |
General
| Size (in boot) | 19 x 11.2 x 4.7 cm (7.5 x 4.4 x 1.9 in) |
| Weight | 0.8 kg (1.7 lb) |
| Operational Temperature | -10 to +50°C, 0 to 95% RH (non-condensing) |
| Storage Temperature | -20 to +60°C, 0 to 95% RH (non-condensing) |
| Power | Rechargeable Li-Ion or AC adapter |
| Battery Life | 10 hours, backlight ON, continuous operation |
| Display | LCD, 320 x 240, 3.5 inch (89 mm), color, high-contrast transflective with backlight and AR coating |
For full Noyes OFL280-103 product specifications, please click here: Noyes OFL280-103
AFL NOYES OFL280-103 FlexTester SingleMode 1310/1550/1625nm OTDR w/ VFL & Power Meter
Dynamic Range:
1310 / 1550 / 1625 nm : 34 / 32 / 28 dB
Power Meter:
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm
Dual-wavelength testing at 1310 and 1550 nm is normally sufficient to certify point-to-point or FTTx (PON) networks and detect macro bends.
Includes Carrying Case & Accessories As Listed
OFL280 OFL 280 OFL-280 OFL-280-103
Noyes OFL-280-103 OFL 280-103 OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 42450-L/T*
- AFL Noyes OFL280-103 UPC FlexTester SM Fiber OTDR (BC# 42450-L/T*)
- SM OTDR Source:
- 1310nm
- 1550nm
- 1625nm
- SC Connector For Source
- Power Meter:
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm
- 2.5mm Connector For Power Meter
- Visual Fault Locator
- 2.5mm Connector For VFL
- SM OTDR Source:
- OFL-280 Quick Reference Guide
- (2) SM SC-SC Fiber Optic Cables
- (4) Fiber Wipes
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- Strap For Unit
- User Manual On CD-ROM
- Carrying Case (G)