NOYES SLP 4-6D SM 1310/1550nm Fiber Test Kit OPM 4-4D OLS 2D

Noyes SLP 4-6D SM Fiber Test Kit
The SLP 4-6D test kit combines the OPM 4-4D optical power meter and OLS 2-Dual LASER light source and is ideally suited for testing single-mode fiber optic networks. The OLS 2-Dual features 1310 nm and 1550 nm LASER output from a single output port and is easy to operate. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned.

The OPM 4-4D offers Wave ID, automatic wavelength identification and switching, when used with the OLS 2-Dual. Multiple test Tone detection is provided for fiber identification. The OPM 4-4D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status.

In addition to being powered by two AA alkaline, the OPM 4-4D or OLS 2-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4-4D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4-4D and OLS 2-Dual are fully N.I.S.T. traceable.

Features:

• Rugged, handheld, lightweight
• Designed for field use
• Certify single-mode links per TIA/EIA standards
• Wave ID - automatic wavelength identification and switching
• Dual Wave ID, single Wave ID, CW, and modulated Tone (on single-mode output)
• 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone
• Adjustable output
• Large LCD with backlight
• Power measurements in dBm or µW; insertion loss in dB
• Reference power level storage
• AA alkaline, optional rechargeable NiMH battery pack or AC Adapter
• Low battery indicator
• Cost-effective, easy to use
• N.I.S.T traceable

Specifications:

OLS 2 - Dual specifications
Output wavelength	1310 ± 20nm, 1550 ± 20nm
Output Power	0 dBm ( Adjustable 2 dB )
Laser classification	Class 1 (FDA 21 CFG 1040.10 and 1040.11, and IEC 60825-1)
Output connector	SC (FC & ST available)
Spectral width (FWHM)	5 nm (max)
Stability	± 0.05 dB over 1 hours (after 15 min. warm-up) ± 0.1 dB over 8 hours (after 15 min. warm-up)
General
Power	2 x AA batteries, optional NiMH or AC adapter
Battery life (2 x AA)	Typical 120 hours, Minimum 75 hours
Operating temperature	-10 to 50°C, 90% RH (non-condensing)
Storage temperature	-30 to 60°C, 90% RH (non-condensing)
Size (H x W x D)	5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight	0.65 lb (.29 kg)

 

OPM 4-4D specifications
Calibrated wavelengths	850, 980, 1310, 1490, 1550, 1625 nm
Detector type	Filtered InGaAs
Measurement range	+26 to -50 dBm
Tone detect range	+6 to -30 dBm +6 to -25 dBm for 850 nm
Wavelength ID range	+6 to -30 dBm +6 to -25 dBm for 850nm
Accuracy	± 0.25 dB
Resolution	0.01 dB
Measurement units	dB, dBm, µW
General
Power	2 x AA batteries, optional NiMH
Battery life (2 x AA)	300 hours with backlight [Off] 20 hours with backlight [On]
Operating temperature	-10 to 50°C, 90% RH (non-condensing)
Storage temperature	-30 to 60°C, 90% RH (non-condensing)
Size (H x W x D)	5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight	0.58 lb (0.26 kg)

For full Noyes SLP 4-6D product specifications, please click here: Noyes SLP 4-6D

NOYES SLP 4-6D Singlemode Fiber Loss Test Set
Noyes OLS2D SM 1310 / 1550nm Dual Optical Laser Source
&
Noyes OPM 4-4D Optical Power Meter

Power Meter:
- 850nm
- 980nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm

Source:
- 1310nm
- 1550nm

Includes Carrying Case & Accessories As Listed 

OPM 4-4 OLS2 OLS

Noyes SLP4-6D SLP-4-6D SM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# 41679-L/T* 41678-L/T*

• Noyes OLS2 SingleMode Dual Laser Source (BC# 41679-L/T*)
  • SM Source:
    • 1310nm
    • 1550nm
  • ST Connector For Source
• Noyes OPM 4-4D SingleMode MultiMode Optical Power Meter (BC# 41678-L/T*)
  • Power Meter:
    • 850nm
    • 980nm
    • 1310nm
    • 1490nm
    • 1550nm
    • 1625nm
  • ST Connector For Power Meter
• (2) SM ST-ST Fiber Optic Cables
• (4) Fiber Wipes
• User Manual On CD-ROM
• Carrying Case (G)

Having trouble viewing this file? Click this link to download