|
The OMNIScanner provides advanced certification for Cat 5/5e/6 cabling links
to 300 MHz using an extendible digital platform that ensures unprecedented Level
III accuracy. You can rely on the OMNIScanner to help you win any Fiber Optic
Cat 6/5e/5 bids.
OMNISCANNER is the most advanced hand-held certification and diagnostic tool
for the verification of copper links. The Category 7, 6, 5E (Enhanced), 5 and
ISO Class F, E, D, and C tester has an extended frequency range of 300 MHz.
OMNISCANNER provides full software compliance with TIA and ISO/IEC requirements
for measurement reporting and analysis (including Length, Delay, ACR, NEXT,
ELFEXT, Return Loss, Resistance, PSNEXT, PSACR, PSELFEXT and Attenuation). In
addition, OMNISCANNER measures Length, Delay, Impedance, and Resistance on
coaxial cabling.
OMNISCANNER’s graphical user interface consists of a backlit LCD display,
quick access menus, arrow keys, and descriptive menu options that guide you
through certifying or troubleshooting cabling systems. For test and
certification of twisted pair cabling, the OMNISCANNER requires the OMNIREMOTE
unit at the opposite end of the cabling link under test. OMNISCANNER
communicates with OMNIREMOTE to obtain status and perform measurements from both
ends of the link.
Features:
- Instantly pinpoint specific connection failures with S-Bands diagnostics
- Test up to 300 MHz on class F links
- Dual-fiber, dual wavelength, Multimode & Single Mode
certification with OMNIFiber Adapters
- Manufacturer-specific cable libraries pre-installed
- Easily manage and document copper and fiber links with new LinkWare
software
OMNIFiber Multimode Adapter Set
OMNIFiber is the
first fiber adapter capable of supporting measurements for both single-and
multimode fiber. OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1
& Omnscanner LT copper cable tester to transform it into a Multi-mode fiber
certification tool. Using the OMNIFiber adapter, OMNIScanner provides a
one-button "Autotest" that measures multimode length, loss and propagation delay
on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then
compares the results to the appropriate industry standard and provides a simple
PASS/FAIL indication of the tested link. With single mode fiber, OMNIScanner
measures loss on transmit and receive fibers at 1310 nm.
- Dual-fiber, dual wavelength, multimode certification with OMNIFiber
Adapters
- Easily manage and document copper and fiber links with LinkWare software
|
