Hioki 3196 kit with accessories

Hioki 3196 Three Phase Power Quality Analyzer

Hioki 3197 kit with accessories

Hioki 3197 Three Phase Power Quality Analyzer

Fluke 435 Three Phase Power Quality Analyzer Meter

$4,129.00
Availability: In stock
SKU
PQ07

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Fluke 435 Power Quality Analyzer

These three-phase power quality meters help you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use power quality tools are a â??must haveâ?? for any person who maintains or troubleshoots three phase power. The new IEC Class A standards for flicker and power quality are built right in to take the guess work out of power monitoring.

  • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools-even while background recording continues
  • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
  • Automatic Transient Mode: Capture 200 kHz waveform data on all phases simultaneously up to 6 kV
  • Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
  • Measure all three phases and neutral: With included four current probes
  • AutoTrend: Every measurement you see is always automatically recorded, without any setup
  • System-Monitor: Up to ten power quality parameters on one screen according to EN50160 power quality standard
  • Inrush mode: For troubleshooting nuisance circuit breaker tripping
  • View graphs and generate reports: With included analysis software
  • Logger function: Configure for any test condition with memory for over 400 parameters at user defined intervals
  • Mains signaling: Measure interference from ripple control signals at specific frequencies
  • Battery Life: Seven hours operating time per charge on NiMH battery pack

Applications

  • Frontline troubleshooting â?? quickly diagnose problems on-screen to get your operation back online
  • Predictive maintenance â?? detect and prevent power quality issues before they cause downtime
  • Quality of service compliance â?? validate incoming power quality at the service entrance
  • Long-term analysis â?? uncover hard-to-find or intermittent issues
  • Load studies â?? verify electrical system capacity before adding loads
  • Energy assessments â?? quantify energy consumption before and after improvements to justify energy saving devices

Features:



Power quality analyzer selection table



 
435 434*
Measures voltage, current, dips, swells, interruptions,
harmonics, inter-harmonics, flicker, power, energy,
transients, frequency, unbalance, inrush, EN50160 overview
â?¢ â?¢
Logger function with multi-parameter logging â?¢ optional*
Mains signaling â?¢ optional*
Memory size 16 MB 8 MB
Current probes 3000 A flexible
(4)
40 A/400 A
clamp (4)
Carrying case water-tight hard
case with rollers
rugged hard case
Software Fluke Power Log
and FlukeView®
FlukeView®
 
Technical Data
Inputs
Number: 4 voltage and current (3 phases + neutral)
Maximum voltage: 1000 Vrms (6 kV peak)
Maximum sampling speed: 200 kS/s on each channel simultaneously
Volt/Amps/Hertz
Vrms (AC + DC)
Measurement range: 1 ... 1000 V
Accuracy: 0.1% of Vnom
Vpeak
Measurement range: 1 ... 1400 V
Accuracy: 5% of Vnom
Crest factor, voltage
Measurement range: 1.0 ... > 2.8
Accuracy: ±5%
Arms (AC + DC)
Measurement range: 0 ... 20 kA
Accuracy: ±0.5% ± 5 counts
Apeak
Measurement range: 0 ... 5.5 kA
Accuracy: 5%
Crest factor, A
Measurement range: 1 ... 10
Accuracy: ±5%
Hz 50 Hz nominal
Measurement range: 40 ... 70 Hz
Accuracy: ±0.01 Hz
Dips and swells
Vrms (AC+DC) ²
Measurement range: 0.0% â?¦ 100% of Vnom
Accuracy: ±0.2% of nominal voltage
Arms (AC+DC) ²
Measurement range: 0 ... 20 kA ?
Accuracy: ±1% ± 5 counts
Harmonics
Harmonic (interharmonic) (n)
Measurement range: DC, 1..50; (Off, 1..49) measured according to IEC 61000-4-7
Vrms
Measurement range: 0.0 â?¦ 1000 V
Accuracy: ±0.05% of nominal voltage
Arms
Measurement range: 0.0 â?¦ 4000 mV x clamp scaling
Accuracy: ±5% ± 5 counts
Watts
Measurement range: Depends on clamp scaling and voltage
Accuracy: ±5% ± n x 2% or reading, ± 10 counts
DC voltage
Measurement range: 0.0 â?¦ 1000 V
Accuracy: ±0.2% of nominal voltage
THD
Measurement range: 0.0 â?¦ 100.0%
Accuracy: ±2.5% V and A (± 5% Watt)
Hz
Measurement range: 0 â?¦ 3500 Hz
Accuracy: ± 1 Hz
Phase angle
Measurement range: -360º ... +360º
Accuracy: ± n × 1.5º
Power and energy
Watt, VA, VAR
Measurement range: 1.0 â?¦ 20.00 MVA¹
Accuracy: ±1% ± counts
kWh, kVAh, kVARh
Measurement range: 00.00 â?¦200.0 GVAh¹
Accuracy: ± 1.5% ± 10 counts
Power Factor/ Cos ? / DPF
Measurement range: 0â?¦1
Accuracy: ± 0.03
Flicker
Pst (1 min), Pst, Plt, PF5
Measurement range: 0.00 â?¦ 20.00
Accuracy: ±5%
Unbalance
Volts
Measurement range: 0.0 â?¦ 5.0%
Accuracy: ±0.5%
Current
Measurement range: 0.0 â?¦ 20%
Accuracy: ± 1%
Transient Capture
Volts
Measurement range: ±6000 V
Accuracy: ±2.5% of Vrms
Minimum detect duration 5 µs (200kS/s sampling)
Inrush mode
Arms (AC+DC)
Measurement range: 0.000 â?¦ 20.00 kA¹
Accuracy: ±1% of meas ± 5 counts
Inrush duration (selectable)
Measurement range: 7.5 s ... 30 min
Accuracy: ±20 ms (Fnom = 50 Hz)
Autotrend recording
Sampling: 5 readings/sec continuous sampling per channel
Memory: 1800 min, max and avg points for each reading
Recording time: Up to 450 days
Zoom: Up to 12x horizontal zoom
Memory
Screens & data: 50, shared memory divided between logging, screens and data sets
Notes
¹ Depending on clamp scaling
Value is measured over 1 cycle, commencing at a fundamental zero crossing, and refreshed each half-cycle
    • Complete three-phase troubleshooting tool: measures virtually every power system parameter: voltage, current, frequency, power, power consumption (energy), unbalance and flicker, harmonics and inter-harmonics. Captures events like dips and swells, transients, interruptions and rapid voltage changes.
    • The Fluke 435 features 0.1 percent voltage accuracy making it fully compliant with the IEC 61000-4-30 Class A standard
    • Logger function: record the detail you need. Detailed, user-configurable long-time recording gives you the MIN, MAX and AVG readings of up to 100 parameters on all 4 phases with selectable averaging time down to 0.5 seconds. Enough memory is available to record 400 parameters with 1 minute resolution for up to a month.
    • Four channels: simultaneously measures voltage and current on all three phases and neutral.
    • AutoScaling: easier trend analysis with automatic scaling of the vertical axis you will always use the full display to view the waveforms.
    • Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically.
    • Meets the stringent 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance.
    • Rugged, handheld instrument operates for more than 7 hours on included rechargeable NiMH battery pack. Menu-driven interface simplifies operation.
    • Extensive data analysis possibilities. Cursors and zoom can be used â??liveâ?? while taking the measurements, or â??offlineâ?? on stored measurement data. The stored measurements can also be transferred to a PC with FlukeView software.
    • The Fluke 435 comes with Power log software to analyse recorded data and to create reports.
    • Complies with IEC 61000-4-30 measurement standards



For full Fluke 435 product specifications, please click here: Fluke 435

Fluke 435 HandHeld Three-Phase Power Quality Analyzer

Installed Options:
- Transients
- Inrush
- Interharmonics
- Energy
- Memory
- Mains Signaling
- Logger

Includes Carrying Case & Accessories As Listed

Fluke-435 Fluke435

Fluke 435 Fluke-435 Power Quality Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# 45403-L/T*

  • Fluke 435 Power Quality Analyzer (BC# 45403-L/T*)
    • Installed Options:
      • Transients
      • Inrush
      • Interharmonics
      • Energy
      • Memory
      • Mains Signaling
      • Logger
  • (4) Fluke i430 Flex Cables
  • (5) Fluke Test Leads
  • (5) Fluke Dolphin Clips
  • Fluke Optical Interface Cable
  • Fluke 435 Getting Started Guide
  • AC Adapter/Charger
  • Strap For Unit
  • User Manual On CD-ROM
  • Hard Carrying Case
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!