Rifocs 160L Fiber Optic Visual Fault Finder
$149.95
Availability:
Out of stock
SKU
4F112
Condition: Refurbished
Warranty: 90 Day Exchange
Request a Quote for
Rifocs Corp 160L Visual Fault Finder
Locating Breaks and Bending Losses
The 160L visual fault finder is an indispensable tool for quickly identifying bending losses and breaks in optical fibers. If a fiber is bent too tightly, red laser light will be seen escaping through the jacket. Likewise, if a fiber is broken, escaping light will be visible where the break is located.
Identifying Bad Ceramic Connectors
Ceramic connectors are easily tested using the 160L visual faul finder. A fiber broken inside, or past, the ferrule will cause it to glow. If the whole connector glows, it is definitely defective.
If the endface polish of the connector is bad, light will be reflected internally. This will also make the ferrule glow when the 160L is used.
Features:
For full Rifocs 160L product specifications, please click here: Rifocs 160L
Locating Breaks and Bending Losses
The 160L visual fault finder is an indispensable tool for quickly identifying bending losses and breaks in optical fibers. If a fiber is bent too tightly, red laser light will be seen escaping through the jacket. Likewise, if a fiber is broken, escaping light will be visible where the break is located.
Identifying Bad Ceramic Connectors
Ceramic connectors are easily tested using the 160L visual faul finder. A fiber broken inside, or past, the ferrule will cause it to glow. If the whole connector glows, it is definitely defective.
If the endface polish of the connector is bad, light will be reflected internally. This will also make the ferrule glow when the 160L is used.
Features:
- Simple, versatile, and user-friendly design
- Rugged, compact, and splashproof aluminum housing
- High output 1.0mW (0dBm) 635nm red laser
- Up to 3km range
- Continous wave output mode for steady fault illumination
- Blinking output mode increases viewing contrast
- Easy to use "Quick Connect" interface fits all 2.5mm fiber optic connectors
- Ergonomic rotary switch permits easy one-handed operation
- Two AA-size alkaline batteries provide 48 hours of continous operation
| Light source type | 635nm red laser diode and monitor with multi-quantum well structure |
| Center wavelength | Nominal: 635nm Range (Typical): 630nm to 640nm |
| Spectral width (FWHM) | < 2nm |
| Typical output power | Max. into SMF-28 fiber: 1.0mW (0dBm) Min., CW output mode: 316µW (5dBm) |
| Blink frequency in MOD Mode | <3Hz (approximate) |
| Power requirements | Two AA-size 1.5V alkaline batteries |
| Battery life | Approx. 48 hours of continous operation |
| Connector interface | Standard "Quick Connect" universal 2.5mm receptacle |
| Environmental | Operating Temp.: -10°C to +50°C Storage Temp.: -40°C to +60°C |
| Humidity | 0 to 95% RH, non-condensing |
| Dimensions | Length: 22.9 cm (9.0 in.) Diameter: 2.54 cm (1 in.) |
| Weight | 200g (7 oz) with batteries & nylon belt holster |
| CDRH laser class | Class IIIa |
| CE | IEC 801-2 portion of the EN50082-1 ESD immunity requirement |
For full Rifocs 160L product specifications, please click here: Rifocs 160L
Rifocs Corp 160L Visual Fault Finder
The 160L visual fault finder is an indispensable tool for quickly identifying bending losses and breaks in optical fibers
Continous wave output mode for steady fault illumination
Rifocs 160L 160-L Fiber Optic Visual Fault Finder Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 17083M
- Rifocs Corp 160L Visual Fault Finder (BC# 17083M)