|
The 1205CXA provides the CATV field technician with unparalled fault finding
capability. With a sub-ns pulse, a rugged and robust package and full PC
connectivity, the 1205CXA offers industry leading performance as well as having
the Riserbond ease of use functionality. It is intuitive and easy to use and
meets the users needs both in performance and in use. It has advanced features
such as a sub-ns pulse and auto fault find and is housed in a field proven
rugged and robust enclosure. The 1205CXA is complete fault finding package for
the CATV field engineer.
Key features
- Sub-ns pulse.
- Rugged and robust.
- Ease of use.
- PC connectivity.
- Range Plus.
- Super Store.
- Auto fault find.
- dBRL.
- RANGE-PLUS - Two-button operation that allows the
operator to quickly scan the cable under test while automatically stepping
through a specific pulse width, vertical gain, and cable length.
- Sub-nanosecond Pulse Width - Pinpoint minor faults which
interrupt digital services and cause signal loss, ingress, and egress.
- Intermittent Fault Detection (IFD) - Monitor and locate
hard-to-find intermittent faults using the IFD mode.
- Dual Independent Cursors - Measure between any two points
on the waveform.
- SUPER-STORE Waveform Data Storage - Helps reduce downtime
in a system. Simply connect the TDR, press “store”, and have the system back
up and running within minutes. Analyze the waveform later.
- WAVE-VIEW Software - Upload waveforms to your computer.
Document before accepting new plant, save money when comparing replacement
versus repair cost.
- Rugged, waterproof packaging - Rugged, weatherproof
casing helps keep the 1205CXA on the job, regardless of location or climate
conditions.
| Physical
Dimensions: |
| Width: |
10.5 inches (267 mm) |
| Height: |
9.75 inches (247.6 mm) |
| Depth: |
5 inches (127 mm) |
| Weight: |
6 pounds (2.7 kg) |
| Power: |
| Battery: |
Internal, rechargeable, 7.2 V Nickel
metal hydride |
| Charging Source: |
External 12 VAC transformer, 1.3
A |
| Operating Time: |
Greater than 6 hours, continuous
without backlight |
| Environment: |
| Operating temperature: |
0° C (+32° F) to +50° C (+122°
F) |
| Typical temperature: |
-15° C (+5° F) to +60° C (+140°
F) |
| Storage temperature: |
-20° C (-4° F) to +60° C (+140°
F) |
| Humidity: |
95% maximum relative humidity,
non-condensing |
| Display: |
| 320 x 240 dot-matrix, liquid crystal
display (LCD) with cathode fluorescent (CFL) backlighting |
| Maximum
Ranges: |
| 63,700 feet (19,400 meters) at .990
VOP |
| 51,500 feet (15,500 meters at .800
VOP |
| Range varies with VOP. Maximum testable
cable length varies with pulse width and cable
type. |
| Horizontal
Resolution: |
| Up to 2,000 ft (610 m):
|
<.05 ft (.03 m) at .990
VOP |
| <.02 ft (.01 m) at .300
VOP |
| Over 2,000 ft (610 m) |
1 ft. (.1 m) at any VOP |
| Vertical Resolution: |
14 bits with 170 dots
displayed |
| Vertical Sensitivity: |
Greater than 65 dB |
| Output Connector: |
Front panel Female BNC |
| Input
Protection: |
| 400 volts (AC + DC) from DC to 400 Hz
and decreases to 10 volts at 1 MHz. |
| Distance
Accuracy: |
| Accuracy will vary with
cable VOP and cable type. |
| +/-.1 ft (.03 m) plus
+/-.01% of reading |
| Serial I/O Port: |
RS-232 |
| Output Pulses: |
Selectable output pulse
widths |
| Auto dBRL: |
2 digit auto return loss calculation
at cursor setting |
| Waveform Storage: |
Each with full vertical
resolution |
| Standard: |
8 waveforms |
| Optional: |
32 waveforms |
| Automatic/Manual Noise
Filter: |
| Standard: |
Two averaging filters |
| Optional: |
Multi-function/Multi-level
filtering |
|
