|
Physical Dimensions:
Height: 10.5 inches
Width: 9.75 inches
Depth: 5 inches
Weight: 8 pounds
Power: Lead Acid or NiCad battery pack
12VAC, 1A (minimum) charger.
Charger: 110V
Environment:
Operating temperature:
+32 deg F (0 C) to +122 deg F (+50 C)
Typical temperature:
5 deg F
(-20 C) to +140 deg F (+60 C)
Storage temperature:
-4 deg F (-20 C) to +140 deg F (+60 C)
Humidity: 95% maximum relative humidity,
non-condensing.
Display:
128 x 256 dot matrix liquid crystal
display
(LCD) with electroluminescent backlighting.
Horizontal Resolution:
<2000 ft: < .25
ft at .99 VOP, <.07 ft at .30 VOP
>2000 ft: 1 ft at any VOP
Vertical Resolution:
14 bits with 93 dots
displayed.
Output Pulse:
Adjustable pulse widths of 2,
10, 100, 1000, 2000,
and 4000 nsec.
Maximum Range:
63,700 ft at .99 VOP, 38,600
ft at .60 VOP
Maximum testable cable length will vary with
pulse
width and cable type. |
Vertical Sensitivity: Greater than 65 dB.
Distance Accuracy: +/- 0.5 ft plus +/- .01%
of reading.
Accuracy will vary with VOP and cable type.
Input Protection:
400 volts (AC + DC) from
DC to 400 Hz and
decreases to 10 volts at 1 MHz
Output Impedance:
Front panel selection of
125, 93, 75 and 50 ohm,
+/- 5%.
Auto dBRL: 2 digit auto dBRL calculation at cursor
set.
Velocity of Propagation:
Keypad selection
from .300 to .999 in .001
or .01 increments.
Waveform Storage:
Standard: 4 at 12,000
samples/waveform
8 at 6,000 samples/waveform
16 at 3,000
samples/waveform
Optional: 16 at
12,000 samples/waveform
32 at 6,000 samples/waveform
64 at 3,000
samples/waveform
Automatic/Manual Noise Filter:
Standard: Two
averaging filters.
Optional:
Multi-function/level filter routines.
Output Connector: Front panel female BNC.
Serial I/O Port: RS-232.
CE
CERTIFIED |
