Tektronix OTS91R2 module angled

Tektronix OTS91R2 OC192/STM64 Receiver Module

Wirescope 155 Channel adapter bottom face up

Wirescope 155 Cat5e Channel Adapter

Siecor Corning M90 4000 Series Fusion Splicer

$0.00
Availability: Out of stock
SKU
2D26

Condition: Refurbished / Calibrated

Warranty: 90 Day Exchange

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

Fiber Diameters
Single-mode fibers, dispersion-shifted single-mode fibers and multimode fibers with coating diameters of up to 900 um can be fused. The splicer is designed for use with the standard 125 um outside fiber diameter (without coating). If you need to splice fibers with other diameters, please contact the manufacturer.

Automatic Fiber Positioning
Fiber positioning and the fusion process run automatically. This assures uniform high quality results independent of the operator. Two mutually independent processes for positioning and automatic splice loss determination have been integrated into the splicer. The time tested LID system (Local Injection and Detection) allows for accurate core-to-core positioning of the fiber ends such that good splicing results can even be achieved with singlemode fibers with eccentric cores. It also allows for the measurement of splice loss at an operational wavelength of 1300 nm. If the LID system cannot be used (e.g. with tight-buffered fibers), the completed splice is analyzed with the L-PAS -video system (Lens Profile Alignment System), and splice loss is indicated in dB as well.

Fiber Requirements: Single and multimode glass fiber with 125 um glass diameter, 250 to 900 um coating diameters
Fiber Display: High contrast 5.5" color LCD
Magnification: Approximately 100 power
Fiber Positioning: Fully automatic in X, Y and Z axes
Mean Splice Loss for Identical, Standard Single-Mode Fibers:
         Multimode fiber: typ. < 0.01 dB
         Standard single-mode fiber: typ. < 0.02 dB
Tensile Test: Automatic / OFF
Splicing Programs: Preset, special and user programs
Video Output: CCIR output (75 ohm)
Mains Power: 95 to 260 V with automatic voltage range selection, 50 - 60 Hz, max 100 VA
External 12 V Power Supply: 12 - 14.5 V, max. 5 A, pole reversal protected
Data Memory Capacity: 1000 splice values
Data Output: RS 232 interface with adjustable baud rate
LID System: Wavelength: 1300 nm, temperature compensated
Attenuation Splices: 1 to 10 dB (in steps of 0.1 dB)
Real-Time Clock: Time and date display with battery backup
Operating Temperature: -5° C to +45° C
Storage Temperature: -20° C to +70° C

Siecor Corning M90 4000 Series Core Alignment Singlemode Multimode LID-SYSTEM Fusion Splicer

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs

Includes Siecor FBC-005 High Precision Fiber Cleaver, Integrated Hard Case & Accessories As Listed

M 90 4000 M-90

Siecor M90 4000 M-90 4000 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 25404

  • Siecor M90 4000 Series Fusion Splicer (BC# 25404)
  • Siecor FBC-005 High Precision Fiber Cleaver (Attached To Unit)
  • Clauss CFS-02 Fiber Optic Stripper
  • 6 Month Fusion Splicer Care Kit FS6MC:
    • 4oz Flip Jar Of 99% Alcohol
    • (50) Non-Lint Dry Wipes
    • (6) Fiber Optic Wipes w/ 99% Alcohol
    • 2oz Pump Fast Evaporating Mirror Spray
    • (25) Camera Swabs
    • (25) V-Groove Swabs
  • 125/900 Fiber Holder Set
  • 250 Fiber Holder Set
  • Work Lamp
  • Assorted Tool Kit
  • Power Cord
  • RS232 PC Interface Cable
  • User Manual On CD-ROM
  • Integrated Hard Case