|
Features:
- Core Alignment (High-Resolution Direct Core Monitoring)
- On Board Splice Protection Heater
- 5.6” Color LCD Monitor
- 340x Fiber Magnification
- 30 mph Wind Protection
- User Friendly Software With Help Features
- Operation By AC Power or 12V Li-ion Battery
- Tool-free Maintenance for Changing Electrodes
- Back mount Monitor Option Available
- Fast Fiber Protection Sleeve Heater
The Type-37SE Micro-CoreTM is a lightweight, portable, fully automatic, self-contained instrument for creating low-loss optical fiber splices. This full-featured splicer features a user-friendly software package with on-screen operation instructions that help simplify training requirements. It is highly portable at only 9.0 lbs and can receive power via an internal AC power module or internal 12V DC battery module.
The splicer automatically aligns a pair of optical fibers in both the X and Y (horizontal and vertical) planes and then fuses them together with heat from an electric arc to form a low-loss splice. HDCM (High-resolution Direct Core Monitoring) image processing software in the splicer is used to perform core alignment and estimates the splice loss. The operation can be performed in as little as 11 seconds with a typical splice loss of 0.02 decibels(dB) for identical single-mode fibers.
Specifications
| Alignment Method |
Core Alignment — High-resolution
Direct Core Monitoring (HDCM) |
| Fiber Requirement |
Silica Glass |
| Profile Type |
SMF, MMF, NZ-DSF, CSF, Er-doped Fiber |
| Cladding Diameter |
80 to 150ěm |
| Coating Diameter |
250 to 900ěm |
| Cleave Length |
8 to 16mm |
| Typical Splice Loss, Identical Fibers |
SMF: 0.02dB
MMF: 0.01dB
NZ-DSF: 0.03dB |
| Number of Fusion Condition Settings |
48 Total |
| Splice Parameters |
5 Adjustable Parameters |
| Number of Fiber Profiles |
40 |
| Arc Test Compensation |
Automatic |
| Number of Heater Condition Settings |
10 |
| Menu Selection |
User Friendly Menus |
| Typical Splice Cycle Time |
11 Seconds, Quick Mode,
15 Seconds, Standard
(Set to Loss Estimation) |
| Typical Heater Cycle Time |
<40 Seconds |
| Proof Test |
Standard, 200 Grams (0.44 lb) |
| Splice Data Storage |
2400 Splices (Built-in Memory) |
|
