|
The Type 45S Micro-Single is an economical means for creating automatic,
low-loss optical fiber fusion splices offering superb splicing portability. The
front-to-back workflow is ideal for splicing in confined areas such as aerial or
taut-sheath applications.
The Type-45S typically requires less than 20
seconds to make an automatic fusion splice, and the average splice loss for
identical single mode fibers is 0.05 decibels (dB). The Type-45S is equipped
with an on-board splice protection heater that is used to heat shrink a fiber
protection sleeve over a completed splice. A 60mm fiber protection sleeve can be
fully shrunk in less than 75 seconds.
Features:
- Both power sources, AC adapter and battery, are available.
- The portable capability of the T-45S has been improvedusing the slot-in AC
adapter/battery.
- Fiber loading without fiber holder.
- Newly developed FFES optical system provides highspeed splicing and clear
fiber image, which allows visualcheck. (FFES-Full fiber in Focus in Equal
Size)
- Newly developed heater is capable of high speed heatingoperation.
- 40 consecutive splicing/heating operation with one fullycharge battery.
- The mounting of a large wind protector enables splicingoperation in 15m/s
strong wind.
- 5.6 inch large TFT color monitor provides clear fiber imageeven in direct
sunlight.
- Protection glass attached to mirror gives you much easiercleaning and
maintenance.
- White LED illumination enables identification of a ribboncolor and fiber
loading even at dark places.
- Automatic arc test insures an optimum arc is achievedfor various
environmental conditions, as well as splicingdifferent manufactures
fiber.
Specifications
| Alignment Method |
Fixed V-Groove |
| Fiber Requirement |
Silica Glass |
| Profile Type |
SMF, MMF and NZ-DSF |
| Cladding Diameter |
125µm |
| Coating Diameter |
250 to 900µm |
| Typical Splice Loss, Identical Fibers |
SMF: 0.05dB
MMF: 0.03dB
NZ-DSF: 0.07dB |
| Number of Fusion Condition Settings |
48 Programs |
| Splice Parameters |
7 Adjustable Parameters |
| Arc Test Compensation |
Automatic |
| Number of Heater Condition Settings |
10 |
| Typical Splice Cycle Time |
20 Seconds (Set to Loss Estimation) |
| Proof Test |
Standard, 200 Grams (0.44 lb) |
| Splice Data Storage |
500 Splices |
On-board Splice Protection Heater
5.6” Color LCD Monitor
User Friendly
Software With Help Features
Operation by AC Power or 12V Li-ion Battery
Tool-free Maintenance for Changing Electrodes
|
