|
Sumitomo Micro Mass Type-65M12 Fusion Splicer The Type-65 sets a new standard for reduced size and weight, and is designed for complete portability. Battery operated, the splicer allows more than 20 splices per battery charge including heater operation. With 30 mph wind protection and a compact size, it can splice in any environment.
Utilizing precision v-groove alignment, the Type-65 can be used for all types of ribbon and single splicing with an optimum arrangement for ease of use in aerial and taut-sheath applications. A newly developed fiber viewing system simultaneously focuses up to 12 fibers at a time and maintains equal size and resolution across all fibers for improved accuracy of splice loss estimations. The high-speed, high-resolution image processing system automatically evaluates the fibers in two planes (X and Y-axis) for cleave end face quality, cleave length irregularity, and fiber offset to screen out the most likely causes in high loss splices. The Type-65 also has programmable power management functions for longer battery operation, a large color monitor, one of the fastest built-in fiber protection sleeve heaters available, and ultra-fast 30 second mass splicing!
Features:
- Compact, Lightweight Design and Front to Back Work Flow System Simplifies Splicing in Confined Areas (i.e. Aerial, Taught-Sheath)
- Simultaneous Focusing on Up to 12 Fibers at a Time
- 5.6" Color LCD Display With On-Screen Guide and Brightness Control Eases Operation in a Field Environment
- Lower Power Consumption with Built-In Power Management Allows 20+ Splices, Including Heater Operation, on a Charged Battery
- Automatic Splice and Loss Estimationin 30 Seconds for 12 Count Ribbon Fiber
Specifications
| Alignment Method |
Fixed V-Groove |
| Fiber Type |
SMF/MMF/NZ-DSF |
| Coating Diameter |
Ribbon: 250µm Single: 250 & 900µm. |
| Number Of Fibers |
1 - 12 |
| Typical Splice Loss Identical Fibers |
SMF: 0.05dB MMF: 0.03dB NZ-DSF: 0.07dB |
| Number Of Fusion Condition Settings |
3 Fiber Profiles With 7 Pre-set Programs Each. Maximum Of 48 Programs. |
| Splice Parameters |
5 Parameters For Each Program |
| Arc Test Compensation |
Automatic |
| No. Of Heater Condition Settings |
10 |
| Typical Splice Cycle Time |
12 Fibers: 30 Seconds(Set To Loss Estimation) |
| Splice Data Storage |
250 Splice Data Points |
| Size |
150W x 150H x 150D mm(5.9W x 5.9H x 5.9D Inch) |
| Weight |
3 kg (6.6 lb) |
| Power Requirement |
Input: 100 - 240V AC 50/60Hz 12V DC |
| Display |
Low Glare 5.6 Inch Color LCD Monitor |
| Wind Protection |
30 mph (15 m/s) |
| Battery Operation |
20+ 12- Fiber Mass Splices Including Protection Sleeve Heater & Thermal Jacket Remover Operation |
Tektronix TFS3031 TekRanger2
Features & Benefits
- One-button Fully Automatic IntelliTrace Fiber Analysis
- Singlemode Distance and Loss Measurements Traceable to NIST
- Large, Backlit, High-resolution Display
- Keyboard Port and Optional Mini-keyboard
- RS-232 and Parallel Ports for Printing and PC Access
- Shock, Water and Dust Resistant
- Auto Echo Detection
- Selectable Splice Loss and Reflectance Thresholds
- Files are Compatible with FiberMaster™ OTDR, TARGET1™, PC Spreadsheets
- Context Sensitive Help
Applications
- Installation and Acceptance Testing of Fiber Optic Networks
- Fiber Optic System Maintenance Testing
- Locating Optical Cable Faults During Restoration
- Optical System Documentation
TekRanger 2 TFS3031
If your job is to install, maintain or restore optical fiber, the TekRanger 2 TFS3031 mini-OTDR with IntelliTrace™ Automated Fiber Analysis System is a rugged, easy-to-use, mini-optical time domain reflectometer (OTDR) that's built for you. It's designed to stand the rigors of field work, while providing precise measurements on singlemode optical fiber systems in an economical form factor.
The IntelliTrace System Advantage
IntelliTrace technology automatically adjusts and optimizes test parameters so you don't have to. Just press the Start/Stop button and it will provide the best possible resolution, while maximizing dynamic range to give you the most accurate measurements available in a mini-OTDR today. One IntelliTraceFilter acquisition provides consistent, repeatable and accurate results. The location, reflectance and loss of every splice appears quickly and clearly on the large, high-contrast display.
The TFS3031 is the only mini-OTDR that can locate an event at 10 meters while also finding an end at 70 km away with the push of a single button. No need for multiple acquisitions to get a complete picture of your fiber, either with a displayed trace or an event table. You get greater productivity in labor with less training.
Traceable Measurements
The TekRanger 2 TFS3031 offers traceability on distance and loss measurements. This means that both the hardware and the software are included in our accuracy specifications. What this means to you is that you can count on the TFS3031 mini-OTDR to provide the most reliable and repeatable measurements of any OTDR in the world.
Convenient Data Storage
Test results can be stored in the TFS3031's ample internal memory or collected on the optional floppy disk drive. Microsoft Windows based TARGET1 software package gives you virtually unlimited flexibility when analyzing and documenting your spliced fibers.
Easy System Software Updates
The TFS3031's optional disk drive and RS-232 port permit updating of the unit's firmware in the field so you can easily keep up with the latest technology.
Specifications
Wavelengths
1310 nm ±20 nm, singlemode
1550 nm ±20 nm, singlemode
Dynamic Range*1
|
|
Dynamic Range |
|
|
|
1310/1550 nm |
30/28 dB |
Readout Resolution -
25 cm minimum.
Loss threshold: 0.02 dB.
Loss resolution: 0.001 dB.
Distance Measurements - Meters, feet, miles.
OTDR Distance Range Settings - Singlemode: 1 to 240 km.
Distance Resolution (IntelliTrace™) - 1.25 m to 40 m.
Hardware Scale Accuracy*3 -
Horizontal Time Base: ±1.25 m ±1.25 m ± 10-5 x distance.
Vertical Linearity: 0.02 dB/dB.
System Measurement Accuracy*4 -
Distance: ±4 m.
Loss: ±0.01 dB.
Reflectance Accuracy - Exceeds Bellcore GR-196-CORE*2.
Measurement Time (Auto) - Less than 3 minutes (20 dB loss).
Dead Zone*2
|
|
Event |
Loss Measurement |
|
|
|
|
Singlemode |
5 m |
15 m |
Display - High resolution 640 x 480; 7.2 in., high contrast; operator switchable backlight.
Selectable Pulse Widths - 1 m, 5 m, 10 m, 20 m, 50 m, 100 m, 200 m, 500 m, 1000 m, 2000 m.
Memory Capacity -
100 traces in internal memory (typical).
3.5 in. floppy disk drive (optional).
Output Ports - RS-232 serial; Centronics parallel printer, mini-DIN (keyboard).
Power Options - AC (100 to 240 V, 50 to 60 Hz). DC Operation: 9 to 16 VDC. Internal NiCad rechargeable battery (4 hours of operation depending on operating mode).
Laser Safety -
Class 1 per 21 CFR 1040.
Class 1 per CEI/IEC 825-1: 1993.
Options 3T, 4T and 7T are Class 1.
Option 6T is Class 2.
Environmental (without internal disk drive)
Temperature Range -
Operating: -10 °C to +40 °C.
Nonoperating: -20 °C to +60 °C.
Storage Temperature - -20 °C to +60 °C.
Relative Humidity - 5% to 95% (noncondensing).
Field Usage*2 - Shock, water and dust resistant.
Shock*2 - 30 in. drop.
Safety - UL 3111-1, CSA 1010.1.
Physical Characteristics
|
Dimensions |
cm |
in. |
|
Weight |
kg |
lbs. |
|
Width |
29.2 |
11.5 |
|
Height |
11.4 |
4.5 |
|
Depth |
24.1 |
9.5 |
|
Net |
4.2 |
9.2 |
*1 Typical performance @ 25 °C.
*2 Per Bellcore GR-196-CORE.
*3 Excludes uncertainty in fiber IR and cabling factor.
*4 Verified on NIST traceable calibration system, singlemode options only.
| 
