Sumitomo Type-37 Micro-Core Fusion Splicer
$1,259.00
Availability:
Out of stock
SKU
2D15
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Request a Quote for
Sumitomo Type-37 Fusion Splicer
The Type-37 Micro-Core splicer features the smallest foot print size in the world and is one of the lightest and fastest core alignment fusion splicers available today. The splicer's 75-second reinforcement sleeve heater cycle time is the lowest in the industry. A portable, fully-automatic, self-contained instrument for creating low-loss optical fiber splices in both field and factory environments, it is designed to work with virtually all fiber types including single-mode, multimode, dispersion shifted, and other specialty fiber.
The splicer automatically aligns a pair of optical fibers in both the X and Y (horizontal and vertical) planes and then fuses them together with heat from an electric arc to form a low-loss splice. HDCM (High-resolution Direct Core Monitoring) image processing software in the splicer is used to perform core alignment and estimates the splice loss. The operation requires less than 18 seconds, and the average splice loss is 0.02 decibels (dB) for identical single-mode fibers.
Features:
Specifications:
The Type-37 Micro-Core splicer features the smallest foot print size in the world and is one of the lightest and fastest core alignment fusion splicers available today. The splicer's 75-second reinforcement sleeve heater cycle time is the lowest in the industry. A portable, fully-automatic, self-contained instrument for creating low-loss optical fiber splices in both field and factory environments, it is designed to work with virtually all fiber types including single-mode, multimode, dispersion shifted, and other specialty fiber.
The splicer automatically aligns a pair of optical fibers in both the X and Y (horizontal and vertical) planes and then fuses them together with heat from an electric arc to form a low-loss splice. HDCM (High-resolution Direct Core Monitoring) image processing software in the splicer is used to perform core alignment and estimates the splice loss. The operation requires less than 18 seconds, and the average splice loss is 0.02 decibels (dB) for identical single-mode fibers.
Features:
- Auto fiber profiling check and detection system (APDS) prevents miss-selection of fiber types.
- Compact and light weight (40% reduction in weight, compared to T-36)
- Automatic arc test insures an optimum arc is achieved for various environmental conditions, as well as splicing different manufactures fiber
- Newly developed FFES optical system provides high speed splicing and clear fiber image, which allows visual check. (FFES-Full fiber in Focus in Equal Size)
- Newly developed heater is capable of high speed heating operation
- White LED illumination enables identification of a ribbon color and fiber loading even at dark places.
- 5.6 inch large TFT color monitor provides clear fiber image even in direct sunlight
- Protection glass attached to mirror gives you much easier cleaning and maintenance.
- 40 consecutive splicing/heating operation with one fully charge battery
Specifications:
| Applicable fiber | |
| Material | Silica glass |
| Fiber type | SMF, MMF, DSF, NZDSF, CSF, Er-doped Fiber |
| Fiber diameter | 80 - 150 µm |
| Coating diameter | 250 - 900 µm |
| Fiber Count | Single Fiber |
| Cleave Length | 9 - 16 mm |
| Size and Weight | |
| Size | 150W X 150D X 176H mm, (5.9W X 5.9D X 6.9H inches) |
| Weight | 4 Kg (8.8lb) |
| Display | Adjustable 5.6ﾔ Color LCD monitor |
| Power Source | |
| AC | 100 to 240V 50/60 Hz |
| DC | 12V |
| Battery Type | NiMH (40+ splices including heat cycles) |
| Environmental Conditions | |
| Operation Temperature | 0° to 40°C (32° to 104°F) |
| Operation Humidity | 95% RH Non-Condensing |
| Storage Temperature | -40° to 60°C (-40° to 140°F) |
| Altitude | 0-3660 meters (12,000ft.) |
| Standard Performance | |
| Typical Splice Loss (Identical Fibers) | SMF: 0.02 dB MMF: 0.01 dB DSF: 0.05 dB |
| Splice Cycle Time | 18 Seconds |
| Heater Cycle Time | 75 Seconds |
| Splice Data Storage | 750 Splices |
| External Terminals | |
| Data Communications | 9 Pin D-Sub Connector RS-232C |
| 12 VDC Output | Accessories |
| Video Output | RCA Jack ﾖ Video Signal |
| Programs | |
| Fusion Condition Settings | 48 Maximum (10 Fiber Categories with program selections) |
| Fusion Parameters | 7 Adjustable Parameters |
Sumitomo Type-37 Micro-Core Singlemode & Multimode Core Alignment Fusion Splicer
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
Includes Hard Carrying Case & Accessories As Listed
Type37 Type 37
Sumitomo Type-37 Type37 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 37750-L/T*
- Sumitomo Type-37 Micro-Core Fiber Fusion Splicer (BC# 37750-L/T*)
- Clauss CFS-02 Fiber Optic Strippers
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- Sumitomo JR-22 Jacket Remover
- Sumitomo PS-65 AC Adapter
- Sumitomo V-Groove Brush
- Sumitomo BU-65 Battery Pack
- Battery Charge Cable
- Protective Screen Cover
- Power Cord
- Hard Copy User Manual
- Hard Carrying Case (G)
Related Products
Check items to add to the cart
