Sumitomo Micro Mass Type-65M12 Fiber Fusion Splicer
Sumitomo FC-6M High Precision Fiber Cleaver with:
Soft Case
Attachable Fiber Waste Container
Sumitomo JR-5 Hot Jacket Remover w/ DC Power Cord
Clauss CFS-2 Fiber Optic Stripper
RHS-12 Ribbon Fiber Holder Set
250 Single Fiber Holder Set
900 Single Fiber Holder Set
6 Month Fusion Splicer Care Kit FS6MC:
4oz Flip Jar Of 99% Alcohol
(50) Non-Lint Dry Wipes
(6) Fiber Optic Wipes w/ 99% Alcohol
2oz Pump Fast Evaporating Mirror Spray
(25) Camera Swabs
(25) V-Groove Swabs
Protective Screen Cover
Spare Electrode Set
Cooling Tray
Sumitomo BU-65 Battery Pack
Sumitomo PS-65 AC Adaptor/Battery Charger
Battery Charger Cable
Power Cord
RS232 PC Interface Cable
User Manual On CD-ROM
Hard Carrying Case
The Type-65 sets a new standard for reduced size and weight, and is
designed for complete portability. Battery operated, the splicer allows more
than 20 splices per battery charge including heater operation. With 30 mph wind
protection and a compact size, it can splice in any environment.
Utilizing precision v-groove alignment, the Type-65 can be used for all types of
ribbon and single splicing with an optimum arrangement for ease of use in aerial
and taut-sheath applications. A newly developed fiber viewing system
simultaneously focuses up to 12 fibers at a time and maintains equal size and
resolution across all fibers for improved accuracy of splice loss estimations.
The high-speed, high-resolution image processing system automatically evaluates
the fibers in two planes (X and Y-axis) for cleave end face quality, cleave
length irregularity, and fiber offset to screen out the most likely causes in
high loss splices. The Type-65 also has programmable power management functions
for longer battery operation, a large color monitor, one of the fastest built-in
fiber protection sleeve heaters available, and ultra-fast 30 second mass
splicing!
Features:
Compact, Lightweight Design and Front to Back Work Flow System Simplifies
Splicing in Confined Areas (i.e. Aerial, Taught-Sheath)
Simultaneous Focusing on Up to 12 Fibers at a Time
5.6" Color LCD Display With On-Screen Guide and Brightness Control Eases
Operation in a Field Environment
Lower Power Consumption with Built-In Power Management Allows 20+ Splices,
Including Heater Operation, on a Charged Battery
Automatic Splice and Loss Estimationin 30 Seconds for 12 Count Ribbon
Fiber
Specifications
Alignment
Method
Fixed V-Groove
Fiber Type
SMF/MMF/NZ-DSF
Coating
Diameter
Ribbon: 250µm Single: 250 &
900µm.
Number Of
Fibers
1 - 12
Typical Splice Loss
Identical Fibers
SMF: 0.05dB MMF: 0.03dB NZ-DSF:
0.07dB
Number Of Fusion
Condition Settings
3 Fiber Profiles With 7 Pre-set
Programs Each. Maximum Of 48 Programs.
Splice
Parameters
5 Parameters For Each Program
Arc Test
Compensation
Automatic
No. Of Heater Condition
Settings
10
Typical Splice Cycle
Time
12 Fibers: 30 Seconds(Set To Loss
Estimation)
Splice Data
Storage
250 Splice Data Points
Size
150W x 150H x 150D mm(5.9W x 5.9H x
5.9D Inch)
Weight
3 kg (6.6 lb)
Power
Requirement
Input: 100 - 240V AC 50/60Hz 12V
DC
Display
Low Glare 5.6 Inch Color LCD
Monitor
Wind
Protection
30 mph (15 m/s)
Battery
Operation
20+ 12- Fiber Mass Splices Including
Protection Sleeve Heater & Thermal Jacket Remover
Operation
