The standard consumable kit, TKT-ANAEROBIC2 (AC 286318), allows to installation and polishin of multimode and singlemode all-ceramic anaerobic connectors as well as the anaerobic GIC connectors.
Corning Cable Systems' Anaerobic Connector installation tool kits are designed with the installer in mind. Conveniently packaged in an easy-to-carry ballistic nylon bag, the tool kits are compact and easy to carry around the job site.
The standard consumable kit, TKT-ANAEROBIC2 (AC 286318), allows to installation and polishin of multimode and singlemode all-ceramic anaerobic connectors as well as the anaerobic GIC connectors. All connectors can be polished with this kit; LC, SC, FC and ST-compatible.
The anaerobic epoxy uses a two-part component process: * The adhesive is first injected in the ferrule * The fiber is then dipped into the primer and inserted into the connector. Curing of the epoxy takes one minute without the use of lamps or oven.
Features & Benefits
* Fast cure anaerobic adhesive; does not require electrical power, lamps or oven * Installs without index matching gel * Minimal tools required * Hand polish; doesn't require polishing machine * Low material cost * The Glass-In-Ceramic (GIC) ferrule allows easy polishing with high yield reducing the installation time (less than 3 minutes to assemble and polish) * Average insertion loss of 0.2 dB with physical contact polish
Accessories * (1) Scissors * (1) Tweezers * (2) Anaerobic Adhesive * (2) Anaerobic Primer * (1) Compressed Air Can * (1) Permanant Marker * (1) Strip Length Card for ST/SC/FC Fiber * (1) Strip Length Card for LC Fiber * (1) Fiber Stripping Tool * (1) 302 um No-Nik Stripper * (1) Jacket Stripper * (1) Ruby Fiber Scribe * (12) Alcohol Pads * (1) Corning Fiber Scope * (1) FMA-U12 Universal Fiber Adapter for Fiber Scope * (1) Soft Case for Fiber Scope * (2) Work Surfaces * (2) Precision Rubber Pads (5MM x 5" Disk) * Assorted Emery Paper * (1) Package 863X Lapping Film * Manual for Tool Kit * Hanging Strap for Carrying Case * Canvas Carrying Case