1Q07 - Panduit Fiber Optic Repair & Termination Tool Kit

This kit is used for the termination of Opti-Jack fiber optic connectors.

Singlemode

Fiber cable types: 3.0mm jacketed or 900µm buffered, works with 9/125µm fiber
Ferrule type:	Ceramic (Zirconia)
Insertion loss:	Less than 0.3dB typical
Return loss:	Greater than 40dB

Multimode

Fiber cable types:	3.0mm jacketed or 900µm buffered, works with 62.5/125µm or 50/125µm multimode
Ferrule type:	Ceramic (Zirconia)
Insertion loss:	0.1dB typical
Return loss:	Greater than 20dB

Half the size of standard connectors	Double the port density in outlets and telecommunication closets
Proven 2.5mm ferrules	Uses standard termination tools and procedures
Robust design	Protects fibers from mechanical and environmental stress
Non-optical disconnect	Maintains data transmission under tensile load
RJ-45 form factor	Familiar to end-users, snaps into all MINI-COM ® outlets and modular patch panels
Field terminable plug and jack	Allows flexibility to assemble special length patch cords on site
Adapterless	Fewer components to order and inventory
Flush mount	Unused ports do not protrude from the wall, able to be used with shuttered faceplates
TIA Standardization	FOCIS-6 interface approved at the TIA, required for EIA/ TIA-568B document

Includes:

- Panduit FCRP4 Contour Crimp Tool  
- Clauss No-Nik 203µm Fiber Optic Stripper  
- Panduit 100x Illuminated Microscope  
- Panduit PAN RFPP1 Polishing Paper 1 Micron  
- Panduit PAN RFPP5 Polishing Paper 5 Micron   
- Panduit PN78C Stripping Template  
- Panduit No-FST Broken Fiber Cleaning Up Strips  
- Panduit FJPMR Primer  
- Panduit Optijack Fiber Optic Connector Instructions  
- H2O Wash Bottle  
- Alcohol Wash Bottle Fine-Tip Marker  
- 7 Syringes With Tips  
- Working Surface  
- Panduit FJPKGU  
- Carbide Fiber Scriber  
- Tech Spray Techclean Absorb Wipes  
- P-FlatTip Cotton Swabs  
- (2) Panduit PLL-11-V3 Laser Lables  
- Tweezers  
- Electrician Scissors  
- Panduit FJPXJ Adhesive  
- Soft Carrying Case