Trilithic Tricorder II CATV Signal Leakage Meter
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Trilithic Tricorder II
In addition to measuring signals for you, Tricorder IIメs sdB feature enables you to measure aural/visual or hi/lo pilot carrier ratios at the simple push of a button. Tricorder II can test uncalibrated leakage (standard) or calibrated if equipped with the CLI (Calibrated Leakage) option. Tricorder II is designed to maintain an active distribution system by performing key tests. This meter is effective for testing from the tap to the customer outlet.
Using the SLM and Leakage Monitor Functions, Tricorder II can identify and measure the following:
- Signal Level
- sdB
- Signal Leakage
- Super Leak Detection
- Battery Voltage
Standard Tricorder Features
All Tricorders are designed to perform a variety of functions which enable them to measure signal levels and monitor leakage.
SLM FUNCTION
A Tricorder tunes a range of 5 ヨ 1000 MHz band in 50 kHz steps or in accordance to a Channel Plan.
Each unit comes with NCTA, IRC HRC and モoff-airヤ Channel Plans. You can also program your meter with two custom Channel Plans. For quick access, you can program the settings for up to ten commonly-used channels.
The Tricorder is equipped to measure carrier-to-noise and hum. Both measurements are semi-automated for speed and convenience.
As an aid to troubleshooting various types of power supply problems, the hum measuring function can differentiate between 60 Hz, 120 Hz and aggregate low frequency noise.
LEAKAGE MONITOR FUNCTION
A basic, uncalibrated leakage monitor is standard for all Tricorders. Operating in this mode, a Tricorder can detect leaks as small as 20 µV/m when you are patrolling on foot. During mobile patrols, sensitivity increases to 5 µV/m. The strength of the leakage is indicated b a bar-graph LCD display as well as an audible tone which rises in pitch as you approach the leak. From the front panel, you can set the meter to monitor any frequency from 107 to 157.25 MHz; selectable in 12.5 kHz steps.
SUPER LEAK DETECTION
The SUPER PLUS Mode enables your Tricorder to utilize leakage test carriers which have been tagged by Trilithicメs CT-2 CHANNEL TAG. This mode is especially useful in overbuilt CATV systems.
When several CATV systems operate in the same area, it is often difficult to determine which system is the source of the detected leak. Use the CT-2 CHANNEL TAG unit to tag your test carrier with a unique, low frequency modulation. This modulation is invisible to the subscriber but is detected easily by the Tricorder. When the SUPER PLUS Mode is activated, your Unit responds ONLY to signals that have been tagged. This means the Meter will not respond to ignition noise, power line interference or leaks from overbuilt CATV systems.
AUTOMATIC LEVEL COMPENSATION
This feature enables your Tricorder to automatically compensate digital measurements on a channel-by-channel basis. Programmable compensations are provided which enable you to assign user-defined compensations to the level readout for any channel included in L1 or L2 Learned Channel Plans and to any of the channels or frequencies stored in the 10 user memories. Use TriSetup (Version 1.06 or higher) to program the desired compensations
For full Trilithic Tricorder II product specifications, please click here: Trilihtic Tricorder II
Trilithic Tricorder II Signal Leakage CATV Meter
Range of 5 � 1000 MHz band in 50 kHz steps
Tricorder II is designed to maintain an active distribution system by performing key tests. This meter is effective for testing from the tap to the customer outlet.
Includes Carrying Case And Accessories As Listed!
Trilithic Tricorder II Tricorder-II Signal Leakage Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- Trilithic Tricorder II Signal Leakage CATV Meter
- (2) BNC To BNC Cables
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Carrying Case