Visual Networks E3 Inline Probe
Condition: Refurbished
Warranty: 90 Day Exchange
Visual Networks E3 Inline Probe
The Visual UpTime® Select? E3 LinkSafe? inline probe ASE complies with Class A standards for countries using E3 ATM lines and supports digital transmission at the E3 rate of 34 Mbps. This ASE supports Multi-Protocol software for deployment in standard ATM networks and IP Transport software for deployment in ATM-based networks that use IP switching. The ASE also includes LinkSafe technology to protect circuit integrity in case of an ASE outage, as well as power failure noti? cation.
The E3 inline probe ASE is designed for deployment at the network demarcation point between a subscriber?s CPE and the WAN. It can be deployed in ATM and mixed frame relay-ATM environments. The ? gure below shows the ASE positioned at the edge of an inter-worked frame relay-to-ATM network, allowing for SLA messaging between a frame relay DLCI and an ATM VPI/VCI.
What are ASEs?
ASEs (Analysis Service Elements) are data collection and network performance monitoring hardware devices placed on a wide area network (WAN) or Local Area Network (LAN) as part of the Visual UpTime Select system,which offers in-depth, real-time, and historical visibility into the performance of your applications infrastructure. In the system, data gathered by ASEs is stored in the Visual UpTime Select server and displayed and analyzed from the Visual UpTime Select Web client. As a service level management tool, ASEs indicate when services are being met, provide warnings when services start to degrade, and send alerts when services are not met.
Features:
- Inband management capabilities
- LinkSafe technology
- Multi-Protocol or IP Transport software
- Service Level Agreement (SLA) metrics
- Application analysis capability
- LAN management port
- Realtime events
Specifications:
| General | |
| Dimensions | 1 EIA unit (1.75?) high x 19? wide rack-mountable chassis |
| Weight | 10 lbs. |
| Data Rate | up to 34 Mbps synchronous |
| Timing Mode | Derived externally from the network |
| Environment | |
| Operating Temperature | 0° to +40°C (+32° to +104° F) |
| Storage Temperature | -20° to +55°C (-4° to +131°F) |
| Clearance Requirement | Minimum of 3? (7.62 cm) space on sides. |
| Operating/Storage Humidity | 10% to 90% non-condensing |
| Power Requirements | |
| Input | 100 to 240 VAC |
| Frequency | 50/60 Hz |
| Input Current Rating | 0.5 Amps |
| Network Interface | |
| Line Rate | 34.368 Mbps |
| Cell Delineation | HEC or PLCP |
| Cell Scrambler | Enable or Disable |
| Connector | 4 BNC (75 ohm), Network Tx and Rx, CPE Tx and Rx |
| Serial Port Interface | |
| Baud Rate | 57600, 19200, or 9600 bps |
| Parity | 8 data bits, no parity |
| Stop Bit | 1 stop bit |
| Electrical Format | EIA RS-232, DTE |
| Connector | 9-pin D, male per EIA-574 |
| Ethernet 10/100BaseT Interface | |
| Bite Rate | 10 or 100 Mbps |
| Connector | 8-pin modular jack: RJ-48 |
For full Fluke Networks Visual Uptime Select product specifications, please click here: Fluke Networks Visual Uptime Select
Visual Networks E3 Inline Probe ASE
The E3 inline probe ASE is designed for deployment at the network demarcation point between a subscriber�s CPE and the WAN
Supports digital transmission at the E3 rate of 34 Mbps
Includes Accessories As Listed
Visual Networks E3 E-3 ASE Inline Probe Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 13756
- Visual Networks E3 Inline Probe ASE (BC# 13756)
- (2) BNC To BNC Cables
- Ethernet Cable
- Power Cord
- RS232 PC Interface Cable