|
HD3 Display
Key Features
- High-resolution 1.8-inch TFT LCD display that can detect 1 µm or smaller
scratches and dirt particles
- Ruggedized enclosure for use in any environment
- GripSwitch™ mode activates the display when held in-hand and deactivates
when released, extending battery life
- Built-in rechargeable NiMH battery pack
- Over 3-hour run time on continuous-ON mode and extended run time in
GripSwitch mode
- Low-battery warning LED (illuminates when battery life is < 30 minutes)
- AC adapter (100–240 VAC/12 VDC) charges NiMH battery and also acts as
alternate power supply
Applications
- View clear detailed fiber end face images on 1.8-in video display
- Use with JDSU probe microscope to inspect both bulkhead (female) and patch
cord (male) sides of fiber interconnect
- Promote proper fiber handling workflow and practice
HD3 Handheld Display
The HD3 display combines performance
and value in a small, durable device that fits comfortably in the user’s hand.
Used with JDSU fiber inspection probe microscopes, the HD3 provides a highly
portable, efficient display for viewing and inspecting fiber connector end
faces. With its durable design and rugged enclosure, the HD3 ensures excellent
performance during field applications. It features a 1.8-inch thin film
transistor (TFT) liquid crystal display (LCD) incorporated into a durable,
rugged enclosure, and powered with a rechargeable NiMH battery. An innovative
GripSwitch conserves battery life with instant-ON functionality when holding the
unit in-hand, and it deactivates, or powers OFF when set down. It is equipped
with a continuous-ON feature for hands-free operation.
HD3 Display Specifications
| Dimensions |
10 x 7.2 x 4.3 cm
(3.9 x 2.8 x 1.7 in) |
| Weight |
230 g (8.1 oz) with probe |
| Video display |
1.8-in (45.7 mm) TFT LCD |
| Connector |
4-pin Hirose for FBP probes; hardwired to FBP or
FBE probes |
| Power source |
Built-in rechargeable NiMH (nickel metal hydride),
800mAH battery or AC adapter (100–200VAC/12VDC) |
| Power modes |
ON (continuous on)GripSwitch (power saving
mode)OFF/CHARGE |
| Run time |
~3 hours (continuous on)Extended run time with use
of GripSwitch (power saving mode) |
|
