|
| SPECIFICATIONS: |
F6222 |
| Application |
Standard |
| Relative Core Power Reading (dB) |
+5 to -40
|
| Insertion Loss (dB) (250µm, 1310/1550) |
< 0.6 / <3.0 |
| Detector Sensitivity (dBm, 1550 nm) |
-40 |
| Fiber Type |
Singlemode, 8-10µm core, 250 µm clear Acrylate
coating |
| Spectral Response (nm) |
850 to 1700 |
| Optical Test Tone Detection |
270 Hz, 1kHz and 2kHz |
| Minimum Fiber Slack |
0.75” (19mm) |
| Power |
One 9V Alkaline Battery |
| Battery Life |
5,000 operations |
| Operating Temperature |
-20 to +50°C |
| Storage Temperature |
-40 to +60°C |
| Humidity |
0 to 90% non-condensing |
| Dimensions (HWD) |
7.75” x 1.25” x 1.0” (197 x 32 x 25mm) |
| Weight |
8.0 oz (227g) |
The Wilcom Model F6222 Telecom Optical Fiber Identifier is a rugged,
easy-to-use installation and maintenance instrument which identifies optical
fibers by detecting the optical signals being transmitted through a fiber. By
utilizing local detection technology (non-destructive macro-bend detection which
does not damage or overstress the fiber), this units eliminates the need to open
the fiber at the splice point for identification; eliminating the probability of
interrupting service.
This Optical Fiber Identifier detects low frequency tones at 270 Hz, 1000 Hz
and 2000 Hz. When traffic is present on the fiber under test, an audible tone
can be heard as well as the traffic direction which is indicated by LEDs
illuminating on the probe.
During installations, maintenance, rerouting, or restorations it is often
necessary to isolate a specific fiber without disrupting service. A light source
such as Wilcom's Model FS1316 used in conjunction with the Optical Fiber
Identifiers can make the job a lot easier.
This Optical Fiber Identifier includes a carrying pouch containing three easy
to use field interchangeable adapter heads to accommodate; 900 µm buffered
fiber, ribbon or 250µm coated fiber and 3mm jacketed fiber.
Features
Rugged Metal Case
- The OFI unit uses the same field proven lightweight rugged metal
housing as the rest of Wilcom's Optical Fiber Identifier product line.
850nm to 1700nm Range
- With the use of InGaAs detectors, the unit can be used on singlemode and
multimode applications.
Audible Tone
- The unit provides an audible tone in the presence of a fiber optic signal.
Core Power Display
- Both the F6222 OFI, and F6222C OFI can display Relative Core Power which
is helpful in identifying bad connectors, splice points, etc.
LED Indication
- LEDs indicate tone detection, Traffic presence, Traffic Direction, and Low
Battery.
Hands-Free-Operation
- With an easy to use thumb lock, hands-free operation can be enabled and
disabled.
Includes:
- Wilcom F6222 OFI Probe
- 900µm Foam Covered Adapter
- 250µm/Rib Foam Perimeter Adapter
- 3mm Slotted Adapter
- User Manual On CD-ROM
- Carrying Case
|
