Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image LIQUIDATION SALE
 



Share
 
  Click Here
To View Our Return Policy
 
Corner Image Corner Image
 

1L197 - 3M Dynatel Model 1332 Far End Device For 965DSP

3M Dynatel Model 1332 Far End Device

For Use With 965DSP, 965DSP-SA and 965DSP-B Mainframes
(965DSP Mainframes Not Included In Sale!)

When used with the Dynatel 965DSP, the FED improves work efficiency by automatically providing some necessary functions at the far-end of the pair under test during pair qualification testing.

FED

3M Dynatel 1342 FED 1342FED Far End Device II Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 30509



Regular Price:$295.00 / Each
Sale Price:$147.50 / Each


 
 
Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
 
Condition Refurbished
Warranty 90 Day Exchange
Included
  • 3M Dynatel 1332 Far End Device w/ Case (BC# 30509)
 
Corner Image Table Bottom Corner Image
Back
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image
3M Dynatel Model 1332 FED
The 3M™ Model 1332 Far End Device (FED) is an accessory device to the 3M™ Dynatel™ 965DSP Subscriber Loop Analyzer. When used with the Dynatel 965DSP, the FED improves work efficiency by automatically providing some necessary functions at the far-end of the pair under test during pair qualification testing. The 965DSP controls the FED using DTMF signaling.

The FED supports the following functions of the 965DSP Auto Test feature:
  • Loop Resistance (shorts Tip to Ring)
  • Resistive Balance (shorts Tip-Ring to Ground)
  • Single Tone & Sweep Loss (sends loss tone)
The 3M FED is contained in a small plastic case with an on/off pushbutton and LED power/battery indicator. It is powered by a 9- volt alkaline battery (supplied). The test lead is terminated with an RJ-45 on one end and three color-coded heavy-duty alligator clips on  the other. The RJ-45 connector plugs into the top of the FED case. The three alligator clips attach to the pair under test.

Specifications:
Size 2.6” X 4.7” X 0.9” (6.6 X 11.9 X 2.3 cm)
Weight 5.6 oz. (159 g.) with battery
Oper. temp 0 to +140°F (-18 to +60°C)
Stor. temp. -40 to +165°F (-40 to +75°C)
Battery life: 40 hours typical
Battery shelf life 2 months (installed)
Replacement battery: Duracell MN1604 or equivalent
Strap resistance: Less than 0.2 ohms
DC input impedance: >100 megohms tip-ring-gnd
AC input impedance: ~100 kohms in series with 470 pf tip-ring
Voltage rating: 250 Vdc, 150 Vac
ID tone frequency: 577 Hz & 1004 Hz
ID tone amplitude: 8 volts p-p no load typical
Transmitted tones: 0 dBm ± 0.5 dBm 400 Hz to 100 kHz
0 dBm ± 1.0 dBm 100 kHz to 1.2 Mhz



For full 3M Dynatel Model 1332 product specifications, please click here: 3M Dynatel Model 1332
Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright 2003- AAATesters.com | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter